Search:
(Files for researchmap) [PDF manual] [Auto-propagate to researchmap]

Research

Field of Study

Strength of Materials, Materials Engineering, Materials Evaluation

Subject of Study

表面改質と評価に関する研究, AE法による金属間化合物の変形機構の解明, AE法による形状記憶合金の疲労損傷評価, ガス漏洩検出技術の開発, 規則不規則変態のダイナミックスに関する研究, AE法によるAl合金の水素損傷評価に関する研究, Ti焼結材の生体適合性に関する研究 (Arc Ion Plating, Acoustic Emission, Smart cutting, 金属間化合物, shape memory alloys)

Book / Paper

Book:

1. Toyoaki Ohmori and Kenichi Yoshida :
普及版センサ技術,
Fujitec Corporation, Tokyo, Jul. 1998.
2. 山口 楠雄 and Kenichi Yoshida :
アコースティック·エミッション,
The Japanese Society for Non-destructive Inspection, Tokyo, May 1990.
3. Toyoaki Ohmori and Kenichi Yoshida :
センサ機能材料マニュアル,
新技術開発センター, Tokyo, Dec. 1986.
4. Toyoaki Ohmori and Kenichi Yoshida :
センサ実用辞典,
Fujitec Corporation, Tokyo, Nov. 1986.

Academic Paper (Judged Full Paper):

1. Hideo Nishino, Toshiro Tanaka, Kenichi Yoshida and Junji Takatsubo :
Simultaneous measurement of the phase and group velocities of Lamb waves in a laser-generation based imaging method,
Ultrasonics, Vol.52, No.4, 530-535, 2012.
(DOI: 10.1016/j.ultras.2011.11.005,   PubMed: 22225595)
2. Hideo Nishino, Tadashi Asano, Yuta Taniguchi, Kenichi Yoshida, Hitoshi Ogawa, Masakazu Takahashi and Yukio Ogura :
Precise measurement of pipe wall thickness in noncontact manner by a circumferential Lamb wave generated and detected by a pair of air-coupled transducers,
Japanese Journal of Applied Physics, Vol.50, No.7, 07HC10-07HC10-7, 2011.
(DOI: 10.1143/JJAP.50.07HC10,   CiNii: 1360566396809790592)
3. Hideo Nishino, Toshiro Tanaka, Saori Katashima and Kenichi Yoshida :
An experimental investigation of mode conversions of the T(0,1) mode guided wave propagating in an elbow pipe,
Japanese Journal of Applied Physics, Vol.50, No.4, 46601-046601-7, 2011.
(DOI: 10.1143/JJAP.50.046601,   CiNii: 1520572358501542656)
4. Takeshi Yasuda, Baojun Pang, Hideo Nishino and Kenichi Yoshida :
Dynamic Behavior Evaluation of Martensitic Transformation in Cu-Al-Ni Shape Memory Alloy Using Acoustic Emission Simulation by FEM,
Materials Transactions, Vol.52, No.3, 397-405, 2011.
(DOI: 10.2320/matertrans.M2010360,   CiNii: 1390282679227306496)
5. Hideo Nishino, Kenichi Yoshida, Tadashi Asano, Yuta Taniguchi, Masakazu Takahashi and Yukio Ogura :
Efficient transduction of circumferential Lamb wave by a pair of line focus type noncontact air-coupled ultrasonic transducers and its application for accurate measurement of pipe wall thickness,
Electric Journal of Advanced Maintenance, Vol.2, No.4, 181-190, 2011.
6. Hideo Nishino, Shuichi Masuda, Yuki Mizobuchi, Tadashi Asano and Kenichi Yoshida :
Long range testing of a welded elbow pipe using the T(0,1) mode ultrasonic guided wave,
Japanese Journal of Applied Physics, Vol.49, No.11, 116602-1-116602-6, 2010.
(DOI: 10.1143/JJAP.49.116602,   CiNii: 1520853832544503808)
7. Hideo Nishino, Ogura Keiji, Tanaka Toshiro and Kenichi Yoshida :
Highly Sensitive Detection of Defects in Piping Using Multireflecting Guided Wave Energy Trapping Method,
Japanese Journal of Applied Physics, Vol.49, No.6, 066602-1-066602-7, 2010.
(DOI: 10.1143/JJAP.49.066602,   CiNii: 1520853832422449920)
8. Hideo Nishino, Ogura Keiji, Komatsu Toyokazu and Kenichi Yoshida :
Defect detection of a pipe using a guided wave generated by an efficient transduction with a reflector,
Japanese Journal of Applied Physics, Vol.48, No.9, 094501-1-094501-7, 2009.
(DOI: 10.1143/JJAP.48.094501,   CiNii: 1520853832250093056)
9. Hideo Nishino, Tanaka Yasuhiro, Kato Yasuhisa and Kenichi Yoshida :
Efficient Generation and Detection of a Guided Wave in a Pipe using Guided Wave Reflectors,
Journal of Solid Mechanics and Materials Engineering, Vol.3, No.2, 267-277, 2009.
(DOI: 10.1299/jmmp.3.267,   CiNii: 1390282680240910208)
10. Kenichi Yoshida, Takeshi Yasuda, Shinya Kondo and Hideo Nishino :
EXPERIMENTAL SIMULATION AND DYNAMIC BEHAVIOR OF THE AE DUE TO MARTENSITIC TRANSFORMATION USING SHEAR WAVE TRANSMISSION SENSOR,
Journal of Acoustic Emission, Vol.26, 270-278, 2008.
11. Hideo Nishino, Masuda Shuichi, Kenichi Yoshida, Takahashi Masakazu, Hoshino Hidekazu, Ogura Yukio, Kitagawa Hideaki, Kusumoto Junichi and Kanaya Akihiro :
Theoretical and Experimental investigations of transmission coefficients of longitudinal waves through metal plates immersed in air for uses of air coupled ultrasounds,
Materials Transactions, Vol.49, No.12, 2861-2867, 2008.
(DOI: 10.2320/matertrans.MRA2008270,   CiNii: 1390282679227682176)
12. Hideo Nishino, Ryuichi Yokoyama, Keiji Ogura, Hironori Kondo and Kenichi Yoshida :
Tone-burst generation of circumferential guided waves by a bulk shear wave sensor and their wide-range time-frequency analyses,
Japanese Journal of Applied Physics, Vol.47, No.5B, 3885-3893, 2008.
(DOI: 10.1143/JJAP.47.3885,   CiNii: 1520009408384054912)
13. Hideo Nishino, Yokoyama Ryuji, Kondo Hironori and Kenichi Yoshida :
Generation of circumferential guided waves using a bulk shear wave sensor and their mode identification,
Japanese Journal of Applied Physics, Part 1 (Regular Papers & Short Notes), Vol.46, No.7B, 4568-4576, 2007.
(DOI: 10.1143/JJAP.46.4568,   CiNii: 1520572357559651072)
14. Hideo Nishino, Kenichi Yoshida, 長 秀雄 and 竹本 幹男 :
Novel method of estimating the thickness/diameter using the primary wave velocity of a guided wave in a pipe and its verification with wide-band laser ultrasound,
The Journal of the Acoustical Society of Japan, Vol.63, No.1, 13-20, 2007.
(CiNii: 1390001206566187264)
15. Yuki Sakamoto, Hidetaka Sezaki, Kenichi Yoshida and Kenzo Asaoka :
Relationship between corrosion and mechanical strength of annealed titanium,
Journal of Japanese Society for Dental Products, Vol.20, No.2, 3-13, 2006.
(CiNii: 1574231875812769280)
16. Kenichi Yoshida, Takeshi Yasuda, Daiki Tani and Hideo Nishino :
Dynamic Behavior of Two Types of Martensitic Transformations in Cu-Al-Ni Shape Memory Alloy Single Crystal by Acoustic Emission Method,
Advanced Materials Research, Vol.13-14, 305-312, 2006.
(DOI: 10.4028/www.scientific.net/AMR.13-14.305,   Elsevier: Scopus)
17. Hideo Nishino, Kenichi Yoshida, Cho Hideo and Takemoto Mikio :
Propagation phenomena of wideband guided waves in a bended pipe,
Ultrasonics, Vol.44, e1139-e1143, 2006.
(DOI: 10.1016/j.ultras.2006.05.155,   Elsevier: Scopus)
18. Keitaro Horikawa, yuusuke Takeuchi, Kenichi Yoshida and Hidetoshi Kobayashi :
Visualization of hydrogen during fatigue fracture in a Al-Mg-Si alloy,
Journal of Japan Institute of Light Metals, Vol.56, No.4, 210-213, 2006.
(DOI: 10.2464/jilm.56.210,   CiNii: 1520009408294846976)
19. Yuki Sakamoto, Kenzo Asaoka, Masayuki Kon, Toshio Matsubara and Kenichi Yoshida :
Chemical surface modification of high-strength porous Ti compacts by spark plasma sintering,
Bio-Medical Materials and Engineering, Vol.16, No.2, 83-91, 2006.
(PubMed: 16477117,   Elsevier: Scopus)
20. Kenichi Yoshida, Yuji Masui, Takuo Nagamachi and Hideo Nishino :
Boron Effects of AE Event Rate Peaks during Tensile Deformation of Ni3Al Intermetallic Compound,
Journal of Acoustic Emission, Vol.23, 189-195, 2005.
21. Kenichi Yoshida, Kotaro Hanabusa and Takuo Nagamachi :
Acoustic Emission Behavior of Martensitic Transformation in Early Stage during Deformation of Cu-Al-Ni Shape Memory Alloy Single Crystals,
Journal of Acoustic Emission, Vol.22, 159-168, 2004.
22. Keitaro Horikawa and Kenichi Yoshida :
Visualization of Hydrogen Distribution in Tensile-Deformed Al-5%Mg Alloy Investigated by Means of Hydrogen Microprint Technique with EBSP Analysis,
Journal of the Japan Institute Metals, Vol.68, No.12, 1043-1046, 2004.
(DOI: 10.2320/jinstmet.68.1043)
23. Kenichi Yoshida, Yoshiaki Akematsu, Kiyoshi Sakamaki and Keitaro Horikawa :
EFFECT OF PINHOLE SHAPE WITH DIVERGENT EXIT ON AE CHARACTERISTICS DURING GAS LEAK,
Journal of Acoustic Emission, Vol.21, 223-229, 2004.
24. Keitaro Horikawa and Kenichi Yoshida :
Visualization of Hydrogen Distribution in Tensile-Deformed Al-5%Mg Alloy Investigated by Means of Hydrogen Microprint Technique with EBSP Analysis,
Materials Transactions, Vol.45, No.2, 315-318, 2004.
(DOI: 10.2320/matertrans.45.315,   CiNii: 1390001204251650560,   Elsevier: Scopus)
25. Keitaro Horikawa, Kenichi Yoshida, Akihiro Ohmori and Kiyoshi Sakamaki :
ACOUSTIC EMISSION CAUSED BY ENVIRONMENTAL EMBRITTLEMENT OF AN Al-Mg-Si ALLOY,
Journal of Acoustic Emission, Vol.21, 206-212, 2003.
26. 明松 圭昭, Kenichi Yoshida, Kiyoshi Sakamaki and Keitaro Horikawa :
Characteristics of Acoustic Emission due to Gas Leak through Several Pinholes,
Journal of JSNDI, Vol.52, No.10, 565-569, 2003.
27. Keitaro Horikawa, Kenichi Yoshida, Akihiro Ohmori and Kiyoshi Sakamaki :
AE signals caused by environmental embrittlement of an Al-Mg-Si alloy deformed at slow strain rates in laboratory air,
Journal of Japan Institute of Light Metals, Vol.53, No.4, 147-151, 2003.
(DOI: 10.2464/jilm.53.147,   CiNii: 1520572357987077504,   Elsevier: Scopus)
28. Keitaro Horikawa, Kenichi Yoshida and Kiyoshi Sakamaki :
Acoustic Emission Behavior during Tensile Deformation and Fracture of Al-Mg-Si Base Alloys,
Materials Science Forum, Vol.396-402, 1405-1410, 2002.
29. 明松 圭昭, Kenichi Yoshida, Kiyoshi Sakamaki, Keitaro Horikawa and 西川 充洋 :
ガス漏洩時のAE特性に及ぼすピンホール形状およびガス圧力の影響,
Journal of JSNDI, Vol.51, No.7, 432-437, 2002.
(CiNii: 1520009407722056320)
30. Keitaro Horikawa, Kenichi Yoshida, Kiyoshi Sakamaki, Helder Nguelume and Akihiro Ohmori :
Effects of excess silicon and aging condition on acoustic emission behavior of an Al-Mg-Si alloy during tensile test,
Journal of Japan Institute of Light Metals, Vol.52, No.2, 71-75, 2002.
(DOI: 10.2464/jilm.52.71,   CiNii: 1520009407671185664,   Elsevier: Scopus)
31. Kenichi Yoshida, Yuqin Wang, Keitaro Horikawa, Kiyoshi Sakamaki and Kenji Kajiyama :
MONITORING OF MICRO-CRACKING DURING HEATING OF HYDROGEN DOPED GERMANIUM AND SILICON SINGLE CRYSTALS BY ACOUSTIC EMISSION METHOD,
Journal of Acoustic Emission, Vol.19, 22-34, 2001.
32. Kenichi Yoshida, Shinichi Kihara and Kiyoshi Sakamaki :
Evaluation of Martensitic Transformation Dynamics of Cu-Al-Ni Shape Memory Alloy Single Crystal by Acoustic Emission Method,
Journal of Acoustic Emission, Vol.18, No.3, 68-74, 2000.
33. Kenzo Asaoka, Kenichi Yoshida, Kenichi Hamada and Masayuki Kon :
Acoustic emission and thermal expansion measurements for gypsum-bonded investment in casting flask during thermal processing,
Dentistry in Japan, Vol.35, No.3, 89-93, 1999.
34. Kenichi Yoshida, Kenichi Hamada and Masayuki Kon :
Acoustic Emission and Thermal Expansion Measurements for Gypsum-bonded Investment in Casting Flask during Thermal Processing,
Dentistry in Japan, Vol.35, No.3, 89-93, 1999.
35. Kyo-Han Kim, Kenzo Asaoka and Kenichi Yoshida :
Acoustic emission signals from gypsum-bonded dental casting molds during thermal processing,
Dental Materials Journal, Vol.17, No.1, 11-20, 1998.
(DOI: 10.4012/dmj.17.11,   PubMed: 9663058)
36. Kenichi Yoshida, Toshiharu Saito, Ai Zhu, Hitoshi Takagi and Kiyoshi Sakamaki :
Acoustic emission behaviors during tensile deformation of Ni3Al intermetallic compound,
Intermetallics, Vol.6, No.1, 1-5, 1998.
(DOI: 10.1016/S0966-9795(97)00034-4,   Elsevier: Scopus)
37. Kenichi Yoshida, Hitoshi Takagi and Kiyoshi Sakamaki :
Evaluation of fatigue in Cu-Al-Ni shape memory alloy single crystals by acoustic emission method,
Journal of JSNDI, Vol.46, No.11, 821-829, 1997.
38. Ai Zhu, Kenichi Yoshida, Hitoshi Takagi and Kiyoshi Sakamaki :
The effects of lamellar structure in the TiAl intermetallic compound on its acoustic emission behavior during tensile deformation,
Intermetallics, Vol.4, No.6, 483-488, 1996.
(DOI: 10.1016/0966-9795(96)00025-8)
39. Kenichi Yoshida, Pang Baojun, Ai Zhe, Kiyoshi Sakamaki and Hitoshi Takagi :
Disacontinuouse yielding and acoustic emission ine Al-LI-Cu-Mg-Zr alloy,
Journal of the Japan Institute Metals, Vol.60, No.9, 809-815, 1996.
40. Kiyoshi Sakamaki, Shingo Tanabe, Hitoshi Takagi and Kenichi Yoshida :
Prediction method of stress fracture location in tibia subjected to lateral force,
Journal of Clinical Sports Medicine, Vol.13, No.7, 825-829, 1996.
41. Kiyoshi Sakamaki, Shingo Tanabe, Hitoshi Takagi and Kenichi Yoshida :
Prediction method of stress fracture location in tibia subjected to lateral force,
Journal of Clinical Sports Medicine, Vol.13, No.3, 313-317, 1996.
42. Kiyoshi Sakamaki, Hitoshi Takagi, Yasushi Nishiyama and Kenichi Yoshida :
Effect of NiO content on mechanical properties of Ni-NiO composites prepared by powder metallurgy,
Transactions of The Japan Society of Mechanical Engineers, Series A, Vol.62, No.594, 299-305, 1996.
(DOI: 10.1299/kikaia.62.299)
43. Hitoshi Takagi, Yasushi Nishiyama, Kiyoshi Sakamaki and Kenichi Yoshida :
Microstructere and hardness of Ni-NiO composites prepared by powder metallurgy,
Transactions of The Japan Society of Mechanical Engineers, Series A, Vol.61, No.589, 1933-1939, 1995.
(DOI: 10.1299/kikaia.61.1933)
44. Kenichi Yoshida, Kenzo Asaoka and Masashi Yamanaka :
Acoustic emission measurements during order-disorder transformation and isothermal ordering process of Pd-Cu alloys,
Journal of the Japan Institute Metals, Vol.58, No.9, 989-993, 1994.
45. Kiyoshi Sakamaki, Kenichi Yoshida, Hitoshi Takagi, Hitomi Sato, Shingo Tanabe, Akira Takahashi and Noriyuki Takesue :
A biomechanical study of stress fractures of the tibia (Behavior under bending moment),
Proceedings of the 37th Japan Congress on Materials Research, 222-225, 1994.
46. Kiyoshi Sakamaki, Hitoshi Takagi and Kenichi Yoshida :
Elastic-plastic FEM analysis of MMC with interface phase,
Proceedings of the 37th Japan Congress on Materials Research, 169-173, 1994.
47. Kiyoshi Sakamaki, Kenichi Yoshida, Hitoshi Takagi and Masahiro Genda :
Fatigue crack initiation and growth of Cu-Al-Ni shape memory alloy single crystals,
Proceedings of the 37th Japan Congress on Materials Research, 52-57, 1994.
48. Hitoshi Takagi, Kiyoshi Sakamaki, Kenichi Yoshida and Yoshihito Kondo :
Mechanical properties and AE behavior of particle-dispersed Nickel-base alloys prepared by powder metallurgy,
Transactions of The Japan Society of Mechanical Engineers, Series A, Vol.59, No.561, 1313-1318, 1993.
(DOI: 10.1299/kikaia.59.1313)
49. Hitoshi Takagi, Kiyoshi Sakamaki, Kenichi Yoshida and Yasuyuki Ohtsuka :
Structure controlling of Ni-NiO eutectic fibrous composites produced by unidirectional solidification,
Proceedings of the 36th Japan Congress on Materials Research, 37-41, 1993.
50. Kenzo Asaoka, Kenichi Yoshida and Kiyoshi Sakamaki :
Effect of transient stress on acoustic emission behaviour during firing of dental porcelain,
Journal of Materials Science, Vol.27, No.11, 3118-3122, 1992.
(DOI: 10.1007/BF01154127)
51. Kenzo Asaoka and Kenichi Yoshida :
金属焼付陶材の加熱/冷却過程でのAE挙動,
The Journal of the Japanese Society for Dental Materials and Devices, Vol.11, No.5, 800-807, 1992.
52. Hitoshi Takagi, Yasuyuki Ohtsuka, Kiyoshi Sakamaki and Kenichi Yoshida :
Deformation and fracture characteristics of unidirectionally solidified Ni-NiO eutectic alloys at room temperature,
Proceedings of the 35th Japan Congress on Materials Research, 29-34, 1992.
53. Hitoshi Takagi, Yasuyuki Ohtsuka, Kiyoshi Sakamaki and Kenichi Yoshida :
Microstructure of unidirectionally solidified Ni-NiO eutectic alloys,
Proceedings of the 35th Japan Congress on Materials Research, 23-28, 1992.
54. Kenichi Yoshida, Hiroyuki Goda, Hitoshi Takagi and Kiyoshi Sakamaki :
Fracture toughness of ceramic materials in the case of application of acoustic emission method to indentation microfracture method,
Journal of JSNDI, Vol.40, No.11, 725-729, 1991.
55. Hitoshi Takagi, Toru Kato, Kenichi Yoshida and Kiyoshi Sakamaki :
Dislocation creep and substructure of Ni-NiO alloy,
Transactions of The Japan Society of Mechanical Engineers, Series A, Vol.57, No.542, 2422-2426, 1991.
(DOI: 10.1299/kikaia.57.2422)
56. Hitoshi Takagi, Seiji Sato, Kiyoshi Sakamaki and Kenichi Yoshida :
Effect of NiO addition on the flow stress of Nickel at room temperature,
Proceedings of the 34th Japan Congress on Materials Research, 137-141, 1991.
57. Hitoshi Takagi, Yoshihito Kondo, Kiyoshi Sakamaki and Kenichi Yoshida :
The effect of sintering temperature on elastic modulus and mechanical properties of NiO,
Proceedings of the 34th Japan Congress on Materials Research, 143-147, 1991.
58. Kunihiko Ohashi, Toshiaki Kobayashi, Hitoshi Takagi, Kenichi Yoshida and Kiyoshi Sakamaki :
Fatigue crack initiation and growth of Cu-Al-Ni Shape-memory alloys,
Transactions of The Japan Society of Mechanical Engineers, Series A, Vol.56, No.532, 2369-2373, 1990.
(DOI: 10.1299/kikaia.56.2369)
59. Hitoshi Takagi, Toru Kato, Kenichi Yoshida and Kiyoshi Sakamaki :
Creep rupture behavior in particle-strengthened Ni-NiO eutectic alloys,
Transactions of The Japan Society of Mechanical Engineers, Series A, Vol.56, No.526, 1417-1420, 1990.
(DOI: 10.1299/kikaia.56.1417)
60. Kiyoshi Sakamaki, Kenichi Yoshida, Hitoshi Takagi and Masafumi Yoshida :
Effect of aging on the acoustic emission behaviour during tensile deformation of a Al-Li-Cu-Mg-Zr alloy,
Transactions of The Japan Society of Mechanical Engineers, Series A, Vol.55, No.513, 1063-1066, 1989.
(DOI: 10.1299/kikaia.55.1063)
61. Hitoshi Takagi, Kenichi Yoshida and Kiyoshi Sakamaki :
Creep properties of Ni-NiO alloys at intermediate temperature,
Proceedings of the 32nd Japan Congress on Materials Research, 83-89, 1989.
62. 高坪 純治 and Kenichi Yoshida :
AE Source Wave Analysis,
Transactions of The Japan Society of Mechanical Engineers, Series C, Vol.51, No.468, 1982-1990, 1985.
63. 五弓 勇雄, 木原 諄二, Kenichi Yoshida and 小松 弘 :
中程度の摩擦状態における圧下力関数と軟鋼の熱間圧延潤滑,
塑性と加工, Vol.16, No.168, 18-24, 1975.

Academic Paper (Unrefereed Paper):

1. Yuki Sakamoto, Kenzo Asaoka, Masayuki Kon, Toshio Matsubara and Kenichi Yoshida :
Porous titanium compacts as biomaterials for hard tissue replacement,
Porous Metals and Metal Foaming Technology (JIMIC=4), 55-58, 2006.
2. M Yamanaka, Kenzo Asaoka, Kenichi Yoshida and Kiyoshi Sakamaki :
Acoustic emission behavior during heating/cooling of Pd-Cu alloys,
Proceedings of the 11th International Acoustic Emission Symposium, 537-543, 1992.
3. 高坪 純治, Kenichi Yoshida, 大谷 敏昭 and 横川 洪 :
AE位置標定法の高精度化,
中国工業技術試験所報告, Vol.20, 11-23, 1983.
4. Kenichi Yoshida and 高坪 純治 :
AE原波形解析,
中国工業技術試験所報告, Vol.17, 1-11, 1982.
5. Kenichi Yoshida, 高坪 純治 and 三井 武良男 :
60 kg/mm2 級高耐候性鋼の疲労損傷に伴うAE,
中国工業技術試験所報告, Vol.13, 89-104, 1981.
6. Kenichi Yoshida, 三井 武良男 and 高坪 純治 :
耐候性鋼の破壊過程におけるAE,
中国工業技術試験所報告, Vol.11, 15-28, 1980.
7. Kenichi Yoshida and 三井 武良男 :
AE法による溶接欠陥の評価,
中国工業技術試験所報告, Vol.9, 73-85, 1980.
8. Kenichi Yoshida and 三井 武良男 :
AE法による応力腐食割れの検出,
中国工業技術試験所報告, Vol.9, 87-99, 1980.
9. 和田 良澄 and Kenichi Yoshida :
多重切り欠き傷の平滑化法による亜鉛の表面拡散の測定について,
横浜国立大学材料基礎工学研究, Vol.8, 51-66, 1972.
10. 和田 良澄, 鈴木 弥栄男 and Kenichi Yoshida :
粒界溝の発達法によるニッケルの表面拡散の研究,
横浜国立大学材料基礎工学研究, Vol.7, 73-86, 1971.

Academic Letter:

1. Hideo Nishino and Kenichi Yoshida :
Simple method of generating for circumferential shear horizontal waves in a pipe and their mode identifications,
Acoustical Science and Technology, Vol.27, No.6, 389-392, 2006.
(DOI: 10.1250/ast.27.389,   CiNii: 1390282680067035264)

Proceeding of International Conference:

1. Yasuda Takeshi, Pang Baojun, Hideo Nishino and Kenichi Yoshida :
Growth Behavior Monitoring of Martensitic Transformation in Cu-Al-Ni Shape Memory Alloy Based on AE Waveform Simulation Utilizing FEM,
Progress in Acoustic Emission XV, Vol.20, 61-66, Kumamoto, Nov. 2010.
2. Yuusuke Kuniyasu, Yuuichi Tokuyama, Hideo Nishino and Kenichi Yoshida :
Evaluation of AE Behavior during the Tensile Deformation of Al-Mg-Si Alloys with Different Heat Treatment,
Progress in Acoustic Emission XV, Vol.20, 55-60, Kumamoto, Sep. 2010.
3. Kenichi Yoshida, Laodeno Nunez Rem and Hideo Nishino :
Examination and Generation Condition of Screech Tone Detected during Gas Leakage on Pipe Using Acoustic Emission Technology,
Proceedings of the 29th European Conference on Acoustic Emission Testing, Vol.29, 41-1-41-8, Wien, Sep. 2010.
4. Takeshi Yasuda, Takuo Nagamachi, Hideo Nishino, Baojun Pang and Kenichi Yoshida :
Observation for Proportion of Super-elastic Martensitic Transformation in Cu-Al-Ni Shape Memory Alloy with AE Simulation,
Proceedings of the 29th European Conference on Acoustic Emission Testing, Vol.29, 24-1-24-9, Wien, Sep. 2010.
5. Hideo Nishino, Tadashi Asano, Kenichi Yoshida, Hitoshi Ogawa, Masakazu Takahashi and Yukio Ogura :
Noncontact and accurate measurement of pipe wall thinning by a circumferential guided wave using a pair of air-coupled transducers,
Advances in Maintenance and Condition Diagnosis Technologies towards Sustainable Society, Proceedings of the 23rd International Congress on Condition Monitoring and Diagnositic Engineering Management, 163-168, Nara, Jun. 2010.
6. Hideo Nishino and Kenichi Yoshida :
Efficient defect detection of a pipe using multirefelcting guided wave energy trapping method,
The fourth Japan-US Symosium on Emerging NDE Capabilities for a Safer World, US Hawaii, Jun. 2010.
7. Kenichi Yoshida, Nunez Rem Laodeno and Hideo Nishino :
Frequency Variations and Surface Loss Analysis of Generated AE Signals during Gas Leakage on Artificial Damaged Pipe,
Progress in Acoustic Emission XIV ( Proc. of The 19th International Acoustic Emission Symposium ), Vol.19, 523-530, Kyoto, Dec. 2008.
8. Kenichi Yoshida, Takeshi Yasuda, Shinya Kondo and Hideo Nishino :
Growth Development of Martensitic Transformation Behavior in Cu-Al-Ni Shape Memory Alloy Based on Experimental AE Simulation,
Progress in Acoustic Emission XIV ( Proc. of The 19th International Acoustic Emission Symposium ), Vol.19, 171-178, Kyoto, Dec. 2008.
9. Kenichi Yoshida, Masaki Numaue, Yusuke Kuniyasu and Hideo Nishino :
Acoustic Emission Behavior during Deformation of Al-Mg-Si Alloys,
Progress in Acoustic Emission XIV ( Proc. of The 19th International Acoustic Emission Symposium ), Vol.19, 151-156, Kyoto, Dec. 2008.
10. Hideo Nishino, Kato Yasuhisa, Tanaka Yasuhiro and Kenichi Yoshida :
Efficient generation and detection of a guided wave in a pipe using guided wave reflectors,
Proc. 3rd International Conference on Materials and Processing 2008, Northwestern, Oct. 2008.
11. Kenichi Yoshida, Takeshi Yasuda, Shinya Kondo and Hideo Nishino :
Experimental Simulation and Dynamic Behavior of The AE due to Martensitic Transformation Using Shear Wave Transmission Sensor,
Proc. of the 28th European Conference on Acoustic Emission Testing (EWGAE-2008), Vol.28, 280-285, Krakow(Poland), Sep. 2008.
12. Kenichi Yoshida, Nunez Rem Laodeno and Hideo Nishino :
Acoustic Emission Waveform Analysis of Gas Leakage on Pipe with Various Types of Artificial Defects,
Advances in Acoustic Emission-2007 (Proc. The Sixth International Conference on Acoustic Emission), Vol.6, 173-178, Lake Tahoe, Nevada, USA, Oct. 2007.
13. Kenichi Yoshida, Hirokazu Miyake, Naoki Hamada and Hideo Nishino :
Acoustic Emission Caused by Fatigue Fracture of Al-Mg-Si Alloys,
Progress in Acoustic Emission XIII ( Proc. of The 18th International Acoustic Emission Symposium ), Vol.18, 447-453, Tokyo, Jul. 2006.
14. Kenichi Yoshida, Takeshi Yasuda, Daiki Tani and Hideo Nishino :
EValuation of Two Types of Martensitic Transformations in Cu-Al-Ni Shape Memory Alloy Single Crystal by Acoustic Emission Waveform Analysis,
Progress in Acoustic Emission XIII ( Proc. of The 18th International Acoustic Emission Symposium ), Vol.18, 197-204, Tokyo, Jul. 2006.
15. Hideo Nishino, Kimura Motoki and Kenichi Yoshida :
Theoretical and experimental characteristics of guided SH waves propagating along the circumferential direction of a pipe,
The 1st International conference on Advanced Nondestructive Evaluation, 174, Cheju, Nov. 2005.
16. Yuki Sakamoto, Kenzo Asaoka, Masayuki Kon, Toshio Matsubara and Kenichi Yoshida :
Porous titanium compacts as biomaterials for hard tissue replacement,
4th International Conference on Porous Metals and Metal Foaming Technology, Kyoto, Sep. 2005.
17. Hideo Nishino, Kenichi Yoshida, Cho Hideo and Takemoto Mikio :
Propagation phenomena of wideband guided waves in an bended pipe,
WCU-UI 2005, 89-90, Beijing, Aug. 2005.
18. Kenichi Yoshida, Yuji Masui, Takuo Nagamachi and Hideo Nishino :
Effect of Boron Additives on Two Peaks of AE Event Rate during Tensile Deformation of Ni3Al Intermetallic Compound,
Progress in Acoustic Emission XII ( Proc. of The 16th International Acoustic Emission Symposium ), Vol.12, 225-232, Tokyo, Nov. 2004.
19. Kenichi Yoshida, Tetsuro Kawano, Yoshiaki Akematsu and Hideo Nishino :
Frequency Characteristics of Acoustic Emission Waveforms during Gas Leak,
Proc. of the 26th European Conference on Acoustic Emission Testing (EWGAE-2004), Vol.1, 371-379, Berlin, Sep. 2004.
20. Kenichi Yoshida, Kotaro Hanabusa and Takuo Nagamachi :
Acoustic Emission Behavior of Martensitic Transformation in Early Stage during Deformation of Cu-Al-Ni Shape Memory Alloy Single Crystals,
Proc. of the 26th European Conference on Acoustic Emission Testing (EWGAE-2004), Vol.1, 283-291, Berlin, Sep. 2004.
21. Keitaro Horikawa, Hidetoshi Kobayashi, Yusuke Takeuchi and Kenichi Yoshida :
Acoustic emission of Fatigue-Deformed Aluminum Alloys for Automotive Panels,
Proc. of the 26th European Conference on Acoustic Emission Testing (EWGAE-2004), Vol.1, 323-330, Berlin, Sep. 2004.
22. Yoshiaki Akematsu, Kenichi Yoshida, Keitaro Horikawa and Kiyoshi Sakamaki :
Effect of Pinhole Shape with Divergent Exit on AE Characteristics during Gas Leak,
Proceedings of The 16th International Acoustic Emission Symposium, 319-324, Tokushima, Nov. 2002.
23. Kenichi Yoshida, Keitaro Horikawa and Kiyoshi Sakamaki :
Effect of Boron Additives on Acoustic Emission Behavior during Tensile Deformation of Ni-Al Intermetallic Compounds,
Proceedings of The 16th International Acoustic Emission Symposium, 15-22, Tokushima, Nov. 2002.
24. Keitaro Horikawa, Kenichi Yoshida, Akihiro Ohmori and Kiyoshi Sakamaki :
Acoustic Emission Caused by Embironmental Embrittlement of An Al-Mg-Si Alloy,
Proceedings of The 16th International Acoustic Emission Symposium, 266-273, Tokushima, Nov. 2002.
25. Yoshiaki Akematsu, Keitaro Horikawa, Kenichi Yoshida and Kiyoshi Sakamaki :
Characteristics of acoustic emission waveform during gas leak from a pipe,
Proc. of the 25th European Conference on Acoustic Emission Testing (EWGAE-2002), Vol.1, 15-20, Prague, Sep. 2002.
26. Kenichi Yoshida, Keitaro Horikawa and Kiyoshi Sakamaki :
Characteristics of acoustic emission behavior during tensile deformation of Ni-Al intermetallic compounds with boron additive,
Proc. of the 25th European Conference on Acoustic Emission Testing (EWGAE-2002), Vol.2, 287-294, Prague, Sep. 2002.
27. Keitaro Horikawa, Kenichi Yoshida and Kiyoshi Sakamaki :
Acoustic emission due to the intergranular fracture of Al-Mg-Si base alloys,
Proc. of the 25th European Conference on Acoustic Emission Testing (EWGAE-2002), Vol.1, 239-246, Prague, Sep. 2002.
28. Yoshiaki Akematsu, Kenichi Yoshida, Kiyoshi Sakamaki, Keitaro Horikawa and Mitsuhiro Nishikawa :
Detection and inspection of acoustic emission (AE) behavior during gas leak from a pipe,
The 1st International On-Board Seminar for the Development of Environment-friendly Technology, 107-112, Tokushima, Oct. 2001.
29. Kenichi Yoshida, Yu-Qin Wang, Keitaro Horikawa, Kiyoshi Sakamaki and Kenji Kajiyama :
Monitoring of Microcracking during Heating Process of Hydrogen Ion Doped Germanium and Silicon Single Crystals by Acoustic Emission Method,
Proc. 15th Int. AE Symp., Progress in Acoustic Emission X, 35-41, Tokyo, Sep. 2000.
30. Ryohei Yamashita, Kenichi Yoshida, Kiyoshi Sakamaki and Keitaro Horikawa :
Change of Acoustic Emission Activity due to Ductility Improvement of NiAl Intermetallic Compound,
15th Int. AE Symp., Progress in Acoustic Emission X, 331-336, Tokyo, Sep. 2000.
31. Kenichi Yoshida, Shinichi Kihara and Kiyoshi Sakamaki :
Evaluation of martensitic transformation dynamics of Cu-Al-Ni shape memory alloy single crystals by acoustic emission method,
Proc. 24th European Conf. on Acoustic Emission Testing, 107-112, Senlis, May 2000.
32. Mayumi Luciana Hirakata, Kenzo Asaoka and Kenichi Yoshida :
Internal fracture of phosphate-bonded investment during mechanical tests,
Journal of Dental Research, Vol.79, No.Spec, 547, Washington, D.C., Apr. 2000.
33. Ryohei Yamashita, Kenichi Yoshida, Kiyoshi Sakamaki and Keitaro Horikawa :
Acoustic Emission Behavior during Tensile Deformation of NiAl Intermetallic Compound,
Proc. 2nd Int. Conf. on Advanced Materials Development and Performance, 912-915, Tokushima, Nov. 1999.
34. Masatoshi Kunisawa, Kiyoshi Sakamaki, Kenichi Yoshida and Keitaro Horikawa :
Evaluation of TiN Coating Film due to Acoustic Emission,
Proc. 2nd Int. Conf. on Advanced Materials Development and Performance, 722-725, Tokushima, Nov. 1999.
35. Kenichi Yoshida, Shinichi Kihara, Keitaro Horikawa and Kiyoshi Sakamaki :
Evaluation of Phase Transformation Dynamics of Cu-Ai-Ni Shape Memory Alloy Single Crystal by Acoustic emission Method,
Proc. 2nd Int. Conf. on Advanced Materials Development and Performance, 304-307, Tokushima, Nov. 1999.
36. Keitaro Horikawa, Kenichi Yoshida and Kiyoshi Sakamaki :
High Temperature Embrittlement Caused by Trace Elements and Its Suppression by Additional Elements in an Al-5.5mol%Mg Alloy,
Proc. 2nd Int. Conf. on Advanced Materials Development and Performance, 268-273, Tokushima, Nov. 1999.
37. Kenichi Yoshida, Shinichi Kihara and Kiyoshi Sakamaki :
Acoustic Emission Behavior during Martensitic Transformation of Cu-Al-Ni Shape Memory Alloy Single Crystal,
Proc. Int. Conf. on Solid-Solid Phase Transformations '99, 919-922, Kyoto, May 1999.
38. Kenichi Yoshida, Yasutomo Iwata, Hitoshi Takagi and Kiyoshi Sakamaki :
Effect of Boron Additive on Acoustic Emission Behavior during Tensile Deformation of Ni3Al Intermetallic Compound Single Crystals,
Proceedings of the 14th Internatinal AE Symposium, Progress in Acoustic Emission IX, 28-35, Hawaii, Aug. 1998.
39. Kenichi Yoshida, Hitoshi Takagi and Kiyoshi Sakamaki :
Effect of grain boundaries on acoustic emission behavior during tensile deformation of Ni3Al intermetallic compound,
Proceedings of the 23rd European Conference on Acoustic Emission Testing, 99-103, Wien, May 1998.
40. Kyo-Han Kim, Y Sakamoto, Kenichi Yoshida and Kenzo Asaoka :
Effect of composition on AE signals from gypsum-bonded investment,
Transactions of the 3rd International Congress on Dental Materials, 139, Honolulu, Nov. 1997.
41. Kenichi Yoshida, Hitoshi Takagi and Kiyoshi Sakamaki :
Deformation characteristics of Ni3Al intermetallic compound by acoustic emission method,
Proceedings of International Conference on Thermomechanical Processing of Steels and Other Materials, 1441-1447, Wollongong, Jul. 1997.
42. Kenichi Yoshida, Toshiharu Saito, Ai Zhu, Hitoshi Takagi and Kiyoshi Sakamaki :
Acoustic emission behaviors during tensile deformation of Ni3Al intermetallic compound,
Proceedings of the 13th Internatinal AE Symposium, Progress in Acoustic Emission VIII, 175-180, Nara, Nov. 1996.
43. Kenichi Yoshida, Pang Baojun, Ai Zhu, Kiyoshi Sakamaki and Hitoshi Takagi :
Acoustic emission and discontinuous yield behaviours in Al-Li-Cu-Mg-Zr Alloy,
Proceedings of the 22nd European Conference on Acoustic Emission Testing, 21-26, Aberdeen, May 1996.
44. Hitoshi Takagi, Kiyoshi Sakamaki and Kenichi Yoshida :
Fabrication, microstructure and mechanical properties of Ni-NiO in-situ composite,
ECCM-7 Seventh European Conference on Composite Materials, Vol.1, 517-522, London, May 1996.
45. Kyo-Han Kim, Kouichi Esaki, Kenichi Yoshida and Kenzo Asaoka :
Acoustic emission signals during thermal processing of gypsum-bonded investment,
Journal of Dental Research, Vol.75, No.Spec, 63, San Francisco, Mar. 1996.
46. Kenichi Yoshida, Yoshinao Marutani, Ai Zhu, Hitoshi Takagi and Kiyoshi Sakamaki :
Relation between acoustic emission behaviour during deformation and microscopical behaviour of intermetallic compounds,
Proceedings of the 12th Internatinal AE Symposium, Progress in Acoustic Emission VII, 199-204, Sapporo, Oct. 1994.
47. Hitoshi Takagi, Kenichi Yoshida and Kiyoshi Sakamaki :
Acoustic emission behavior during tensile deformation of Ni-NiO in-situ composite,
Proceedings of the 12th Internatinal AE Symposium, Progress in Acoustic Emission VII, 517-521, Sapporo, Oct. 1994.
48. T Tojo, Fumiaki Kawano, Kenichi Yoshida and Kenzo Asaoka :
Temperature dependence of thermal properties of dental glass-ceramics,
Transactions of the 2nd International Congress on Dental Materials, 227, Honolulu, Nov. 1993.
49. Kenichi Yoshida and Kenzo Asaoka :
Acoustic emission behavior during firing of dental porcelain-fused-to-metal strip,
3rd SAMPE International Congress on Advanced Materials, Chiba, 1993.
50. Kenichi Yoshida, Akira Takahashi, Hitoshi Takagi and Kiyoshi Sakamaki :
Evaluation of stress induced martensitic transformation velocity in Cu-Al-Ni shape memory alloy single crystals by acoustic emission,
Proceedings of the 11th Internatinal AE Symposium, Progress in Acoustic Emission VII, 497-503, Fukuoka, Oct. 1992.
51. Kenichi Yoshida, Akira Takahashi, Hitoshi Takagi and Kiyoshi Sakamaki :
Acoustic emission waveforms generated by the phase transformation in Cu-Al-Ni shape memory alloy single crystals and its source,
Proceedings of the 10th Internatinal AE Symposium, Progress in Acoustic Emission V, 83-89, Sendai, Oct. 1990.
52. Kenichi Yoshida, Masafumi Yoshida, Hitoshi Takagi and Kiyoshi Sakamaki :
Source mechanism of acoustic emission generated around the yield point of a Al-Li-Cu-Mg-Zr alloy,
Proceedings of the 9th Internatinal AE Symposium, Progress in Acoustic Emission IV, 514-519, Kobe, Nov. 1988.
53. Kenichi Yoshida, Kiyoshi Sakamaki, Hitoshi Takagi, Kunihiko Ohashi and Masafumi Yoshida :
Characteristics of acoustic emission induced by the thermoelastic phase transformation in Cu-Al-Ni alloy single crystals,
Proceedings of the 9th Internatinal AE Symposium, Progress in Acoustic Emission IV, 583-589, Kobe, Nov. 1988.
54. Junji Takatsubo, Kenichi Yoshida and Hiroshi Yokogawa :
Classification of AE Waveform in Tensile Test of Carbon Steel,
Proceedings of the 8th Internatinal AE Symposium, Vol.8, 692-699, Tokyo, Oct. 1986.
55. Kenichi Yoshida and Junji Takatsubo :
Acoustic Emission Behaviour in Tensile Test of Steels at Elevated Temperature,
Proceedings of the 8th Internatinal AE Symposium, Vol.8, 469-476, Tokyo, Oct. 1986.
56. Kenichi Yoshida, Masaaki Nakano and Ichiro Komura :
AE Signal Analysis during Fatigue Crack Propagation in SUS304 at 600℃,
Proceedings of the 7th Internatinal AE Symposium, Vol.7, 248-254, Zao, Oct. 1984.
57. Kenichi Yoshida and Junji Takatsubo :
Source Wave Analysis Based on Fourier Synthesis,
Proceedings of the 7th Internatinal AE Symposium, Vol.7, 147-154, Zao, Oct. 1984.
58. Kenichi Yoshida, Junji Takatsubo and Murao Mitsui :
Acoustic Emission Characteristics during Fatigue Test of a 60 kg/mm2 Grade Steel,
Proceedings of the 6th Internatinal AE Symposium, Vol.6, 108-114, Susono, Oct. 1982.
59. Kenichi Yoshida and Murao Mitsui :
Evaluation of Welded Joints of SUS304 Austenitic Stainless Steel with AE Method,
Proceedings of the 5th Internatinal AE Symposium, Vol.5, 488-497, Tokyo, Oct. 1980.
60. Kenichi Yoshida and Murao Mitsui :
Acoustic Emission Behavior under Plane Stress Condition,
Proceedings of the 4th Internatinal AE Symposium, Vol.4, 43-60, Tokyo, Sep. 1978.

Proceeding of Domestic Conference:

1. Seam Song, Koji Hayashi, Kenichi Yoshida and Hideo Nishino :
On reflection coefficient in a wide frequency range of the T(0,1) mode guided waves on axisymmetric defects,
第19回超音波による非破壊評価シンポジウム講演論文集, 65-68, Jan. 2012.
2. 斎藤 浩史, 谷口 優太, 林 晃史, Kenichi Yoshida and Hideo Nishino :
T(0,1)modeガイド波の欠陥での反射透過メカニズムとそのモデル計算の精度についての考察,
第19回超音波による非破壊評価シンポジウム講演論文集, 69-70, Jan. 2012.
3. 片岡 知弥, 森田 圭一, Kenichi Yoshida and Hideo Nishino :
ガイド波用リング形センサーで励起した円周Lamb波の共鳴を利用した肉厚測定法,
日本非破壊検査協会春季講演大会講演論文集, 103-104, Oct. 2011.
4. 田邊 祥宏, Kenichi Yoshida, Hideo Nishino and 問山 清和 :
圧電式リングセンサーによる高次ねじりモードガイド波の励起と不要な周方向ガイド波の励起について,
日本機械学会2011年度年次大会講演論文集, J042014, Sep. 2011.
5. 林 晃司, Kenichi Yoshida and Hideo Nishino :
複数の周波数のガイド波を用いた減肉形状の推定,
日本機械学会2011年度年次大会講演論文集, J042024, Sep. 2011.
6. 谷口 優太, Kenichi Yoshida, Hideo Nishino, 高橋 雅和, 小倉 幸夫 and 小川 仁 :
集束形空気超音波センサーによる円周Lamb波の効率的励起メカニズムと減肉計測への応用,
日本機械学会2011年度年次大会講演論文集, J042012-198, Sep. 2011.
7. 溝渕 裕貴, Kenichi Yoshida, Hideo Nishino, 古川 敬 and 古村 一朗 :
ガイド波によるエルボ配管での欠陥検出感度に関する検討,
日本機械学会2011年度年次大会講演論文集, J042021, Sep. 2011.
8. 林 晃司, Kenichi Yoshida and Hideo Nishino :
多周波T(0,1)モードガイド波を用いた配管の減肉形状推定,
日本非破壊検査協会春季講演大会講演論文集, 7-8, Mar. 2011.
9. Hirofumi Saito, Kazuhiro Mandai, Hideo Nishino, Kenichi Yoshida, Eiji Maitani and Toshio Matsubara :
溶接現象リアルタイム可視化技術,
第16回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.16, 17-18, Mar. 2011.
10. Gen Takai, Hideo Nishino and Kenichi Yoshida :
ガス管に導入した円周方向スリット形状人工欠陥と漏洩によるAE,
第16回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.16, 7-8, Mar. 2011.
11. Takuya Sumida, Takeshi Yasuda, Hideo Nishino and Kenichi Yoshida :
模擬AE波を考慮したCu-Al-Ni形状記憶合金におけるマルテンサイト変態の動的挙動解明,
第16回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.16, 5-6, Mar. 2011.
12. Takeshi Sajita, Yusuke Kuniyasu, Hideo Nishino and Kenichi Yoshida :
Al-Mg-Si合金の引張特性に及ぼす冷却速度の影響とAE挙動,
第16回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.16, 3-4, Mar. 2011.
13. Kouji Kodama, Kenzo Asaoka, Hideo Nishino and Kenichi Yoshida :
リン酸塩系埋没材の密度と気孔率に関する研究,
第16回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.16, 1-2, Mar. 2011.
14. Koji Hayashi, Yasuhiro Tanaka, Kenichi Yoshida and Hideo Nishino :
On reflection coefficient of the T(0,1) mode guided wave at a defect,
第18回超音波による非破壊評価シンポジウム講演論文集, 31-32, Jan. 2011.
15. Yuta Taniguchi, Tadashi Asano, Kenichi Yoshida, Hideo Nishino, Masakazu Takahashi, Yukio Ogura and Hitoshi Ogawa :
Efficient generation of circumferential Lamb wave using the line focus type noncontact air-coupled transducers and its application for measurements of pipe wall thinnings,
第18回超音波による非破壊評価シンポジウム講演論文集, 29-30, Jan. 2011.
16. Hideo Nishino, Yuta Taniguchi, Tadashi Asano, Kenichi Yoshida, Masakazu Takahashi, Yukio Ogura and Hitoshi Ogawa :
Accurate measurement of pipe wall thickness in noncontact manner by a circumferential Lamb wave generated and detected by a pair of air-coupled transducers,
第30回超音波エレクトロニクスシンポジウム講演論文集, 455-456, Nov. 2010.
17. Yuki Mizobuchi, Shuichi Masuda, Kenichi Yoshida and Hideo Nishino :
Defect detection of welded elbow pipes using T(0,1) mode guided waves,
日本非破壊検査協会平成22年度秋季講演大会講演概要集, 11-12, Oct. 2010.
18. Saori Katashima, Kenichi Yoshida and Hideo Nishino :
Mode conversions of the T(0,1) mode guided wave propagating through an tee's pipe,
日本非破壊検査協会平成22年度秋季講演大会講演概要集, 9-10, Oct. 2010.
19. Saori Katashima, Kenichi Yoshida and Hideo Nishino :
Mode conversions of the T(0,1) mode guided wave propagating through an tee's pipe,
日本機械学会平成22年度年次大会講演論文集, Vol.6, 413-414, Sep. 2010.
20. Yuki Mizobuchi, Shuichi Masuda, Kenichi Yoshida and Hideo Nishino :
Defect detection of welded elbow pipes using T(0,1) mode guided waves,
日本機械学会平成22年度年次大会講演論文集, Vol.6, 415-416, Sep. 2010.
21. Toshiro Tanaka, Kenichi Yoshida, Hideo Nishino and Junji Takatsubo :
Simultaneous measurement of phase and group velocities of Lamb wave using generation laser scanning method,
日本機械学会平成22年度年次大会講演論文集, Vol.6, 399-400, Sep. 2010.
22. Tadashi Asano, Kenichi Yoshida, Hideo Nishino, Hitoshi Ogawa, Masakazu Takahashi and Yukio Ogura :
Noncontact measurement of wall thinning of a hollow cylinder using circumferential Lamb waves generated and detected by a pair of air-coupled ultrasonic transducers,
日本機械学会平成22年度年次大会講演論文集, Vol.6, 405-406, Sep. 2010.
23. Tadashi Asano, Kenichi Yoshida, Hideo Nishino, Hitoshi Ogawa, Masakazu Takahashi and Yukio Ogura :
Precise wall thinning evaluations of cylinders using circumferential Lamb waves generated by noncontact air-coupled ultrasonic transducers,
平成22年度春季講演大会講演概要集, 163-164, May 2010.
24. Yuichi Tokuyama, Yusuke Kuniyasu, Hideo Nishino and Kenichi Yoshida :
Al-Mg-Si合金の変形中のAE挙動に関する研究,
第15回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.15, 23-24, Mar. 2010.
25. Kosuke Fujita, Takeshi Yasuda, Hideo Nishino and Kenichi Yoshida :
AE計測装置の応答関数の導出に関する研究,
第15回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.15, 21-22, Mar. 2010.
26. Kouhei Tsukada, Hirokazu Kanda, Hideo Nishino, Kenzo Asaoka and Kenichi Yoshida :
歯科用埋没材の硬化反応,加熱膨張と気孔生成に関する研究,
第15回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.15, 15-16, Mar. 2010.
27. Masanori Watanabe, Kazuhiro Mandai, Hideo Nishino, Kenichi Yoshida and Toshio Matsubara :
溶接現象リアルタイム可視化技術に関する研究,
第15回四国地区材料関連学協会支部・研究会連合講演会講演概要集, Vol.15, 7-8, Mar. 2010.
28. Toyokazu Komatsu, Yasuhiro Tanaka, Kenichi Yoshida and Hideo Nishino :
Evaluation of sensitivity for axially increasing defects by the guided wave inspections,
第17回超音波による非破壊評価シンポジウム講演論文集, 41-42, Jan. 2010.
29. Toshiro Tanaka, Shuichi Masuda, Kenichi Yoshida and Hideo Nishino :
Higher order mode conversions of the T(0,1) mode guided wave propagating along an elbow pipe,
第17回超音波による非破壊評価シンポジウム講演論文集, 43-44, Jan. 2010.
30. Keiji Ogura, Akira Sato, Kenichi Yoshida and Hideo Nishino :
Consideration of defect detection using Multireflecting Guided wave Energy Trapping (MGET) method,
日本機械学会平成21年度年次大会講演論文集, Vol.6, 457-458, Sep. 2009.
31. Shuichi Masuda, Toshiro Tanaka, Kenichi Yoshida and Hideo Nishino :
Defect detections in elbow pipes using guided waves and their propagation phenomena,
日本機械学会平成21年度年次大会講演論文集, Vol.6, 455-456, Sep. 2009.
32. Yasuhiro Tanaka, Toyokazu Komatsu, Kenichi Yoshida and Hideo Nishino :
Evaluation of guided wave sensitivity for obliquely stretching defects to the axial direction of pipes,
日本機械学会平成21年度年次大会講演論文集, Vol.6, 449-450, Sep. 2009.
33. Toshiro Tanaka, Shuichi Masuda, Kenichi Yoshida and Hideo Nishino :
Mode conversion of the T(0,1) mode guided wave propagating through an elbow pipe,
日本機械学会平成21年度年次大会講演論文集, Vol.6, 453-454, Sep. 2009.
34. Toyokazu Komatsu, Yasuhiro Tanaka, Kenichi Yoshida and Hideo Nishino :
Sensitivity of guided wave for gradually increasing defects to the axial direction of pipes,
日本機械学会平成21年度年次大会講演論文集, Vol.6, 451-452, Sep. 2009.
35. Takeshi Yauda, Hideo Nishino, Kenichi Yoshida, Baojun Pang and Nozomi Ito :
Cu-Al-Ni形状記憶合金における超弾性マルテンサイト変態とその応答規模,
第17回アコースティック·エミッション総合コンファレンス論文集, Vol.17, 25-28, Aug. 2009.
36. Shuichi Masuda, Hironori Kondo, Kenichi Yoshida and Hideo Nishino :
A fundamental examination of mechanism of high efficient transduction of a guided wave using a reflector, --- An evaluation of reflection and transmission coefficients of a guided wave at the magnetostrictive sensor and the reflector ---,
第16回超音波による非破壊評価シンポジウム講演論文集, 103-104, Jan. 2009.
37. Keiji Ogura, Kenichi Yoshida and Hideo Nishino :
Verification of defect detection for a guided wave excited by the efficient generation method using the refelctor,
第16回超音波による非破壊評価シンポジウム講演論文集, 47-48, Jan. 2009.
38. Yasuhiro Tanaka, Hironori Kondo, Kenichi Yoshida and Hideo Nishino :
Efficient generation of a guided wave using two sensors and a refelctor,
第16回超音波による非破壊評価シンポジウム講演論文集, 105-106, Jan. 2009.
39. Hideo Nishino, Keiji Ogura and Kenichi Yoshida :
Efficient nondestrcutive evaluation of pipes by Multireflecting Guided wave Energy Trapping (MGET) method,
第30回超音波エレクトロニクスシンポジウム講演論文集, 2009.
40. Hideo Nishino, Keiji Ogura and Kenichi Yoshida :
Defect detections of pipes using guided waves generated by an efficient transduction method with a reflector,
第29回超音波エレクトロニクスシンポジウム講演論文集, 293-294, Nov. 2008.
41. Hironori Kondo, Kenichi Yoshida and Hideo Nishino :
Reflection and transmission phenomena of a guided wave at the magnetostrictive sensor and the refelctor,
日本機械学会平成20年度年次大会, 335-336, Aug. 2008.
42. Yasuhiro Tanaka, Hironori Kondo, Kenichi Yoshida and Hideo Nishino :
Efficient generation of a guided wave using the two magnetostritive sensors and the reflector,
日本機械学会平成20年度年次大会, 339-340, Aug. 2008.
43. Keiji Ogura, Hironori Kondo, Kenichi Yoshida and Hideo Nishino :
Evaluation of defect detection for a guided wave excited by the efficient generation method using the reflector,
日本機械学会平成20年度年次大会, 337-338, Aug. 2008.
44. Kondo Hironori, Keiji Ogura, Yasuhiro Tanaka, Kenichi Yoshida and Hideo Nishino :
Fundamental consideration of a guided wave with reflector, --- Reflection and transmission of a guided wave at the magnetostrictive sensor and the reflctor ---,
日本非破壊検査協会平成20年度春季講演大会, 155-156, May 2008.
45. Laodeno Nunez Rem, Akira Takane, Hideo Nishino and Kenichi Yoshida :
Characterization of AE signals generated by gas leak on pipe with artificial defect at different wall thickness,
日本非破壊検査協会平成20年度春季講演大会, 77-80, May 2008.
46. Hideo Nishino, Yokoyama Ryuichi and Kenichi Yoshida :
Wide band generation of circumferential guided waves in a pipe,
第15回機械材料・材料加工技術講演会M&P2007, 417-418, Nov. 2007.
47. Hideo Nishino, Yokoyama Ryuichi and Kenichi Yoshida :
Tone burst generations of circumferential guided waves propagating in a pipe and their time-frequency analyses,
超音波エレクトロニクスの基礎と応用に関するシンポジウム, 417-418, Nov. 2007.
48. Takeshi Yauda, Hideo Nishino and Kenichi Yoshida :
横波センサーを発生源とした薄板金属片に生ずるAEの波形解析とその特性,
第16回アコースティック·エミッション総合コンファレンス論文集, Vol.16, 121-124, Sep. 2007.
49. Masaki Numaue, Kenichi Yoshida, Hideo Nishino and Naoki Hamada :
Al-Mg-Si合金の変形中のAE挙動に関する研究,
第16回アコースティック·エミッション総合コンファレンス論文集, Vol.16, 93-96, Sep. 2007.
50. Kondo Hironori, Kato Yasuhisa, Kenichi Yoshida and Hideo Nishino :
Efficient generation of a aguided wave using a Magneto-strictive sensor and reflector with actual sensor setting,
日本機械学会2007年度年次大会, Sep. 2007.
51. Hideo Nishino, Kondo Hironori and Kenichi Yoshida :
An efficient transduction method of a guided wave in a pipe,
日本保全学会第4回学術講演会, Jul. 2007.
52. Kato Yasuhisa, Kondo Hironori, Kenichi Yoshida and Hideo Nishino :
An effective generation and detection method of a guided wave in a pipe using areflector,
中国四国支部第45期総会講演会講演論文集, 111-112, Mar. 2007.
53. Yokoyama Ryuuichi, Kenichi Yoshida and Hideo Nishino :
Excitation and time-frequecny analysis of circumferential guided waves,
中国四国支部第45期総会講演会講演論文集, 119-120, Mar. 2007.
54. Kondo Hironori, Kato Yasuhisa, Kenichi Yoshida and Hideo Nishino :
A study about effective transmission and reception of guided wave with a MsS sensor,
中国四国支部第45期総会講演会講演論文集, 111-112, Mar. 2007.
55. Yokoyama Ryuuichi, Kenichi Yoshida and Hideo Nishino :
Tone-burst generations of circumferential guided waves and their time-frequency analyses,
超音波による非破壊評価シンポジウム講演論文集, Jan. 2007.
56. Kondo Hironori, Kenichi Yoshida and Hideo Nishino :
An effective generation method of a guided wave in a pipe using a reflector,
超音波による非破壊評価シンポジウム講演論文集, Jan. 2007.
57. Kato Yasuhisa, Kenichi Yoshida and Hideo Nishino :
An effective generation method of a guided wave in a pipe using a reflector,
秋季大会講演論文集, 163-164, Oct. 2006.
58. Hideo Nishino, Yokoyama Ryuichi and Kenichi Yoshida :
Generations of circumferential guided waves propagating in a pipe using a bulk shear wave sensor,
超音波エレクトロニクスの基礎と応用に関するシンポジウム, 417-418, Oct. 2006.
59. Hideo Nishino and Kenichi Yoshida :
Selective generation of circumferential guided waves in a pipe,
日本機械学会年次大会講演論文集, Vol.1, 303-304, Sep. 2006.
60. Kato Yasuhisa, Hamada Hikaru, Kenichi Yoshida and Hideo Nishino :
study on an effective generation of guided waves in a pipe,
日本機械学会年次大会講演論文集, Vol.1, 305-306, Sep. 2006.
61. Yuji Hayashi, Kenichi Yoshida and Kenzo Asaoka :
チタン粉末の比表面積とアパタイト修飾特性に関する研究,
Journal of Japanese Society for Dental Products, Vol.20, No.1, 57, Jul. 2006.
62. Yuki Sakamoto, Hidetaka Sezaki, Kenichi Yoshida and Kenzo Asaoka :
チタンの熱処理,腐食と機械的性質に関する研究,
Journal of Japanese Society for Dental Products, Vol.20, No.1, 56, Jul. 2006.
63. Hideo Nishino, 木村 元貴 and Kenichi Yoshida :
Characteristics of circumferential guided waves propagating in a pipe,
超音波による非破壊評価シンポジウム講演論文集, Jan. 2006.
64. Kenichi Yoshida, Hideo Nishino and Tetsuro Kawano :
ガスリーク中に検出されたAE特性におよぼすスリット状人工孔の形状およびその方向の影響,
第15回アコースティック·エミッション総合コンファレンス論文集, Vol.15, 55-58, Dec. 2005.
65. Daiki Tani, Kenichi Yoshida, Hideo Nishino and Takeshi Yauda :
AE法によるCu-Al-Ni形状記憶合金の変形中に発生する異なったマルテンサイトの動的挙動,
第15回アコースティック·エミッション総合コンファレンス論文集, Vol.15, 51-54, Dec. 2005.
66. 石原 新平, Kenichi Yoshida and Hideo Nishino :
液体中を伝搬するガイド波を用いた探傷に関する基礎的検討,
平成17年度 日本非破壊検査協会秋季大会, Nov. 2005.
67. 石原 新平, Kenichi Yoshida and Hideo Nishino :
液中ガイド波による探傷 ーー2次元空間での実験·シミュレーションによる検証ーー,
2005年度 日本機械学会年次大会, Sep. 2005.
68. Hideo Nishino, Kenichi Yoshida, 長 秀雄 and 竹本 幹男 :
パイプエルボ部におけるガイド波のモード変換,
2005年度 日本機械学会年次大会, Sep. 2005.
69. Hideo Nishino and Kenichi Yoshida :
パイプの円周方向に伝搬するSH波の特徴,
平成17年度 日本非破壊検査協会春季大会, May 2005.
70. Yuki Sakamoto, Kenzo Asaoka and Kenichi Yoshida :
Chemical surface modification of porous titanium compacts and its strength,
The Journal of the Japanese Society for Dental Materials and Devices, Vol.24, No.2, 91, Apr. 2005.
71. Hidetaka Sezaki, Kenzo Asaoka and Kenichi Yoshida :
Corrosion of titanium in acidulated phosphate fluoride solution and protection by annealing,
The Journal of the Japanese Society for Dental Materials and Devices, Vol.24, No.2, 88, Apr. 2005.
72. Yuki Sakamoto, Kenichi Yoshida, Kenzo Asaoka and Toshio Matsubara :
Strength and chemical apatite coating on porous titanium compacts by spark plasma sintering,
日本機械学会講演論文集, No.055-1, 73-74, Mar. 2005.
73. Hidetaka Sezaki, Kenichi Yoshida and Kenzo Asaoka :
Effect of acidulated phosphate fluoride solution on mechanical properties of annealed titanium,
日本機械学会講演論文集, No.055-1, 71-72, Mar. 2005.
74. 加藤 泰久, Kenichi Yoshida, Hideo Nishino, 池田 隆, 金原 了二, 藤原 光明, 松岡 勲 and 宮澤 正純 :
防油堤のパイプ貫通部を伝搬するL-·F-モードガイド波の特性,
第12回 超音波による非破壊評価シンポジウム, Jan. 2005.
75. Tetsuro Kawano, Kenichi Yoshida and Keitaro Horikawa :
AE法を用いたガス漏洩音の周波数特性,
第14回アコースティック·エミッション総合コンファレンス論文集, Vol.14, 113-116, Nov. 2003.
76. Kotaro Hanabusa, Kenichi Yoshida and Keitaro Horikawa :
Cu-Al-Ni形状記憶合金のマルテンサイト変態初期におけるAE挙動,
第14回アコースティック·エミッション総合コンファレンス論文集, Vol.14, 17-20, Nov. 2003.
77. Yoshiaki Akematsu, Kenichi Yoshida, Kiyoshi Sakamaki, Keitaro Horikawa and Mitsuhiro Nishikawa :
ガス漏洩に伴うAE特性,
第13回アコースティック·エミッション総合コンファレンス論文集, Vol.13, 111-114, Oct. 2001.
78. Masahiro Yamamoto, Kenichi Yoshida, Kiyoshi Sakamaki, Keitaro Horikawa and Ryohei Yamashita :
NiAl金属間化合物の変形中のAE挙動におよぼすボロン添加の影響,
第13回アコースティック·エミッション総合コンファレンス論文集, Vol.13, 59-62, Oct. 2001.
79. Yoshiaki Akematsu, Kenichi Yoshida, Keitaro Horikawa and Kiyoshi Sakamaki :
AE法によるガス漏洩検知,
第12回アコースティック·エミッション総合コンファレンス論文集, Vol.12, 279-284, Nov. 1999.
80. Ryohei Yamashita, Kenichi Yoshida, Keitaro Horikawa and Kiyoshi Sakamaki :
一方向凝固NiAl金属間化合物の変形中のAE挙動,
第12回アコースティック·エミッション総合コンファレンス論文集, Vol.12, 119-124, Nov. 1999.
81. Kenichi Yoshida, Yuqin Wang, Keitaro Horikawa, Kiyoshi Sakamaki and Kenji Kajiyama :
AE法によるGeおよびSi単結晶における水素脆化割れの検出,
第12回アコースティック·エミッション総合コンファレンス論文集, Vol.12, 107-112, Nov. 1999.
82. Masatomo Kunisawa, Kenichi Yoshida, Keitaro Horikawa and Kiyoshi Sakamaki :
アコースティック·エミッションによるTiN皮膜の評価,
第12回アコースティック·エミッション総合コンファレンス論文集, Vol.12, 29-34, Nov. 1999.
83. Yasutomo Iwata, Kenichi Yoshida, Kiyoshi Sakamaki and Hitoshi Takagi :
Ni3Al金属間化合物の引張変形中のAE挙動,
第11回アコースティック·エミッション総合コンファレンス論文集, Vol.11, 45-50, Nov. 1997.
84. Shinichi Kihara, Kenichi Yoshida, Kiyoshi Sakamaki and Hitoshi Takagi :
Cu-Al-Ni形状記憶合金単結晶のマルテンサイト変態中のAE挙動,
第11回アコースティック·エミッション総合コンファレンス論文集, Vol.11, 39-44, Nov. 1997.
85. Masahiro Naito, Masahiko Kato, Kenichi Yoshida, Kiyoshi Sakamaki and Hitoshi Takagi :
層状組織中を伝播するAE波の特性,
第11回アコースティック·エミッション総合コンファレンス論文集, Vol.11, 27-32, Nov. 1997.

Patent:

1. 横川 洪, 高坪 純治 and Kenichi Yoshida : AEセンサを用いた材料の亀裂長さ検出法, 61-69374, 62-225952, 6-8805 (Feb. 1994).

Grants-in-Aid for Scientific Research (KAKEN Grants Database @ NII.ac.jp)

  • New Approach of Acoustic Emission Method to Energy Saving Analysis of Gas Jet Flow (Project/Area Number: 19560732 )
  • Fundamental research of propagation phenomena of ultrasonic guided waves at complex piping structures (Project/Area Number: 18560697 )
  • Development of Consistent Measuring Procedure to Detect Hydrogen Damage by Acoustic Emission Method (Project/Area Number: 16560635 )
  • AE法による相変態ダイナミックスの解明 (Project/Area Number: 10136235 )
  • Fundamental Study on Quantitative Evaluation of Acoustic Emisson Signals (Project/Area Number: 09650792 )
  • 先進材料の開発,特性評価およびその応用 (Project/Area Number: 02045025 )
  • Search by Researcher Number (50200986)