Tokushima University / Educator and Researcher Directory --- Katoh, Masahiro

Personal Web Page

https://www.chem.tokushima-u.ac.jp/C4/

https://researchmap.jp/read0184045 (researchmap)

Field of Study

○	Chemical Engineering, Separation Engineering

Subject of Study

○	Development of hydrogen production process with Pd membrane, Preparation of porous materials and evaluation of the gas adsorption characteristics, Evaluation of the adsorption characteristics by IR spectroscopy (Pd membrane, hydrogen production process, adsorption, zeolite, infrared spectroscopy)

Book / Paper

Book:

1.	Shigeru Sugiyama, Toshihiro Moriga, Masahiro Katoh, Kei-ichiro Murai, Toshihide Horikawa, Naohiro Shimoda, Akihiro Furube, Shin-ichiro Yanagiya, Masamichi Ogasawara, Takashi Yamamoto, Yoshitoshi Nakamura, Chikako Asada, Chizuru Sasaki, Hideji TANAKA, Masaki Takeuchi, Yutaka Taketani, Hisami Okumura, Masashi Masuda and Toshihiro Okamoto : 枯渇資源と技術開発, 徳島大学産業院出版部, Tokushima, Mar. 2020. (Summary) 2017年度から徳島大学重点クラスター``人類の恒久的繁栄に向けた対枯渇資源対応技術の開発''として活動した成果を，一般の読者にもわかりやすいように公表した徳島大学産業院出版部から始めて出版した書籍である．
2.	Masahiro Katoh : 第一章吸着現象の応用事例 2 産業における応用事例 r) 光触媒, リアライズ理工センター, Tokyo, Jun. 2009.
3.	Masahiro Katoh : 第三編国際会議の記録, 1. 国内開催国際会議から, [4] 5th International Symposium on Surface and Nanotechnology (ISSS-5), Catalysis Society of Japan, Tokyo, Apr. 2009.
4.	Masahiro Katoh and Tahei Tomida : Adsorption of Gases on Ion-exchanged Zeolite Surfaces, --- Encyclopedia of Surface and Colloid Science (Arthur T. Hubbard, ed.) ---, Marcel Dekker.Inc, New York, Jan. 2002. (Summary) 本稿では，ナノ細孔内に純気体(無極性気体と極性気体)および2成分気体をプローブ分子として導入し，カチオンとの相互作用に注目しながら，赤外分光法を用いてナノ多孔体の吸着特性を検討した研究例に筆者らの結果をあわせて紹介した．
5.	Masahiro Katoh and Tahei Tomida : 水溶性キレートポリマーと中空糸による金属イオンの分離回収法, 化学工業社, 東京 (日本), Jul. 1997. (Summary) 液-液系での分離技術を総覧したものであり，その中で，金属イオンを濃縮·回収する方法として，水溶性キレートポリマーと限外濾過膜を組み合わせた新規な分離プロセスについて述べ，膜透過速度や濃縮機構について記述している．

Academic Paper (Judged Full Paper):

1.	Takafumi Hanada, Schaeffer Nicolas, Masahiro Katoh, Coutinho A. P. Joao and Goto Masahiro : Improved separation of rare earth elements using hydrophobic deep eutectic solvents: liquidliquid extraction to selective dissolution, Green Chemistry, Vol.26, No.18, 9671-9675, 2024.
2.	Shigeru Sugiyama, Kenta Oribe, Shino Endo, Tashu Yoshida, Naohiro Shimoda, Masahiro Katoh, Yuki Kato and Wataru Ninomiya : Enhancement of the Catalytic Activity Associated with Carbon Deposition Formed on NiO/γ-Al2O3 Catalysts during the Direct Dehydrogenation of Isobutane, Journal of Chemical Engineering of Japan, Vol.54, No.1, 35-43, 2021. (Summary) The dehydrogenation of isobutane in the presence of CO2 over NiO supported on γ-Al2O3 was examined. For comparison, Cr2O3 supported on γ-Al2O3 was also used. It is generally accepted that a catalyst used for the dehydrogenation of various alkanes will suffer catalyst deactivation due to the formation of carbon deposits. In the present study, the yield of isobutene was significantly decreased with time-on-stream due to carbon deposition when using Cr2O3(x)/γ-Al2O3, in which x indicates the loading of a corresponding oxide by weight %. However, carbon deposits also were evident on NiO(x)/γ-Al2O3, but the yield of isobutene was enhanced with time-on-stream depending on the loading (x). This indicates that the contribution of the carbon deposition in the dehydrogenation on NiO(x)/γ-Al2O3 definitely differed from that on an ordinary catalyst system such as Cr2O3(x)/γ-Al2O3. In order to confirm the advantageous effect that carbon deposition exerted on the yield of isobutene, NiO(x)/γ-Al2O3 was first treated with isobutane and then the catalytic activity was examined. As expected, it became clear that the carbon deposits formed during the pretreatment contributed to the enhancement of the yield of isobutene. The presence of a Ni-carbide species together with the metallic Ni that was converted from NiO during dehydrogenation definitely enhanced of the yield of isobutene. Although carbon deposition is generally recognized as the main cause of catalyst deactivation, the results of the present study reveal that carbon deposition is not necessarily the cause of this phenomenon. (Tokushima University Institutional Repository) ● Metadata: 115597 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.20we198 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.20we198 (Tokushima University Institutional Repository: 115597, DOI: 10.1252/jcej.20we198)
3.	Shigeru Sugiyama, En-Hong Liu, Kenta Imanishi, Naohiro Shimoda, Masahiro Katoh and Jhy-Chern Liu : Dependence of Phosphorus Recovery on Acid Type during Dissolution-Precipitation Treatment of Incineration Ash of Chicken Manure, Journal of Chemical Engineering of Japan, Vol.53, No.10, 667-674, 2020. (Summary) In order to utilize chicken manure as a source of phosphorus, we used dissolution-precipitation treatment to recover phosphorus from the incineration ash of chicken manure (IACM), which was used as fuel to power a boiler. In order to recover useful phosphorus-containing solids from IACM, it was dissolved into aqueous solutions of either nitric acid, hydrochloric acid, or sulfuric acid to elute phosphorus together with various component elements, followed by the use of aqueous NH3 to form a precipitate containing phosphorus. In using nitric acid and hydrochloric acid, calcium phosphate species such as calcium hydroxyapatite (Ca10(PO4)6(OH)2) and monetite (CaHPO4) were obtained following the precipitation treatment. By contrast, the use of sulfuric acid resulted in the precipitation of magnesium ammonium phosphate (MAP) species such as struvite (MgNH4PO4∙6H2O) and dittmarite (MgNH4PO4∙H2O). Both the calcium phosphate and MAP species can be used as a slow-acting fertilizer containing phosphorus, while the MAP species could be simultaneously used as a slow-acting fertilizer containing nitrogen. It is noteworthy that the calcium phosphate species obtained in the present study was equivalent to phosphate rock, which is widely used as a raw material in phosphorous-based industries, and the natural sources of this material could be depleted in the near future. Though IACM has not been used effectively until now, this new resource shows promise as s viable alternative to the dwindling supply of the natural sources of phosphorus. (Keyword) Incineration Ash / Chicken Manure / Recovery of Phosphorus / Hydroxyapatite / Struvite (Tokushima University Institutional Repository) ● Metadata: 115388 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.20we089 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.20we089 (Tokushima University Institutional Repository: 115388, DOI: 10.1252/jcej.20we089)
4.	Shigeru Sugiyama, Mika Miyake, Mizuho Yoshida, Yuki Nakao, Naohiro Shimoda and Masahiro Katoh : Effect of Cerium Addition to Bismuth-molybdenum Complex Oxide Catalyst for Partial Oxidation of Propylene to Acrolein, Journal of the Japan Petroleum Institute, Vol.63, No.5, 267-272, 2020. (Summary) Ce addition to a Bi-Mo complex oxide catalyst supported on SiO2 was examined for its effect on the partial oxidation of propylene to acrolein. The catalyst consisted of an oxygen-supply phase where the lattice oxygen in Mo-oxide was doped with transition metals such as Fe, Ni and Co and was supported by SiO2 and a catalytic-active phase that involved hydrogen-abstraction from a reactant in the Bi-center of Bi-Mo oxide, which was supported by an oxygen-supply phase. In the present study, Ce was added during the oxygen-supply phase in order to enhance its redox nature. An advanta-geous effect of Ce addition was observed particularly under oxygen-rich conditions in the feed stream. For example, at P(C3H8) = 10.1 kPa and P(O2) = 15.5 kPa at 623 K, the yield of acrolein was slightly enhanced from 57.6% with 0% Ce doping to the catalyst to 65.3% with 20% Ce doping to the catalyst at 6 h on-stream. However, under greater oxy-gen-rich conditions at P(C3H8) = 10.1 kPa and P(O2) = 31.0 kPa at 623 K, the yield of acrolein was enhanced approxi-mately twice from 27.7% with 0% Ce doping of the catalyst to 61.8% with 20% Ce doping of the catalyst at 6 h on-stream. Analysis using XPS for the catalysts previously used for the reaction in the absence of gaseous oxygen con-firmed the unique redox behavior between the catalytic-active phase and the oxygen-supply phase as the lattice oxygen in the catalytic-active phase was replenished from the oxygen-supply phase to maintain its surface properties over the catalytic-active phase. The XPS results and the remarkable effect of Ce addition to the oxygen-supply phase under ox-ygen-rich conditions confirmed the correctness of the concept of the catalyst preparation consisting of an oxy-gen-supply phase and a catalytic-active phase was correct. (Keyword) Partial oxidation / Propylene / Acrolein / Bismuth-Molybdenum oxide / Cerium doping (Tokushima University Institutional Repository) ● Metadata: 115165 (Link to Publication Site) ● Publication site (DOI): 10.1627/jpi.63.267 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1627/jpi.63.267 (Tokushima University Institutional Repository: 115165, DOI: 10.1627/jpi.63.267)
5.	Shigeru Sugiyama, Yasunori Hayashi, Ikumi Okitsu, Naohiro Shimoda, Masahiro Katoh, Akihiro Furube, Yuki Kato and Wataru Ninomiya : Oxidative Dehydrogenation of Methane When Using TiO2- or WO3-Doped Sm2O3 in the Presence of Active Oxygen Excited with UV-LED, --- Special Issue: Photocatalytic Oxidation/Ozonation Processes ---, Catalysts, Vol.10, 559-567, 2020. (Summary) There are active oxygen species that contribute to oxidative coupling or the partial oxidation during the oxidative dehydrogenation of methane when using solid oxide catalysts, and those species have not been definitively identified. In the present study, we clarify which of the active oxygen species affect the oxidative dehydrogenation of methane by employing photo-catalysts such as TiO2 or WO3, which generate active oxygen from UV-LED irradiation conditions under an oxygen flow. These photo-catalysts were studied in combination with Sm2O3, which is a methane oxidation coupling catalyst. For this purpose, we constructed a reaction system that could directly irradiate UV-LED to a solid catalyst via a normal fixed-bed continuous-flow reactor operated at atmospheric pressure. Binary catalysts prepared from TiO2 or WO3 were either supported on or kneaded with Sm2O3 in the present study. UV-LED irradiation clearly improved the partial oxidation from methane to CO and/or slightly improved the oxidative coupling route from me-thane to ethylene when binary catalysts consisting of Sm2O3 and TiO2 are used, while negligible UV-LED effects were detected when using Sm2O3 and WO3. These results indicate that with UV-LED irradiation the active oxygen of O2 from TiO2 certainly contributes to the activation of methane during the oxidative dehydrogenation of methane when using Sm2O3, while the active oxygen of H2O2 from WO3 under the same conditions afforded only negligible effects on the activation of methane. (Tokushima University Institutional Repository) ● Metadata: 114823 (Link to Publication Site) ● Publication site (DOI): 10.3390/catal10050559 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.3390/catal10050559 (Tokushima University Institutional Repository: 114823, DOI: 10.3390/catal10050559)
6.	Masahiro Katoh, Tomoe Ueshima, Masahiro Takatani, Hikaru Sugiura, Kota Ominami and Shigeru Sugiyama : Effects of different silica intermediate layers for hydrogen diffusion enhancement of palladium membranes applied to porous stainless steel support, Scientific Reports, Vol.10, No.1, 5148, 2020. (Summary) Porous stainless steel (SUS) supports were modified with double intermediate layers, silicalite-1 and -alumina, to enhance the hydrogen diffusion of a thin palladium membrane. One of layers, silicalite-1, was prepared using the hydrothermal synthetic method on porous SUS supports. The differences in expansion/contraction behaviors caused by different thermal coefficients of expansion between silicalite-1 and the SUS resulted in a lowering of the durability of the membrane. Intermediates layers of mesoporous MCM-48 powders or commercial spherical non-porous silica particles were then applied to porous SUS supports via aspiration, -alumina was introduced by dip-coating, and the Pd membrane was subjected to electro-less plating. H2 permeance of the Pd membrane (membrane thickness: 11 m) containing spherical silica particles was around 10x10-6 molm-2s-1Pa-1 at 600°C, which was higher than that of the Pd membrane (membrane thickness: 7 m) containing MCM-48. The durability of the Pd membrane containing spherical silica particles was higher than that of the version containing MCM-48 powders. These results suggest that commercial spherical non-porous silica particles will uniformly occupy the pores of the SUS tubes and enhance the H2 permeance and durability of the Pd membrane. (Keyword) palladium membrane / silica / intermediate layer / hydrogen diffusion enhancement (Tokushima University Institutional Repository) ● Metadata: 114936 (Link to Publication Site) ● Publication site (DOI): 10.1038/s41598-020-62054-3 (Link to Search Site for Scientific Articles) ● PubMed @ National Institutes of Health, US National Library of Medicine (PMID): 32198416 ● Search Scopus @ Elsevier (PMID): 32198416 ● Search Scopus @ Elsevier (DOI): 10.1038/s41598-020-62054-3 (Tokushima University Institutional Repository: 114936, DOI: 10.1038/s41598-020-62054-3, PubMed: 32198416)
7.	Masahiro Katoh, Kota Horiuchi, Ayaka Satoh, Kota Aoyagi and Shigeru Sugiyama : Alkali Treatment of Commercial Silicoaluminophosphate Molecular Sieves (SAPO-34) Enhances the Water Adsorption and Desorption Properties, Journal of Encapsulation and Adsorption Sciences, Vol.9, 149-158, 2019. (Summary) Commercial silicoaluminophosphate molecular sieves (SAPO-34) received alkali treatment with either NaOH (0.2, 0.01, 0.005, or 0.001 M) or NH4OH (0.005 M). Treatment with NaOH (0.005 M) increased the water adsorption initial rate of SAPO-34 by 1.4-fold. The alkali treatment introduced Na+ adsorption sites into the SAPO-34. The desorption ratio (adsorption at 30 and desorption at 100) was 88.2% higher than the original rate (84.3%). On the other hand, after alkali treatment of SAPO-34 using NH4OH (0.005 M), calcination resulted in the highest desorption ratio at 91.3%. When combined with calcination, alkali treatment with NH4OH introduced H+ adsorption sites into SAPO-34, H+ adsorption sites feature low levels of interaction with water, which enhanced the desorption ratio, but decreased the initial adsorption rate. These results indicate that treating commercial SAPO-34 with 0.005 M NaOH enhances both the adsorption and desorption behaviors. (Keyword) Alkali treatment / Silicoaluminophosphate molecular sieves / Water / adsorption / Desorption (Link to Publication Site) ● Publication site (DOI): 10.4236/jeas.2019.94008 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.4236/jeas.2019.94008 (DOI: 10.4236/jeas.2019.94008)
8.	Takuya Ehiro, Satoshi Doshi, Masahiro Katoh and Shigeru Sugiyama : Catalytic Activity and Coking Resistance on Hydroxyapatite for the Oxidative Dehydrogenation of Isobutane, Phosphorus Research Bulletin, Vol.35, 48-54, 2019. (Tokushima University Institutional Repository) ● Metadata: 114835 (Link to Publication Site) ● Publication site (DOI): 10.3363/prb.35.48 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.3363/prb.35.48 (Tokushima University Institutional Repository: 114835, DOI: 10.3363/prb.35.48)
9.	Shigeru Sugiyama, Kenji Wakisaka, Kenta Imanishi, Masashi Kurashina, Naohiro Shimoda, Masahiro Katoh and Jhy-Chern Liu : Recovery of Phosphate Rock Equivalents from Incineration Ash of Chicken Manure by Elution-precipitation Treatment, Journal of Chemical Engineering of Japan, Vol.52, No.9, 778-782, 2019. (Summary) In order to obtain calcium phosphates - a phosphate rock equivalent - from the incineration ash of chicken manure, which is obtained from power generation systems that use the manure for fuel, incineration ash was treated with an aqueous solution of nitric acid to elute phosphorus. By using 0.3 M of HNO3, most of the phosphorus could be eluted from 1.0 g of ash within 0.1 h. Compared with the composted chicken manure that was previously examined in our laboratory, the concentration of HNO3 was increased for this session of elution. Using the incineration ash of chicken manure made it possible to remove inorganic species at a lower boiling or sublimation temperature, and organic species by calcination in the power generation system. Compared with composted chicken manure, the concentrations of phosphorus contained in the incineration ash and the nitric acid extract were higher in the incineration ash. XRD analysis showed that the obtained nitric acid extract could be treated with aqueous NH3 to form a precipitation of poorly-crystallized calcium hydroxyapatite (Ca10(PO4)6(OH)2), which is one of main components in phosphate rock. In order to confirm the formation and purity of calcium phosphate species, the precipitation calcination was conducted at 1,078 K for 5 h. XRD revealed that the calcined solid was tricalcium phosphate, and no contamination was evident. These results reveal that a phosphate rock equivalent could be easily obtained from the incineration ash of chicken manure, which means that approximately 14% of the phosphate rock that is currently being imported into Japan could be replaced by this product. (Keyword) Incineration ash / Chicken manure / Recovery of phosphorus / Phosphate rock equivalent (Tokushima University Institutional Repository) ● Metadata: 113780 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.19we030 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-85076244800 (Tokushima University Institutional Repository: 113780, DOI: 10.1252/jcej.19we030, Elsevier: Scopus)
10.	Shigeru Sugiyama, Yasuhiro Sakuwa, Tomoyasu Ogino, Naotaka Sakamoto, Naohiro Shimoda, Masahiro Katoh and Nobuhiro Kimura : Gas Phase Epoxidation of Propylene to Propylene Oxide on a Supported Catalyst Modified with Various Dopants, Catalysts, Vol.9, 638-649, 2019. (Summary) In the present study, the production of propylene oxide (PO) from propylene via gas phase epoxidation was investigated using various catalysts. Although Ag is known to be a highly active catalyst for the epoxidation of ethylene, it was not active in the present reaction. Both Al and/or Ti showed high level of activity, however, which resulted in confusion. The present study was conducted to solve such confusion. The intent of the present study was to solve such confusion. Although the employment of MCM 41 modified with Ti and/or Al was reported as an active catalyst for epoxidation, the combination resulted in a formation of PO that amounted to less than a 0.1% yield. Since this research revealed that the acidic catalyst seemed favorable for the formation of PO, versions of ZSM 5 that were both undoped and doped with Na, Ti and Ag were used as catalysts. In these cases, small improvements of 0.67 and 0.57% were achieved in the PO yield on H ZSM 5 and Ti ZSM 5. Based on the results of the Ti dopant and acidic catalysts, Ag metal doped on carbonate species with a smaller surface area was used as a catalyst. As reported, Ag Na/CaCO3 showed a greater yield of PO at 1.29%. Furthermore, the use of SrCO3 for CaCO3 resulted in a further improvement in the PO yield to 2.17%. An experiment using CO2 and NH3 pulse together with SEM and TEM examinations for Ag Na/CaCO3 revealed that the greatest amount of activity was the result of the greater particle size of metallic Ag rather than the acid base properties of the catalysts. (Tokushima University Institutional Repository) ● Metadata: 113779 (Link to Publication Site) ● Publication site (DOI): 10.3390/catal9080638 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.3390/catal9080638 (Tokushima University Institutional Repository: 113779, DOI: 10.3390/catal9080638)
11.	Yuki Kato, Shinya Nitta, Kenta Oribe, Masahiro Katoh, Wataru Ninomiya and Shigeru Sugiyama : Modifying SBA-15 with Binary Elements of Chromium and Molybdenum for Improved Catalytic Performance in the Oxidative Dehydrogenation of Isobutane to Isobutene, Journal of Chemical Engineering of Japan, Vol.52, No.6, 521-527, 2019. (Summary) In the oxidative dehydrogenation of isobutane to isobutene, selectivity and stability were improved by introducing chromium and molybdenum into SBA-15. The direct synthesis method (DM) was used to introduce these binary elements into SBA-15. Use of the DM resulted in a higher specific surface area of the catalyst and a greater dispersion of chromium and molybdenum species compared with a corresponding binary catalyst prepared using the incipient wetness impregnation method (IM). Selectivity to isobutene was improved, along with a decrease in the selectivities to CO and CO2 with the introduction of greater amounts of molybdenum, which suggests that molybdenum must suppress the tendency of isobutene to over-oxidate to either CO or CO2. The molybdenum species must be in close proximity to the chromium species, which results in the formation of an active Cr-O-Mo site. (Keyword) Oxidative dehydrogenation / Isobutane / Isobutene / SBA-15 / Chromium / Molybdenum (Tokushima University Institutional Repository) ● Metadata: 113778 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.18we202 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.18we202 (Tokushima University Institutional Repository: 113778, DOI: 10.1252/jcej.18we202)
12.	Masahiro Katoh, Ayaka Satoh, Michisato Kimura and Shigeru Sugiyama : Enhancement of water adsorption-desorption performance of aluminophosphate molecular sieves (AlPO-5) substituted with several metals, Journal of Chemical Engineering of Japan, Vol.52, No.2, 210-214, 2019. (Summary) Aluminophosphate molecular sieves (AlPO-5) were substituted with seven metals (Ca, Co, Mg, Ni, Sr, Cr and Fe). From XRD measurement, all patterns of seven substituted AlPO-5 were identical to that of the AFI structure. Except for Cr substituted for AlPO-5, they were mainly in a hexagonal pillar structure from SEM images. For Mg, Ni, Sr and Fe substituted for AlPO-5, the water adsorption capacity at 30 and the difference in the amount of adsorbed water between 30 (adsorption temperature) and 100 (desorption temperature) increased by the substitution. Although, for Fe substituted AlPO-5, the initial water adsorption rate was slightly decreased by the substitution, the water desorption temperature was equal for the temperature of AlPO-5. Because Fe substituted for AlPO-5 had about 1.8 times of water adsorption capacity at 30 and were able to be regenerated at 100, Fe substituted for AlPO-5 was most advantageous adsorbents. (Keyword) hAluminophospate molecular sieve / Water / Adsorption-desorption performance (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.18we069 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-85062810932 (DOI: 10.1252/jcej.18we069, Elsevier: Scopus)
13.	Yuki Kato, Shinya Nitta, Sho Shimazu, Masashi Kurashina, Masahiro Katoh, Wataru Ninomiya and Shigeru Sugiyama : Effect of Introduction of Trace Amount of Chromium Species in Improving Catalytic Performance of MCM-48 in Oxidative Dehydrogenation of Isobutane, Journal of Chemical Engineering of Japan, Vol.52, No.1, 99-105, 2019. (Summary) The catalytic performance of MCM-48 was greatly improved by the introduction of a small amount of chromium during the oxidative dehydrogenation of isobutane. Various characterization procedures such as XRD, N2 adsorption-desorption isotherms, TEM, NH3-TPD, XPS, and XAFS were used to clarify the role that chromium played in the improvement, and XPS and XAFS returned the most valuable information. Both measurements revealed that the chromium species existed as Cr6+ inside the framework of MCM-48 before oxidative dehydrogenation, but was reduced to Cr3+ during the reaction. The characteristic pore nature of MCM-48 also contributed to an enhancement of the selectivity to isobutene via a suppression of any consecutive oxidation reactions. (Keyword) Oxidative dehydrogenation / Isobutane / Isobutene / MCM-48 / Chromium (Tokushima University Institutional Repository) ● Metadata: 113241 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.18we028 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-85062808327 (Tokushima University Institutional Repository: 113241, DOI: 10.1252/jcej.18we028, Elsevier: Scopus)
14.	Shigeru Sugiyama, Yoto Tsuchiya, Gasmalla Hamid Elbakhit Rayan, Toshihide Horikawa, Masahiro Katoh, Yuka Arai and Masamori Akamatsu : Application of Si/SiC Ceramic Filters as Support for Structural Palladium Catalysts for the Reductive Decomposition of Aqueous Nitrite, Journal of the Ceramic Society of Japan, Vol.126, No.9, 714-718, 2018. (Summary) A Si/SiC ceramic filter was used to support a structural palladium catalyst in a continuous fixed-bed flow reactor during a reductive decomposition of nitrite. A previous report described the use of non-porous alumina spheres coated with Pd/C, a carbon monolith impregnated with Pd or a structural catalyst consisting of a polyurethane sponge skeleton impregnated with Pd resulted either in negligible activity or a complete stoppage of the flow by increasing the pressure drop in the flow system. The use of a Si/SiC filter impregnated with palladium, however, overcame the demerits and resulted in an 11% conversion of nitrite in 60 min. The use of a Si/SiC filter coated with a char intermediate followed by impregnation with Pd (Pd/C/Si/SiC) resulted in a structural catalyst that enhanced the activity to yield a 33% conversion of nitrite in 60 min. When five Pd/C/Si/SiC structural catalysts were used, however, the complete decomposition was achieved in the same amount of time. Although improvement was previously observed by using an alumina intermediate, use of the char intermediate resulted in a new factor for activity improvement. The characterization results show that it was the affinity between aqueous nitrite and the intermediate rather than palladium dispersion that contributed the most to the improvement of activity. (Keyword) Si/SiC Ceramic Filter / Reductive Decomposition / Nitrite / Palladium / Char Intermediate (Tokushima University Institutional Repository) ● Metadata: 112187 (Link to Publication Site) ● Publication site (DOI): 10.2109/jcersj2.18069 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-85052566796 (Tokushima University Institutional Repository: 112187, DOI: 10.2109/jcersj2.18069, Elsevier: Scopus)
15.	Masahiro Katoh, Norimasa Yoshida, Naoto Yamada, Daiki Mine, kenji Ohnishi, Daisuke Yonekura and Shigeru Sugiyama : Enhancement in Boiling Heat Transfer for Water Using a Polished Plate Surface, Journal of Chemical Engineering of Japan, Vol.51, No.6, 518-523, 2018. (Summary) The thermal characteristic of a plate evaporator for boiling water have been experimentally investigated. Stainless-steel plates with five kinds of surface roughness (a mirror-polished surface and four kinds of polished plate surface, F2, F0, F-1, and F-2 polishing) were used for the investigation. The roughness order is F-2>F-1>F0>F2>mirror. The local boiling heat transfers were measured on the evaporator surface using ten thermocouples inside the evaporator. For a comparison of the heat transfer characteristic of the evaporator, the local boiling heat transfer coefficient was measured when the polishing direction was perpendicular or parallel to the water flow at a range of pressures (0.30.4MPa) and flow rates (2060mL/min). The results indicate that the local heat transfer coefficient increased with increasing vapor quality at all surface conditions. For F0 polishing, the heat transfer coefficient on the surface with perpendicular polishing was much larger than that on the surfaces with parallel and mirror polishing. In particular, the heat transfer coefficient of the perpendicularly polished surface (F2 and F0 polishing) was increased six-fold in comparison with that of the mirror surface at a vapor quality of 0.35. However, for the F-1 and F-2 perpendicularly polishing plates, the heat transfer coefficients were smaller than those of the F0 and F2 perpendicularly polishing plates. For the F2 perpendicularly polished plate, heat transfer enhancement was confirmed, along with an increase in the number of bubbling points, on increasing the system pressure. For the polished surface, the heat transfer coefficient increased with increasing flow rate. This indicates that the bubble formation cycle was promoted by an increased flow rate. (Keyword) Boiling heat transfer enhancement / Water / Plate heat transfer / Polished plate surface (Tokushima University Institutional Repository) ● Metadata: 111975 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.17we305 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.17we305 (Tokushima University Institutional Repository: 111975, DOI: 10.1252/jcej.17we305)
16.	Yuki Kato, Hisanobu Misu, Sho Shimazu, Masahiro Katoh, Wataru Ninomiya and Shigeru Sugiyama : Introduction of a Small Amount of Chromium to Enhance the Catalytic Performance of SBA-15 for the Oxidative Dehydrogenation of Isobutane to Isobutene, Journal of Chemical Engineering of Japan, Vol.51, No.5, 400-406, 2018. (Summary) Various solid oxide catalysts are active in the oxidative dehydrogenation of propane, but when these were used for the oxidative dehydrogenation of isobutane to isobutene, the yield was less than 2%. An improved yield of isobutene to 8% was obtained in the oxidative dehydrogenation of isobutane using folded-sheet mesoporous material (FSM-16) and mesoporous molecular sieve (MCM-41), either added or unadded with chromium via impregnation or template ion exchange methods. Further activity enhancement, however, could not be attained. In the present study, in order to introduce chromium cations into the framework of SBA-15 using a direct synthesis method, chromium nitrate was mixed with TEOS in an aqueous starting solution with pH adjusted to 1.5, which was followed by the hydrothermal treatment. Loading the resultant catalyst, SBA-15, with a small amount of chromium (1.84 wt% Cr-SBA-15) returned a greater yield of isobutene (15.4%) at 723 K, although previous report showed that SBA-15 supported with chromium oxide (CrOx/SBA-15) prepared via incipient wetness impregnation showed a lower yield of isobutene (11%) at 813 K. In order to explain such an improvement, the catalysts were characterized using XRD, TEM, N2 adsorption-desorption and NH3 temperature-programmed desorption. A substantial amount of specific surface area (1,610 m2/g) was detected in active Cr-SBA-15, although the structural and acidic nature of the catalyst showed the general properties of other mesoporous silicas. It is possible that when the Cr6+ species is converted from Cr3+, the great specific surface area of Cr-SBA-15 could be a factor in the oxidative dehydrogenation of isobutane to isobutene. (Keyword) Oxidative dehydrogenation / Isobutane / Palladium / SBA-15 / Chromium (Tokushima University Institutional Repository) ● Metadata: 112186 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.17we311 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282679544242816 ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.17we311 (Tokushima University Institutional Repository: 112186, DOI: 10.1252/jcej.17we311, CiNii: 1390282679544242816)
17.	Shigeru Sugiyama, Naozumi Fukushima, Yuto Tsuchiya, Masahiro Katoh, Yukimi Hayashi, Yuka Arai and Masamori Akakatsu : Reductive Decomposition of Nitrite in a Continuous-Flow Reactor Using Fixed-Bed Structural Pd Catalysts, Journal of Chemical Engineering of Japan, Vol.51, No.1, 83-88, 2018. (Summary) In order to decompose trace amounts of nitrite in drinking water under mild conditions, a fixed-bed filtering system that used structural catalysts was employed to filter recycled aqueous nitrite. High performance and continuous mass processing are generally accepted as requirements to catalyze the decomposition of aqueous nitrite. However, the use of a fixed-bed operation when recycling aqueous nitrite with palladium catalyst systems could result in either negligible activity when using a carbon monolith impregnated with Pd, or could stop the flow by enhancing the pressure drop when using non-porous alumina spheres coated with Pd/C or structural catalysts consisting of a polyurethane sponge skeleton impregnated with Pd. In the present paper, a Si/SiC ceramic filter was employed as a structural support to prevent pressure drop. When palladium was loaded onto the surface of the filter via electroless plating, continuous flow suitably continued, and the conversion of nitrite was 45% after 60 min. In contrast, when palladium was loaded after the coating of the filter with alumina, complete decomposition was achieved after 60 min under conditions corresponding to those used for the former system. X-ray diffraction, an N2 adsorption-desorption measurement, scanning-electron microscopy, and energy-dispersive X-ray spectroscopy analyses revealed that a higher dispersion of palladium on the latter structural catalyst resulted in the greatest level of activity for the reductive decomposition of aqueous nitrite. (Keyword) Reductive decomposition / Nitrite / Palladium / Structural catalyst (Tokushima University Institutional Repository) ● Metadata: 111076 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.17we173 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.17we173 (Tokushima University Institutional Repository: 111076, DOI: 10.1252/jcej.17we173)
18.	Shigeru Sugiyama, Kohta Nagai, Yuki Nakao, and Masahiro Katoh : Catalyst Deactivation of a Silica-supported Bismuth-molybdenum Complex Oxide and the Related Complex Oxides for the Oxidative Dehydrogenation of 1-Butene to 1,3-Butadiene, Journal of Chemical Engineering of Japan, Vol.50, No.8, 641-647, 2017. (Summary) This study was an examination of the catalyst deactivation of a silica-supported bismuth-molybdenum complex oxide, and that of catalysts used in the absence of bismuth, for the oxidative dehydrogenation of 1-butene. Due to the detection of deactivation, the molar ratio of 1-butene against oxygen in the reactant gas was adjusted to a ratio similar to that used in industrial processes where reaction temperatures average 100 K higher. Regardless of the presence or absence of bismuth in the catalysts, the conversion of 1-butene was decreased by 6 h on-stream. Both the progress of the coking from the inlet to the outlet of the catalyst and the reduction of molybdenum in the catalysts directly contributed to the deactivation. X-ray photoelectron spectrometry revealed that a greater reduction of molybdenum in the near-surface region and a smaller partial pressure of oxygen (P(O2)) in the reactant gas, although the molybdenum on the surface was not reduced at all. This indicated that the lattice oxygen was pumped from the near-surface region to the surface during the reaction and the oxygen-poor conditions of the near-surface region both in the gas and catalyst phases were formed at a smaller P(O2), which resulted in the enhancements of both the reduction of molybdenum and that of coking. Based on the thermogravimetric analysis, the silica-supported bismuth-molybdenum complex oxide used at P(O2) = 4.1 kPa (color of the catalyst = black) was increased in weight while that used at P(O2) = 16.4 kPa (color of the catalyst = gray) showed a weight decrease, which indicated that the weight decrease caused by the reduction in molybdenum in the near-surface region used at 4.1 kPa was greater than the weight increase from the coking. It was concluded that the reduction in molybdenum followed by the coking on the catalyst surface were the main factors in the catalyst deactivation. (Keyword) Catalyst Deactivation / Bismuth-molybdenum oxide / Oxidative Dehydrogenation / 1-Butene / 1,3-Butadiene (Tokushima University Institutional Repository) ● Metadata: 111074 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.16we380 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.16we380 (Tokushima University Institutional Repository: 111074, DOI: 10.1252/jcej.16we380)
19.	Takuya Ehiro, Hisanobu Misu, Shinya Nitta, , Masahiro Katoh, Yuuki Katou, Wataru Ninomiya and Shigeru Sugiyama : Effects of Acidic-basic Properties on Catalytic Activity for the Oxidative Dehydrogenation of Isobutane on Calcium Phosphates, Doped and Undoped with Chromium, Journal of Chemical Engineering of Japan, Vol.50, No.2, 122-131, 2017. (Summary) The catalytic activities of calcium hydroxyapatite (HAp) and β-type tricalcium phosphate (β-TCP) were examined for their use in the oxidative dehydrogenation (ODH) of isobutane. β-TCP was catalytically inactive for the ODH of isobutane, but stoichiometric HAp returned a high isobutene yield (5.6%). The isobutane conversion and isobutene selectivity of HAp depended on the atomic ratio of Ca/P. HAp with a Ca/P = 1.67 showed the highest levels for both isobutene selectivity and isobutene yield from among HAp catalysts with different Ca/P ratios. Based on a characterization of the acidic-basic properties, it was evident that these acidic-basic properties affect the catalytic performance of HAp, and that its basicity is necessary for high catalytic activity. To improve the catalytic activities of calcium phosphates, they were impregnated with Cr. Despite a much lower surface area for β-TCP, Cr-impregnated β-TCP showed a higher isobutene yield (up to 8.4%) than that of Cr-impregnated HAp. The results of the XPS measurement showed that the Cr3+ species on calcium phosphates, together with the basicity, worked as active sites in the ODH of isobutane. (Keyword) Oxidative Dehydrogenation / Isobutane / Calcium Hydroxyapatite / Acidic property / Basic property (Tokushima University Institutional Repository) ● Metadata: 110026 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.16we217 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-85014537470 (Tokushima University Institutional Repository: 110026, DOI: 10.1252/jcej.16we217, Elsevier: Scopus)
20.	Naotaka Ohtake, Masahiro Katoh and Shigeru Sugiyama : High Thermal Stability Ceria Synthesized via Thermal Hydrolysis Route and Methane Combustion Performance, Journal of the Ceramic Society of Japan, Vol.125, No.2, 57-61, 2017. (Summary) Enhancement of the thermal stability of a catalyst is an efficient way to improve the catalytic activity of a catalytic reaction performed at high temperature. In this study, cerium oxide (ceria, CeO¬2) with a high thermal stability was synthesized by controlling the agglomeration of the primary particles via the thermal hydrolysis of ceric nitrate, accompanied by testing for the catalytic combustion of methane (CH4). The specific surface area of this material after calcination at 1,173 K for 5 h was 50 m2/g, which was much higher than that of the two references materials (ceria made via precipitation of cerous nitrate using aqueous ammonia at 4.1 m2/g, and the Japan reference catalyst JRC-CEO-1 at 1.4 m2/g). The ceria made via thermal hydrolysis showed high crystallinity and a much higher pore volume, which resulted in excellent thermal resistance. For O2 conversion in ceria, catalyzed CH4 combustion at 923 K, the ceria created in this study demonstrated higher activity than that for either reference. The high CH4 combustion performance was due to the high specific surface area and to a superior oxygen storage capacity (OSC) even after a combustion test. (Keyword) Cerium oxide / Thermal hydrolysis / Thermal stability / Catalytic combustion / Methane (Tokushima University Institutional Repository) ● Metadata: 110025 (Link to Publication Site) ● Publication site (DOI): 10.2109/jcersj2.16255 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.2109/jcersj2.16255 (Tokushima University Institutional Repository: 110025, DOI: 10.2109/jcersj2.16255)
21.	Keizo Nakagawa, Yoshiki Tezuka, Takuya Ohshima, Megumi Katayama, Toshimasa Ogata, Ken-Ichiro Sotowa, Masahiro Katoh and Shigeru Sugiyama : Formation of Cerium Carbonate Hydroxide and Cerium Oxide Nanostructures by Self-Assembly of Nanoparticles Using Surfactant Template and Their Catalytic Oxidation, Advanced Powder Technology, Vol.27, No.5, 2128-2135, 2016. (Link to Publication Site) ● Publication site (DOI): 10.1016/j.apt.2016.07.026 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84992598317 (DOI: 10.1016/j.apt.2016.07.026, Elsevier: Scopus)
22.	Naotaka Ohtake, Yoshiki Yamane, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Hydrothermally Synthesized Ceria with a High Specific Surface Area for Catalytic Conversion of Ethanol to Ethylene, Journal of Chemical Engineering of Japan, Vol.49, No.2, 197-203, 2016. (Summary) Morphological control can be used to improve the catalytic activity of cerium oxide (ceria, CeO2). For this study, ceria with a high specific surface area was synthesized via the hydrothermal reac-tion of ceric nitrate and was tested on the catalytic conversion of ethanol to ethylene. For a refer-ence, ceria was also synthesized via a precipitation reaction of cerous nitrate using aqueous am-monia. The Japan reference catalyst, JRC-CEO-1 also served as a reference. The specific surface area of the hydrothermally synthesized ceria was as high as that of JRC-CEO-1, but was much higher than that of either of the references after calcination at 873 K. Thermo-gravimetric analysis and IR spectroscopy revealed that the cerias made by hydrothermal and precipitation reactions consisted of high-purity CeO2, while the JRC-CEO-1 contained 1.5% decomposable functional groups (OH-, CO32-). For both ethanol conversion and ethylene selectivity in a catalytic dehydration reaction of ethanol, the activity of the hydrothermally developed ceria was higher than that for either of the references. The reaction pathway for the dehydration reaction of ethanol over ceria showed that the specific surface area and the basicity of the Lewis basic site of the ceria were specific influential properties. The high catalytic activity of the hydrothermally synthesized ceria derived from its high specific surface area and high-purity CeO2. (Keyword) Cerium Oxide / Hydrothermal Synthesis / Specific Surface Area / Catalytic Dehydration / Ethanol (Tokushima University Institutional Repository) ● Metadata: 109879 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.15we125 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84958777586 (Tokushima University Institutional Repository: 109879, DOI: 10.1252/jcej.15we125, Elsevier: Scopus)
23.	Takuya Ehiro, Ai Itagaki, Hisanobu Misu, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Wataru Ninomiya and Shigeru Sugiyama : Effects of Acid Treatment on the Acidic Properties and Catalytic Activity of MCM-41 for the Oxidative Dehydrogenation of Isobutane, Journal of Chemical Engineering of Japan, Vol.49, No.2, 152-160, 2016. (Summary) Mesoporous silicas have shown promise as materials for solid catalysts or catalyst supports due to their unique characteristics. Metal-doped mesoporous silicas are known to be catalytically active in the oxidative dehydrogenation (ODH) of isobutane. However, heavy-metal-free mesoporous silicas have not been studied closely for their use as catalysts. In the present study, MCM-41 (#41 Mobil composition of matter) was acid-treated to enhance its catalytic activity, although pure MCM-41 was confirmed as catalytically inactive for the ODH of isobutane (isobutene yield = 0.9%). The pH of a slurry of as-synthesized MCM-41 was changed during acid treatment. A pH adjustment to 6.5 resulted in great improvement in catalytic activity (isobutene yield = 6.1%), but a pH adjustment to 4.5 resulted in insufficient improvement (isobutene yield = 4.5%). It was confirmed via XRD and N2 adsorption-desorption measurement that the pH adjustment to 4.5 degraded the ordered structure of MCM-41. This degradation would be a crucial factor that would render acid treatment less effective. In addition to the acid treatment, Al doping to MCM-41 was conducted. Al doping also greatly enhanced the acidity and catalytic activity of MCM-41. (Keyword) Oxidative dehydrogenation / Isobutane / MCM-41 / Acid treatment / Template ion exchange (Tokushima University Institutional Repository) ● Metadata: 109878 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.15we155 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84958746343 (Tokushima University Institutional Repository: 109878, DOI: 10.1252/jcej.15we155, Elsevier: Scopus)
24.	Shigeru Sugiyama, Ryuta Kitora, Haruka Kinoshita, Keizo Nakagawa, Masahiro Katoh and Kiyohiko Nakasaki : Recovery of Calcium Phosphates from Composted Chicken Manure, Journal of Chemical Engineering of Japan, Vol.49, No.2, 224-228, 2016. (Summary) To recover phosphorus from composted chicken manure, a batch method with aqueous HNO3, HCl and H2SO4 was used to examine the elution behavior of the aqueous calcium and phosphate contained in the manure. Since the main components in manure are Ca2+ and K+ along with PO43- and those ions can be dissolved using an acidic eluate, it was expected that most of the aqueous Ca2+, K+ and PO43- could be obtained via the elution. Therefore, it seemed plausible that the removal of the aqueous K+ obtained by the elution of composted chicken manure would result in the formation of calcium phosphates. If calcium phosphates are formed, they can be used for phosphate rock, which also consists of various calcium phosphates. When using 0.1 mol/L HNO3, HCl or H2SO4, the elution behavior of the PO43- was not dependent on the acids. However, 0.1 mol/L H2SO4 was not sufficient for the elution of Ca2+, probably due to the precipitation of the calcium sulfate. The eluted amount of K+ using 0.1 mol/L HNO3 was lower than that using 0.1 mol/L of either HCl or H2SO4. Since the poor elution of K+ should enrich the concentrations of Ca2+ and PO43- in the acidic aqueous solution after the elution, it was suggested that aqueous HNO3 would be suitable as an eluate in the present system. After the elution of the composted chicken manure, when 0.1 mol/L HNO3 was used to adjust the solution pH of the acidic aqueous solution to greater than 6, Ca2+ and PO43- were precipitated, but K+ was not. The precipitation was calcium hydroxyapatite, one of the typical components of phosphate rock, which showed that composted chicken manure could be replaced phosphate rock as a new source of phosphorus. (Keyword) Composted chicken manure / Recovery of phosphate / Calcium phosphate (Tokushima University Institutional Repository) ● Metadata: 109944 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.15we111 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84958766445 (Tokushima University Institutional Repository: 109944, DOI: 10.1252/jcej.15we111, Elsevier: Scopus)
25.	Takuya Ehiro, Ai Itagaki, Hisanobu Misu, Masashi Kurashina, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Wataru Ninomiya and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane to Isobutene on Metal-doped MCM-41 Catalysts, Journal of Chemical Engineering of Japan, Vol.49, No.2, 136-143, 2016. (Summary) MCM-41 (#41 Mobil Composition of Matter) is a favorable material for heterogeneous reactions because of its unique porous structure. However, the catalytic activity of MCM-41 for the oxidative dehydrogenation (ODH) of isobutane to isobutene is known to be quite low. In the present study, a metal-doping method was employed to improve this catalytic activity. Doping of Cr, Co, Ni, or Mo into MCM-41 resulted in a great improvement in the catalytic activity. Since chromium-doped MCM-41 (Cr-MCM-41) showed the greatest catalytic activity among these catalysts, its redox property was further analyzed via XPS, XAFS and H2-TPR techniques. The XPS spectrum of Cr-MCM-41 suggested that it has Cr3+ and Cr6+ species on its surface. Also, a pre-edge peak due to Cr6+ species was confirmed in the XANES spectrum of Cr-MCM-41. In H2-TPR measurement, Cr-MCM-41 was more reducible than crystalline Cr2O3, which showed low catalytic activity for the ODH of isobutane. The reducible Cr6+ species on Cr-MCM-41 contributed to an improvement in the catalytic activity of MCM-41. (Keyword) Oxidative dehydrogenation / Isobutane / Isobutene / MCM-41 / Metal-doping (Tokushima University Institutional Repository) ● Metadata: 109877 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.15we106 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.15we106 (Tokushima University Institutional Repository: 109877, DOI: 10.1252/jcej.15we106)
26.	Masahiro Katoh, Ayaka Satoh, Toshihide Horikawa, Keizo Nakagawa and Shigeru Sugiyama : The effects of created mesopores in ZSM-5 zeolites by an alkali treatment on water adsorption, Journal of Chemical Engineering of Japan, Vol.49, No.2, 120-125, 2016. (Summary) Three kinds of ZSM-5 zeolites (SiO2/Al2O3=23.8 (Na-form), 39.0 (NH4-form) and 193(NH4-form)) were alkali-treated, and the changes in structural and water adsorptive properties were investigated. With the alkali treatment, the MFI structure was kept; a siliceous species was selectively dissolved from the framework of a zeolite, and the mesopores were created in the zeolites. At the same time, NH4-form ZSM-5 zeolites (SiO2/Al2O3=39.0 and 193) were ion-exchanged to form Na in an aqueous solution of NaOH. In particular, for ZSM-5 (SiO2/Al2O3=23.8), the water adsorption property was changed with the alkali treatment. The difference in the amount of adsorbed water on the zeolite between 30℃ (adsorption temperature) and 100℃(desorption temperature) was increased by the treatment. The desorption temperature of water adsorbed at the stronger site was decreased from 106℃ to 72℃ with the alkali treatment. These results indicate that the introduction of mesopores in ZSM-5 contributed to the enhanced water adsorption properties. (Keyword) ZSM-5 zeolite / Alkali treatment / Mesopore / Water adsorption (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.15we129 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84958775807 (DOI: 10.1252/jcej.15we129, Elsevier: Scopus)
27.	Takuya Ehiro, Ai Itagaki, Masashi Kurashina, Masahiro Katoh, Keizo Nakagawa, Yuuki Katou, Wataru Ninomiya and Shigeru Sugiyama : Effect of the Template Ion Exchange Behaviors of Chromium into FSM-16 on the Oxidative Dehydrogenation of Isobutane, Journal of the Ceramic Society of Japan, Vol.123, No.12, 1084-1089, 2015. (Summary) The template ion exchange of chromium cations into FSM-16 (#16 Folded Sheets Mesoporous Materials) for 247 h resulted in a 2.89 wt% incorporation of those cations into the FSM-16, although only a 0.3 wt% incorporation had previously been reported. The XRD pattern of the resultant solid (Cr-FSM-16) showed that the hexagonal structure characteristic of FSM-16 remained after the 2.89 wt% incorporation of chromium cations. XPS could be used to detect the Cr3+ and Cr6+ species on the surface of Cr-FSM-16. A pre-edge peak that was due to a tetrahedrally coordinated Cr6+ species was confirmed in the XANES spectrum of the Cr-FSM-16, which showed that the coordination state around some Cr species was similar to that around the Si species in FSM-16. With the increase in the amount of chromium cations in FSM-16, its catalytic activity and stability during the oxidative dehydrogenation of isobutane were evidently improved. (Keyword) Template Ion Exchange / FSM-16 / Chromium / Oxidative Dehydrogenation / Isobutane (Tokushima University Institutional Repository) ● Metadata: 109868 (Link to Publication Site) ● Publication site (DOI): 10.2109/jcersj2.123.1084 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84948769052 (Tokushima University Institutional Repository: 109868, DOI: 10.2109/jcersj2.123.1084, Elsevier: Scopus)
28.	Masahiro Katoh, Michisato Kimura, Mao Sugino, Toshihide Horikawa, Keizo Nakagawa and Shigeru Sugiyama : Modification of commercial NaY zeolite to give high water diffusivity and adsorb a large amount of water, Journal of Colloid and Interface Science, Vol.455, 220-225, 2015. (Summary) By using NaY zeolites as desiccant materials, commercial NaY zeolite was alkali treated with 1M NaOH aqueous solution and then Mg2+ ion-exchanged by 0.5M Mg(NO3)2 aqueous solution. Alkali treatment (AT) of NaY zeolite removed silicon atoms selectivity from the framework of Y-type zeolite and enhanced water diffusivity of Y-type zeolite. On the other hand, Mg2+ ion-exchange of NaY zeolite increased the amount of water adsorbed. Prepared Y-AT-Mg zeolite had both water adsorption velocity and a large difference of water adsorbed amount between adsorption at 30℃ and desorption at 100℃. (Keyword) Commercial NaY zeolite / Alkali treatment / ion exchange / High water diffusivity / Large water capacity (Link to Publication Site) ● Publication site (DOI): 10.1016/j.jcis.2015.05.050 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84930959975 (DOI: 10.1016/j.jcis.2015.05.050, Elsevier: Scopus)
29.	Keizo Nakagawa, Takuya Ohshima, Yoshiki Tezuka, Megumi Katayama, Masahiro Katoh and Shigeru Sugiyama : Morphological effects of CeO2 nanostructures for catalytic soot combustion of CuO/CeO2, Catalysis Today, Vol.246, 67-71, 2015. (Link to Publication Site) ● Publication site (DOI): 10.1016/j.cattod.2014.08.005 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84923384342 (DOI: 10.1016/j.cattod.2014.08.005, Elsevier: Scopus)
30.	Ming Cai, Hitoshi Takagi, Antonio Norio Nakagaito, Kazuya Kusaka, Masahiro Katoh and Yan Li : Influence of alkali concentration on morphology and tensile properties of abaca fibers, Advanced Materials Research, Vol.1110, 302-305, 2015. (Link to Publication Site) ● Publication site (DOI): 10.4028/www.scientific.net/AMR.1110.302 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.4028/www.scientific.net/AMR.1110.302 (DOI: 10.4028/www.scientific.net/AMR.1110.302)
31.	Shigeru Sugiyama, Yasuhiro Okada, Yoshiki Yamane, Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : Effects of the Acidic Properties of FSM-16 on the Catalytic Conversion of 1,2-Propandiol in the Presence and Absence of Hydrogen, Journal of Chemical Engineering of Japan, Vol.48, No.3, 215-221, 2015. (Summary) In our previous paper, we showed how the catalytic conversion of 1,2-propandiol to propanal using FSM-16 (#16 Folded Sheets of Mesoporous materials) when molded by wet treatment proceeded more favorably than when using FSM-16 molded by pressurization, while no comparison using other typical acidic catalysts and no examination of the acidic properties of FSM-16 was carried out. In the present study, the conversion using FSM-16 molded by wet-treatment and pressurization was compared with the use of typical acidic catalysts such as SiW12O40/SiO2 and MCM-41 (#41 of Mobil Composition of Matter) together with amorphous SiO2. Among these catalysts, FSM-16 molded by wet treatment showed the most suitable catalytic activity. In order to examine the effect of the molding procedure for FSM-16 on its structural and acidic properties, FSM-16 molded by both methods was examined using NH3-TPD, in-situ FT-IR using NH3 as a probe molecule and Hammett indicators together with XRD and TEM. According to Zaitsev's rule, the present conversion should afford acetone rather than propanal, which indicates that it would proceed via hydro-cracking. Therefore the conversion of 1,2-propandiol using FSM-16 was also examined in the presence and absence of hydrogen. Furthermore the hydrations of 1- and 2-propanol when using FMS-16 were also examined. Based on the results obtained from this investigation, it was concluded that the conversion using a more acidic FSM-16 molded by wet treatment proceeded through dehydration rather than through hydro-cracking. (Keyword) Catalytic Conversion / 1,2-Propandiol / Propanal / FSM-16 / Acidic Properties (Tokushima University Institutional Repository) ● Metadata: 109890 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.14we136 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390001204569414528 ● Summary page in Scopus @ Elsevier: 2-s2.0-84925135804 (Tokushima University Institutional Repository: 109890, DOI: 10.1252/jcej.14we136, CiNii: 1390001204569414528, Elsevier: Scopus)
32.	Ming Cai, Hitoshi Takagi, Antonio Norio Nakagaito, Masahiro Katoh, Tomoyuki Ueki, Geoffrey I.N. Waterhouse and Yan Li : Influence of alkali treatment on internal microstructure and tensile properties of abaca fibers, Industrial Crops and Products, Vol.65, 27-35, 2015. (Summary) The objective of this study is to investigate the effect of alkali treatment on the internal microstructure and tensile properties of abaca fibers. The abaca fibers were immersed in aqueous solutions of NaOH (5, 10, or 15 wt%) for 30 min, rinsed and dried. The fibers were subsequently characterized by scanning electron microscopy, X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), and tensile strength tests. The lumen is a hollow region in each elementary fiber of the abaca fiber bundles. It was found that the lumen of the abaca fibers completely collapsed after 10 and 15 wt% NaOH treatment, due to swelling of the fibers. The fibers also became twisted after these alkali treatments. It was found that cellulose I in abaca fibers was partially transformed to cellulose II after 15 wt% NaOH treatment, as evidenced by XRD measurements. FT-IR analysis indicated that the alkali treatment led to a gradual removal of binding materials; such as hemicelluloses and lignin, from the abaca fibers, resulting in the separation of abaca fiber bundles into individual elementary fibers. The tensile strength of alkali-treated abaca fibers did not vary with alkali concentration. The Young's modulus of the abaca fibers treated with 5 wt% NaOH solution increased by 41%, whereas those treated with 10 and 15 wt% NaOH solution decreased by 24 and 29%, respectively. A non-linear behavior was observed in the stress strain curves of the abaca fibers after 10 and 15 wt% alkali treatment, which could be attributable to the twisting of the fibers. (Keyword) Abaca fiber / Lumen / Twisting / Alkali treatment / Tensile properties (Link to Publication Site) ● Publication site (DOI): 10.1016/j.indcrop.2014.11.048 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84949115274 (DOI: 10.1016/j.indcrop.2014.11.048, Elsevier: Scopus)
33.	Shigeru Sugiyama, Haruka Kinoshita, Ippei Shinomiya, Ryuta Kitora, Keizo Nakagawa, Masahiro Katoh and Kohei Masumoto : Recovery of the Phosphorus from the Nitric Acid Extract of Powder Collected in a Bag Filter during the Recycling of Used Fluorescence Tubes, Journal of Chemical Engineering of Japan, Vol.48, No.2, 99-103, 2015. (Summary) rescence tubes (bag-powder), the batch method with aqueous HNO3 was used to examine the elution behavior of aqueous phosphate contained in the bag-powder. The main components of the bag-powder included Ca2+, PO43- and Y3+ along with Si4+, Sr2+ and lanthanide cations such as La3+ and Ce4+. Therefore, it seemed possible that, with the selective dissolution of Ca2+ and PO43- from the bag-powder, those lanthanide cations in the residue could be enriched. With the batch method, most of the phosphate in the bag-powder was dissolved within 0.2 min using 1.0 mol/L HNO3. The dissolution behavior of calcium cation was similar to that of the phosphate. In contrast, the dissolution of yttrium, the content of which was the highest among the lanthanide cations in the bag-powder, was increased with the dissolution times, reaching complete dissolution after 24 h. The Sr2+, La3+ and Si4+ in the bag-powder, however, did not dissolve under the same conditions. Although Ca2+, PO43- and Y3+ were the main components in the nitric acid extract, Y3+ was separated as YPO4 at pH = 4.0, while Ca2+ and PO43- were separated as calcium phosphates at pH= 7.0. These results revealed that the separation of calcium phosphates, YPO4 and some residue was possible, and resulted in the enrichment of lanthanide cations along with the recovery of phosphorus from the bag-powder. Using the present technique, 91% of the P in the bag-powder was recovered. (Keyword) Used fluorescence tube / Recovery of phosphate / Enrichment of rare earth elements (Tokushima University Institutional Repository) ● Metadata: 109888 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.14we171 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282679546568448 ● Summary page in Scopus @ Elsevier: 2-s2.0-84923206712 (Tokushima University Institutional Repository: 109888, DOI: 10.1252/jcej.14we171, CiNii: 1390282679546568448, Elsevier: Scopus)
34.	Shigeru Sugiyama, Takuya Ehiro, Yoshihisa Nitta, Ai Itagaki, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : Acidic Properties of Various Silica Catalysts Doped with Chromium for the Oxidative Dehydrogenation of Isobutane to Isobutene, Journal of Chemical Engineering of Japan, Vol.48, No.2, 133-140, 2015. (Summary) Although previous researchers have found that FSM-16 (#16 Folded Sheet Mesoporous material) doped with chromium and related Cr-doped silica catalysts has shown great activity for the oxidative dehydrogenation of isobutane to isobutene, information on the nature of these catalysts is insufficient. For this study, three types of Cr-doped silica catalysts were prepared by applying the template ion exchange method. CrOx/FSM-16 and CrOx/SiO2 were used as references. These catalysts were used for oxidative dehydrogenation, which was then characterized via various techniques. The most active catalyst was Cr-doped silica, which did not have the hexagonal structure that is characteristic of mesoporous FSM-16. Various characterizations showed that the catalytic activity of the Cr-species, stemmed from a weak acidic nature and a redox nature that originated from the combination of silicate and a Cr cation, as opposed to the hexagonal structure and strong acidic nature of FSM-16. (Keyword) Oxidative dehydrogenation / Isobutane / Isobutene / FSM-16 / Chromium-doping (Tokushima University Institutional Repository) ● Metadata: 109889 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.14we112 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390001204570218112 ● Summary page in Scopus @ Elsevier: 2-s2.0-84923188312 (Tokushima University Institutional Repository: 109889, DOI: 10.1252/jcej.14we112, CiNii: 1390001204570218112, Elsevier: Scopus)
35.	Keizo Nakagawa, Tiantian Jia, Weiran Zheng, Simon Michael Fairclough, Masahiro Katoh, Shigeru Sugiyama and Shik Chi Edman Tsang : Enhanced Photocatalytic Hydrogen Evolution from Water by Niobate Single Molecular Sheets and Ensembles, Chemical Communications, Vol.50, 13702-13705, 2014. (Summary) We report single molecular sheets of niobate prepared by a simple bottom-up approach using hydrothermal synthesis of niobium ethoxide with the aid of triethanolamine as a structural modifier: the high kinetic stability of these molecular entities against self-assembly allows them to mix well with other colloids and facilitates their extensive electronic interactions and thus photocatalytic hydrogen evolution activity from water is much enhanced over composite of single niobate sheets with graphene and MoS2 due to efficient electron transfer and charge separation. (Link to Publication Site) ● Publication site (DOI): 10.1039/C4CC04726E (Link to Search Site for Scientific Articles) ● PubMed @ National Institutes of Health, US National Library of Medicine (PMID): 25247882 ● Search Scopus @ Elsevier (PMID): 25247882 ● Search Scopus @ Elsevier (DOI): 10.1039/C4CC04726E (DOI: 10.1039/C4CC04726E, PubMed: 25247882)
36.	Shigeru Sugiyama, Ippei Shinomiya, Ryuta Kitora, Keizo Nakagawa and Masahiro Katoh : Recovery and Enrichment of Phosphorus from the Nitric Acid Extract of Dephosphorization Slag, Journal of Chemical Engineering of Japan, Vol.47, No.6, 483-487, 2014. (Summary) A method for the recovery and enrichment of the phosphate from dephosphorization slag was examined. First, the elution of aqueous phosphate from dephosphorization slag using aqueous HNO3 was examined using both the batch and flow methods. With the batch method, 82% of the dephosphorization slag could be dissolved within 30 min using 1.0 mol/L HNO3, indicating that the batch method could be used for mass processing to extract phosphorus in the bulk phase, but all components contained in the slag were unselectively dissolved. In contrast, by using 0.05 mol/L HNO3 via the flow method, 22% of the slag was dissolved for 100 min giving a more selective dissolution of phosphate from the slag compared with the batch method, which indicated that this method would be incompatible with mass processing for the purpose of extracting phosphorus in the bulk phase. In order to remove the Fe-species in the aqueous solution obtained by the batch method using 1.0 mol/L HNO3, which has been referred to as the ``slag solution,'' it was necessary to add calcium hydroxyapatite (CaHAp) to the slag solution. The optimal conditions for the removal of Fe-species using CaHAp were observed at a solution pH of ca. 1.5, which resulted in 100% removal of the Fe-species after 4 h. When the pH of the slag solution was adjusted to 7.0 after removing the Fe species, a pale pink solid sample was precipitated. The amounts of phosphate in the slag solution and in the pink solid were 3.5 and 42.0 mol%, respectively, indicating that the treatment suggested in the present study could be used for the recovery and enrichment of phosphate, that is, phosphorous, from dephosphorization slag. (Keyword) Dephosphorization slag / Recovery of phosphate / Enrichment of phosphate / Calcium hydroxyapatite (Tokushima University Institutional Repository) ● Metadata: 109887 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.13we065 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282679544567168 ● Summary page in Scopus @ Elsevier: 2-s2.0-84902793596 (Tokushima University Institutional Repository: 109887, DOI: 10.1252/jcej.13we065, CiNii: 1390282679544567168, Elsevier: Scopus)
37.	Kouji Kinouchi, Masahiro Katoh, Keizo Nakagawa, Shigeru Sugiyama, Takushi Yoshikawa and Mamoru Wada : Effect of Reaction Temperature and Steam to Carbon Ratio on Hydrogen Production for Steam Reforming of Bio-Ethanol Using the Palladium Membrane Reactor, Journal of Chemical Engineering of Japan, Vol.47, No.1, 14-20, 2014. (Summary) The steam reforming of bio-ethanol has been carried out to compare with reagent ethanol using a palladium membrane at several reaction conditions (673 or 873 K, ΔP=0.10 MPa and steam-to-carbon ratio (S/C)=4-10). The raw material of these experiments was surplus bio-ethanol, which is one of the by-products in fermentation with sulfuring process in cornstarch production. As a result, the amount of total H2 formation for bio-ethanol was comparable to that obtained with reagent ethanol under the same conditions. However, for bio-ethanol, the values of hydrogen permeate flow and hydrogen purity were smaller than that of reagent ethanol. In contrast, the amount of CO formed from bio-ethanol was greater than that from reagent ethanol. It is considered that carbon, which has a negative influence on the hydrogen-permeability of the palladium membrane, was produced from CO. The amount of CO was significantly decreased by lowering the temperature from 873 to 673 K. Moreover, CO was also decreased by increasing S/C and was not detected over S/C of 8. However, the amount of total hydrogen production and hydrogen permeate flow decreased by increasing the S/C ratio. Therefore, the best condition for hydrogen production from bio-ethanol using the palladium membrane reactor was at 673 K and S/C=8. (Keyword) Bio-Ethanol / Palladium Membrane Reactor / Hydrogen Production (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.13we099 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390001204567717376 ● Summary page in Scopus @ Elsevier: 2-s2.0-84892705908 (DOI: 10.1252/jcej.13we099, CiNii: 1390001204567717376, Elsevier: Scopus)
38.	Shigeru Sugiyama, Yoshihisa Nitta, Yukimi Furukawa, Ai Itagaki, Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Oxidative Dehydrogenation of Isobutane to Isobutene on FSM-16 Doped with Cr and Related Catalysts, Journal of Chemistry and Chemical Engineering, Vol.7, No.11, 1014-1020, 2013. (Summary) The oxidative dehydrogenation of isobutane to isobutene was examined for use in the preparation of FSM-16 and related compounds doped by chromium with expectations that a yield of isobutene of greater than 8% could be achieved. The activity depended on the molding procedure of the catalyst and the doping method of the chromium species. In the present study, 8.8 and 8.3% of the yield of isobutene were obtained at 0.75 and 6 h on-stream for the catalyst (Cr-loading; 6.2 wt.%) molded using wet treatment but not pressurization treatment, in which the chromium species were directly added into the aqueous solution containing raw FSM-16 (hydrated sodium silicate powder) at an initial stage of the catalyst preparation. The structure information was based on XRD, the specific surface area was determined using a conventional BET nitrogen adsorption and the loading of chromium was estimated using ICP. All those parameters combined with the molding method indicated that the catalytic activity was more influenced by the loading of chromium into bulk but not on surface of the catalyst rather than by the hexagonal structure of FSM-16 and the surface area. (Keyword) Oxidative dehydrogenation / Isobutane / Isobutene / FSM-16 / Chromium-doping
39.	Shigeru Sugiyama, Yasuhiro Okada, Youhei Kosaka, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : The Catalytic Conversion of 1,2-Propandiol to Propanal on FSM-16 Molded by Wet-Treatment and Pressurization, Journal of Chemical Engineering of Japan, Vol.46, No.9, 620-624, 2013. (Summary) The catalytic conversion of 1,2-propandiol to propanal is examined using FSM-16 particles (0.85-1.75 mm) molded by wet-treatment and pressurization. When FSM-16 was molded with 0.6 g of pressurization and supplied to the catalytic conversion of 1,2-propandiol at 673 K, this system resulted in a 94.8% conversion of 1,2-propandiol and 90.5% selectivity to propanal at 0.25 h on-stream, which was the maximum amount of activity. However, at 4.50 h on-stream, the activity was decreased extremely to deactivation 19.9% conversion of 1,2-propandiol and 84.7% selectivity to propanal. In contrast, when FSM-16 molded with wettreatment (0.15 g) was used for the conversion at 573 K, activity was greatly increased and stable 98.6% conversion of 1,2-propandiol and 56.2% selectivity to propanal at 0.25 h on-stream followed by 91.9% and 52.5%, respectively, at 4.50 h on-stream. The hexagonal structure of FSM-16 was suggested to have contributed to the suitable conversion of 1,2-propandiol to propanal. (Keyword) Catalytic conversion / 1,2-Propandiol / Propanal / FSM-16 (Tokushima University Institutional Repository) ● Metadata: 109943 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.13we059 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.13we059 (Tokushima University Institutional Repository: 109943, DOI: 10.1252/jcej.13we059)
40.	Shigeru Sugiyama, Takuya Bando, Yusuke Seno, Emiko Watanabe, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : The Oxidative Esterification of Propionaldehyde to Methyl Propionate in the Liquid-phase Using a Heterogeneous Palladium Catalyst, Journal of Chemical Engineering of Japan, Vol.46, No.7, 455-460, 2013. (Summary) The optimization of the oxidative esterification of propionaldehyde to methyl propionate using a supported palladium catalyst in methanol under heavy-metal-free and pressurized-oxygen conditions, which we recently reported in a previous paper, were carried out together with a study of the reaction route, the nature of the catalytic active sites, and the effect of the support. In our previous paper, we reported significantly improved activity for oxidative esterification using commercially available 5%Pd/Al2O3 at 1.5 MPa of O2 gas and 333 K and emphasized that the doping of 5%Pd/Al2O3 with lead was not needed for the reaction system, but we could not improve the activity that was reported when using 5%Pd/ -Al2O3 doped with 5% Pb (a 93.2% conversion of propionaldehyde, 76.8% selectivity for methyl propionate and a 71.6% yield of methyl propionate) at 0.3 MPa of O2 gas and 353 K, as reported by another laboratory. In the present study, however, we exceeded those values and obtained a 98.3% conversion of propionaldehyde, 75.3% selectivity for methyl propionate and a 74.0% yield of methyl propionate using 5%Pd/ -Al2O3 undoped with Pb at 1.5 MPa of O2 gas and 333 K. It should be noted that, in the preparation of the present 5%Pd/ -Al2O3, Pd was doped onto Al2O3 that had been previously treated with aqueous NaOH. Another active alumina support, -Al2O3, prepared from boehmite, afforded activity that was substantially lower than that of -Al2O3 and depended on the calcination temperature of boehmite to -Al2O3. When using various concentrations of CH3OH in the aqueous reaction solution, the oxidative esterification proceeded through the formation of propionic acid. To determine why Al2O3 support afforded better activity than active carbon support, Pd/Al2O3 and Pd/C catalysts were examined by XAFS (X-ray absorption fine structure). XAFS revealed that Pd on Al2O3 shows a better redox nature than Pd on C, which resulted in activity on Pd/Al2O3 that was better than that on Pd/C. (Keyword) Oxidative esterification / Propionaldehyde / Methyl propionate / Palladium catalyst / Pressurized oxygen (Tokushima University Institutional Repository) ● Metadata: 109942 (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.12we259 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.12we259 (Tokushima University Institutional Repository: 109942, DOI: 10.1252/jcej.12we259)
41.	Toshihide Horikawa, Sakao Noriyuki, Hayashi Jun'ichi, Do D.D., Masahiro Katoh and Ken-Ichiro Sotowa : Preparation of nitrogen-doped porous carbon and its water adsorption behaviour, Adsorption Science & Technology, Vol.31, No.2+3, 135-144, 2013. (Link to Publication Site) ● Publication site (DOI): 10.1260/0263-6174.31.2-3.135 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84877944653 (DOI: 10.1260/0263-6174.31.2-3.135, Elsevier: Scopus)
42.	Mohamed Reda Berber, Inas Hazzaa Hafez, Keiji Minagawa, Masahiro Katoh, Takeshi Mori and Masami Tanaka : Uniform nanoparticles of hydrotalcite-like materials and their textural properties at optimized conditions of urea hydrothermal treatment, Journal of Molecular Structure, Vol.1033, 104-112, 2013. (Link to Publication Site) ● Publication site (DOI): 10.1016/j.molstruc.2012.08.028 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1016/j.molstruc.2012.08.028 (DOI: 10.1016/j.molstruc.2012.08.028)
43.	Masahiro Katoh, Ryuhei Koide, Kenzo Yamada, Takanori Yoshida and Toshihide Horikawa : IR SPECTROSCOPIC ANALYSIS OF THERMAL BEHAVIOR OF ADSORBED WATER ON Y-TYPE ZEOLITE, International Journal of Modern Physics: Conference Series, Vol.6, 437-442, 2012. (Tokushima University Institutional Repository) ● Metadata: 114739 (Link to Publication Site) ● Publication site (DOI): 10.1142/S2010194512003571 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1142/S2010194512003571 (Tokushima University Institutional Repository: 114739, DOI: 10.1142/S2010194512003571)
44.	Kouji Kinouchi, Masahiro Katoh, Toshihide Horikawa, Takushi Yoshikawa and Mamoru Wada : HYDROGEN PERMEABILITY OF PALLADIUM MEMBRANE FOR STEAM-REFORMING OF BIO-ETHANOL USING THE MEMBRANE REACTOR, International Journal of Modern Physics: Conference Series, Vol.6, 7-12, 2012. (Tokushima University Institutional Repository) ● Metadata: 114740 (Link to Publication Site) ● Publication site (DOI): 10.1142/S2010194512002851 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1142/S2010194512002851 (Tokushima University Institutional Repository: 114740, DOI: 10.1142/S2010194512002851)
45.	Mohamed Reda Berber, Inas Hazzaa Hafez, Keiji Minagawa, Masahiro Katoh, Masami Tanaka and Takeshi Mori : CONTROL OF NANOPARTICLE SIZE, CRYSTAL STRUCTURE AND GROWTH OF LAYERED DOUBLE HYDROXIDE BY HYDROTHERMAL TREATMENT, International Journal of Modern Physics: Conference Series, Vol.6, 133-137, 2012. (Link to Publication Site) ● Publication site (DOI): 10.1142/S2010194512003066 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1142/S2010194512003066 (DOI: 10.1142/S2010194512003066)
46.	Toshihide Horikawa, Sakao Noriyuki, Sekida Tomoki, Hayashi Jun'ichi, Do D. D. and Masahiro Katoh : Preparation of nitrogen-doped porous carbon by ammonia gas treatment and the effects of N-doping on water adsorption, Carbon, Vol.50, No.5, 1833-1842, 2012. (Link to Publication Site) ● Publication site (DOI): 10.1016/j.carbon.2011.12.033 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1016/j.carbon.2011.12.033 (DOI: 10.1016/j.carbon.2011.12.033)
47.	Toshihide Horikawa, Asano Hiroyuki, Akiyama Kazuhide, Nakahara Daisuke and Masahiro Katoh : Effects of the organic solvent in carrier gas on the prepared TiO2 thin film by metal-organic chemical vapor deposition method, International Journal of Modern Physics B, Vol.25, No.31, 4171-4174, 2011. (Link to Publication Site) ● Publication site (DOI): 10.1142/S0217979211066519 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1142/S0217979211066519 (DOI: 10.1142/S0217979211066519)
48.	Eiji Kanezaki and Masahiro Katoh : IN SITU HIGH TEMPERATURE FT-IR STUDY OF THE INTERLAYER NAPHTHALENE-2,6-DISULFONATE IN Mg AND AL LAYERED DOUNLE HYDROXIDE, International Journal of Modern Physics B, Vol.31, No.31, 4185-4189, 2011. (Keyword) LDH with interlayer naphthalenedisulfonate / FT-IR spectra at high temperature (Link to Publication Site) ● Publication site (DOI): 10.1142/S0217979211066544 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-84855212104 (DOI: 10.1142/S0217979211066544, Elsevier: Scopus)
49.	Daisuke Yonekura, 高橋雅也, Ri-ichi Murakami, Masahiro Katoh and 大西賢治 : Influence of Particle Size on Anti-Adhesion Effect of Surface Polished Steel Plate, Transactions of The Japan Society of Mechanical Engineers, Series C, Vol.77, No.775, 1161-1170, 2011. (Summary) In this paper, we examined the influence of particle size on anti-adhesion effect of a surface polished steel plate. SiO2 spherical powders and stainless steel plates with seven kinds of surface roughness were used for the investigation. The adhesion tests of SiO2 powders to the polished stainless steel plates were performed using powders of nominal size 9 and 13μm. In the case of 13μm powder, the obvious adhesion and deposition of powder was not observed for all steel surface conditions. However, strong adhesion of particles and thin deposition layers were observed for 9μm powder, being independent of surface roughness of the steel plates. The size of adhered particles on the steel plate were measured by SEM observations in order to examine the adhesion mechanism of SiO2 particle to the polished stainless plate substrate. As a result, adhesion of 3-5 μm particles to the steel surface was largely independent of surface roughness. The adhesion of 3-5 μm particles can be avoided by mixing of small particles of 0.5μm powder into 9μm powder. (Link to Publication Site) ● Publication site (DOI): 10.1299/kikaic.77.1161 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282681363332608 ● Summary page in Scopus @ Elsevier: 2-s2.0-84856455547 (DOI: 10.1299/kikaic.77.1161, CiNii: 1390282681363332608, Elsevier: Scopus)
50.	Toshihide Horikawa, Sekida Tomoki, Hayashi Jun'ichi, Masahiro Katoh and Do D. Duong : A new adsorption-desorption model for water adsorption in porous carbons, Carbon, Vol.49, No.2, 416-424, 2011. (Link to Publication Site) ● Publication site (DOI): 10.1016/j.carbon.2010.09.038 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1016/j.carbon.2010.09.038 (DOI: 10.1016/j.carbon.2010.09.038)
51.	Masahiro Katoh, Koichi Chohama, Etsumi Sakata, Toshihide Horikawa and Tahei Tomida : XPS Study of the Influence of CO₂ on H₂ Flux through a Composite Membrane Made of Palladium and Porous Stainless Steel, Journal of Chemical Engineering of Japan, Vol.43, No.9, 745-750, 2010. (Summary) Plating a Pd membrane on the outer surface of a porous stainless steel (PSS) tube facilitates rapid H2 permeation with an absolute selectivity; the permeation is based on the solution-diffusion transport mechanism. Reforming of carbon hydride is a well-known method of manufacturing H2. CH4 dry reforming is performed in a membrane reactor using a thin Pd membrane. In this reaction, chemisorbed CO2 is known to affect H2 permeation behavior. The effect on H2 permeation and membrane stability were investigated by performing a permeation test and by XPS. After H2 was permeated through the Pd membrane, CO2 was flowed over the membrane for 1 h, and H2 was once again permeated through the membrane. In the experiment, the temperatures were 623, 723, and 823 K, the differential pressure was 0.1 MPa, and the feed rate was 10 mL/min. CO2 was replaced by He and the experiment was performed under the same conditions. After the second H2 permeation, the H2 flux increased with the time and attained its original value. The time required to attain the original value was dependent on the gas and the temperature. In the case of the He flow, the time required was only 5 min and was independent of the temperature. On the other hands, in the case of the CO2 flow, the required times were 10 min and 25 min at 623 K and 723 K or 823 K, respectively. After the CO2 flow, the XPS spectra of the surface of the Pd membrane were measured. The spectra showed that PdO was formed on the Pd membrane by oxidation of the Pd surface. The PdO was formed by chemisorbed CO2, and the H2 permeability was degraded by PdO; however, PdO was easily reduced to Pd by the H2 flow. When the experiment involving CH4 dry reforming was performed in the Pd membrane reactor with conventional Pt-based catalysts and a sweep gas for 12 h at 873 K, the H2 flux, H2 selectivity, and H2 recovery were ca. 6 mL/min, 98% (calculated by excluding the sweep gas), and 80%, respectively. (Keyword) XPS Spectra / CO 2 / Pd Membrane / H 2 Flux / Surface Oxidation (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.09we213 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390001204568720896 ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.09we213 (DOI: 10.1252/jcej.09we213, CiNii: 1390001204568720896)
52.	Tatsuya Yamazaki, Naoko Kikuchi, Masahiro Katoh, Toyoko Hirose, Hiroaki Saito, Takushi Yoshikawa and Mamoru Wada : Behavior of steam reforming reaction for bio-ethanol over Pt/ZrO2 catalysts, Applied Catalysis B: Environmental, Vol.99, No.1-2, 81-88, 2010. (Link to Publication Site) ● Publication site (DOI): 10.1016/j.apcatb.2010.06.003 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1016/j.apcatb.2010.06.003 (DOI: 10.1016/j.apcatb.2010.06.003)
53.	Daisuke Yonekura, Masaya Takahashi, Ri-ichi Murakami, Masahiro Katoh and Kenji Ohnishi : Influence of Surface Polishing of Steel Plate on Adhesion/Heap Behaviour of Silica Powder, Transactions of The Japan Society of Mechanical Engineers, Series C, Vol.76, No.767, 1838-1843, 2010. (Summary) In this paper, we examined the relationship between surface roughness and particle adhesion behavior by a proposed experiment. Five kinds of SiO_2 spherical powders (powder diameter: 0.2, 0.5, 1.0, 1.5 and 2.0μm) and stainless steel plates with seven kinds of surface roughness were used for the invetigation. The effect of humidity, electrostatic force and van der Waals force on the particle-steel adhesion behavior was also examined. The experimental results showed that van der Waals force was relatively important to the adhesion behavior compared with two other effects. The adhesion ratios of SiO_2 powders to polished stainless steel plates were measured. The adhesion ratios depend on the surface roughness and the particle diameters. The adhered particles on the steel plate were observed by SEM in order to examine the adhesion mechanism of SiO_2 particle on the polished stainless plate substrate. As the result, 0.4-1.0μm particles were easy to adhere independent of surface roughness and nominal powder diameter. The result indicates that adhesion behavior of powder depends on the adhesion force of 0.4-1.0μm particles that are changed by the surface roughness of the steel plate. (Keyword) Adhesion Force / Silica Powder / Stoppage / Hopper / Surface Treatment / Surface Roughness / Polishing (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390001206385793408 ● Summary page in Scopus @ Elsevier: 2-s2.0-77957298835 (CiNii: 1390001206385793408, Elsevier: Scopus)
54.	Masahiro Katoh, Akihiro Imayama, Narisuke Mori, Toshihide Horikawa and Tahei Tomida : Photocatalytic activity of nitrogen and fluorine co-doped titanium dioxide prepared using of various pH solutions, International Journal of Modern Physics B, Vol.24, No.15-16, 3242-3247, 2010. (Link to Publication Site) ● Publication site (DOI): 10.1142/S0217979210066392 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1142/S0217979210066392 (DOI: 10.1142/S0217979210066392)
55.	Masahiro Katoh, Katsunori Nishihara, Koji Kinouchi, Koichi Chohama, Toshihide Horikawa, Tahei Tomida and Ken-Ichiro Sotowa : The effect of carbon monoxide on the hydrogen permeability of a palladium membrane, International Journal of Modern Physics B, Vol.24, No.15-16, 2833-2837, 2010. (Link to Publication Site) ● Publication site (DOI): 10.1142/S0217979210065714 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1142/S0217979210065714 (DOI: 10.1142/S0217979210065714)
56.	Toshihide Horikawa, Yoshiyuki Kitakaze, Tomoki Sekida, Jun'ichi Hayashi and Masahiro Katoh : Characteristics and humidity control capacity of activated carbon from bamboo, Bioresource Technology, Vol.101, No.11, 3964-3969, 2010. (Summary) Activated carbons were prepared from bamboo by chemical activation with K2CO3 or physical activation with CO2. The structural and surface chemical characteristics of the activated carbons were determined by N2 adsorption-desorption and Boehm titration, respectively. The water vapor adsorption properties of the activated carbons with various pore structures (preparation conditions) were examined. The relationship between water vapor adsorption capacity and pore properties, and the humidity control capacity of the prepared activated carbons are also discussed. The water adsorption isotherms show a region of rapidly increasing uptake of water vapor, and the relative humidity corresponding to those regions was different according to the preparation conditions, especially activation temperature. Water vapor adsorption capacity was improved with larger pore volume and surface area, but the humidity control capacity in a certain specific humidity region differed greatly according to the relative humidity corresponding to the steeply rising regions of the isotherms. In the typical operating conditions of an adsorption heat pump, RH 10-35%, the bamboo-sourced activated carbon that was prepared at 873K by potassium carbonate activation with impregnation ratio 1.0 had the highest humidity control capacity. (Keyword) Adsorption / Carbon / Humidity / Poaceae / Pressure / Temperature (Link to Publication Site) ● Publication site (DOI): 10.1016/j.biortech.2010.01.032 (Link to Search Site for Scientific Articles) ● PubMed @ National Institutes of Health, US National Library of Medicine (PMID): 20133125 ● Search Scopus @ Elsevier (PMID): 20133125 ● Search Scopus @ Elsevier (DOI): 10.1016/j.biortech.2010.01.032 (DOI: 10.1016/j.biortech.2010.01.032, PubMed: 20133125)
57.	Tatsuya Yamazaki, Naoko Kikuchi, Masahiro Katoh, Yoshie Okada, Takushi Yoshikawa and Mamoru Wada : Synthesis of light olefins from bio-ethanol over Ni-MFI catalysts, Journal of the Japan Petroleum Institute, Vol.52, No.5, 239-247, 2009. (Summary) The effects of Ni addition on the catalytic activity of MFI zeolite catalysts were examined with the ethanol conversion reaction under high space velocity conditions, using pure ethanol, ethanol diluted with water, and bioethanol produced from corn, and the effects of impurities on deactivation were evaluated. Addition of Ni to MFI zeolite strongly suppressed the formation of aromatic compounds, and greatly improved the selectivities for C3 and C4 olefins from pure ethanol, but decreased the selectivities for C3 and C4 olefins, and slightly reduced the suppression effect of the Ni site for aromatic formation from bioethanol. The yields of C3 and C4 olefins decreased with time-on-stream despite the presence of the Ni sites. XPS analysis of the catalysts after reaction at 673 K showed presence of oxidized carbon species, indicating the deposit of the impurity from the bioethanol. In addition, the electronic state of Ni after the reaction of bioethanol was also different to that after the reaction of reagent ethanol. XPS analysis showed the formation of Ni2O3 species or nickel sulfate during the reaction of bioethanol, which caused catalyst deactivation. In the reaction at 773 K, a large amount of filament carbon was deposited on the catalyst surface. These factors caused significant decreases in the formation of C3 and C4 olefins in the conversion of bioethanol. (Keyword) Nickel catalyst / MFI zeolite catalyst / Bioethanol / Olefin synthesis / Deactivation (Link to Publication Site) ● Publication site (DOI): 10.1627/jpi.52.239 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282680165651200 ● Search Scopus @ Elsevier (DOI): 10.1627/jpi.52.239 (DOI: 10.1627/jpi.52.239, CiNii: 1390282680165651200)
58.	Yoshinori Hama, Masakazu Itamochi, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : Performance of a bench scale annular type packed bed photocatalytic reactor for decomposition of indigo carmine dissolved in water, Journal of Chemical Engineering of Japan, Vol.42, No.7, 502-507, 2009. (Summary) A bench-scale annular-type packed-bed photocatalytic reactor with TiO2-coated glass beads as the photocatalyst was designed; the performance of the reactor was evaluated by using it for the photocatalytic decomposition of indigo carmine (IC) dissolved in water. The reactor was operated in a recirculation batch mode, and the dye solution in the reservoir was recirculated through the photocatalyst bed in the annular space of the reactor. The concentration of the dye in the reservoir decreased gradually with an increase in the operation time. The time course of the change in the IC concentration was calculated numerically by assuming first-order kinetics, and the overall rate constant of photocatalytic decomposition was determined by fitting the calculated time course to the experimental value obtained for various treatment times. The overall decomposition rate constants decreased with an increase in the initial concentration of the IC solution. The rate-controlling step in the photocatalytic decomposition was the mass transfer of IC from the bulk of the solution to the catalyst surface when the flow rate was less than 1 dm3/min; however, when the flow rate exceeded the transition flow rate, the reaction occurring at the catalyst surface was the rate-controlling step. (Keyword) Packed-Bed Photocatalytic Reactor / Bench-Scale / Annular-Type / TiO 2-Coated Glass Beads / Indigo Carmine (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.08we289 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390001204569378560 ● Search Scopus @ Elsevier (DOI): 10.1252/jcej.08we289 (DOI: 10.1252/jcej.08we289, CiNii: 1390001204569378560)
59.	伊藤信成, Masahiro Katoh and 岡野伸章 : 水分子吸着による人工衛星光学硝材の透過率変動計測, Journal of the Japan Society for Aeronautical and Space Sciences, Vol.57, No.660, 18-24, 2009. (Summary) Gas adsorption onto optical surfaces equipped in satellites is one of the causes of signal degradation occurred in orbit and water is one of the most potent ad-molecules. To estimate the degradation caused by water adsorption onto optical glass surface, the transmittance measurements were carried out in UV-VIS (200--800nm) and IR (1.7--20μm) wavelength ranges. Five kinds of glasses, SiO2, BK7, Al2O3, CaF2, and ZnSe, which are typically used for satellite optics, were selected as glass samples. In IR wavelength range, a local absorption feature was appeared at λ=3.1μm when a glass temperature was below 200K. The phase change of adsorbed water from vapor to solid may account for the newly appeared absorption. In UV-VIS region, there was no local absorption feature but broad transmittance decrease. BK7 and ZnSe, which are hydrophobic, showed little transmittance decrease and it was hard to find the wavelength dependence for their transmittance spectra. On the other hand, the transmittance spectra of hydrophilic glasses, SiO2, Al2O3, and CaF2, showed wavelength dependence and had the local minimal value. From our computation, it is found that the growth of ice grains on a glass surface makes it possible to reproduct the spectral transmittance degradation detected for hydrophilic glasses. (Keyword) Artificial Satellite / artificial satellite / Remote Sensing / remote sensing / Degradation / degradation / Water Vapor / water vapor / Transmittance / transmittance (Link to Publication Site) ● Publication site (DOI): 10.2322/jjsass.57.18 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282679445040000 ● Search Scopus @ Elsevier (DOI): 10.2322/jjsass.57.18 (DOI: 10.2322/jjsass.57.18, CiNii: 1390282679445040000)
60.	Mohamed Reda Berber, Keiji Minagawa, Masahiro Katoh, Takeshi Mori and Masami Tanaka : Nanocomposites of 2-arylpropionic acid drugs based on Mg-Al layered double hydroxide for dissolution enhancement, European Journal of Pharmaceutical Sciences, Vol.35, No.4, 354-360, 2008. (Summary) Naproxen (NP) and flurpibrofen (FB) as non-steroidal anti-inflammatory drugs (NSAIDs) of 2-arylpropionic acid derivatives have been used as host organic drugs to be intercalated into layered double hydroxide (LDH) applying reconstruction and co-precipitation techniques. The obtained NP LDH and FB LDH nanocomposites were characterized by X-ray powder diffraction, infrared and thermogravimetric analyses. From drug loading, thermal analysis and X-ray measurements we can decide that coprecipitaion technique is better than reconstruction technique to obtain intercalated monophase nanocomposites. In acidic medium LDH dissolved and the intercalated drug starts to release in a molecular form which is suitable for adsorption. The drug solubility has been investigated before and after intercalation. It has been found that LDH improves the drug solubility and its dissolution rate. (Keyword) Aluminum Hydroxide / Anti-Inflammatory Agents, Non-Steroidal / Chemistry, Pharmaceutical / Differential Thermal Analysis / Excipients / Flurbiprofen / L-Lactate Dehydrogenase / Magnesium Hydroxide / Nanoparticles / Naproxen / Solubility / Spectrophotometry, Infrared / X-Ray Diffraction (Link to Publication Site) ● Publication site (DOI): 10.1016/j.ejps.2008.08.006 (Link to Search Site for Scientific Articles) ● PubMed @ National Institutes of Health, US National Library of Medicine (PMID): 18789388 ● Search Scopus @ Elsevier (PMID): 18789388 ● Search Scopus @ Elsevier (DOI): 10.1016/j.ejps.2008.08.006 (DOI: 10.1016/j.ejps.2008.08.006, PubMed: 18789388)
61.	伊藤信成, Masahiro Katoh and 岡野伸章 : Effect of Organic Contaminants on Satellite Optics Transmittance Variation due to the Adsorption of Organic Molecules on Optical Glass Surfaces, Transactions of the Society of Instrument and Control Engineers, Vol.44, No.6, 474-482, 2008. (Keyword) degradation / transmittance / adsorption / organic gas / sensor (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282679479368064 (CiNii: 1390282679479368064)
62.	Kinji Jim, Yu Nagaoka, Kazuomi Nishi, Kinuyo Ogawa, Shoji Nagahata, Toshihide Horikawa, Masahiro Katoh, Tahei Tomida and Jun'ichi Hayashi : Adsorption properties and photocatalytic activity of TiO2 and La-doped TiO2, Adsorption, Vol.14, No.2, 257-263, 2008. (Keyword) adsorption / photocatalytic activity-TiO2 / La doping / methylene blue degradation / TITANIUM-DIOXIDE PHOTOCATALYSTS / VISIBLE-LIGHT IRRADIATION / ENHANCED DEGRADATION / DECOMPOSITION / ACID (Link to Publication Site) ● Publication site (DOI): 10.1007/s10450-007-9095-4 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1007/s10450-007-9095-4 (DOI: 10.1007/s10450-007-9095-4)
63.	Masahiro Katoh, Tatsuya Yamazaki, Naoko Ishikawa, Yoshie Okada, Takushi Yoshikawa and Mamoru Wada : Conversion of Bio-ethanol into Hydrocarbons over HZSM-5 catalyst, Kagaku Kogaku Ronbunshu, Vol.34, No.3, 396-401, 2008. (Summary) The conversion of bio-ethanol (ethanol: 77.4%, water: 19.6% and trace) derived from corn into hydrocarbons over HZSM-5 zeolites was studied. The reaction behaviors for formation of gaseous olefins and aromatics at WHSV=26 h-1 at 573 773 K were discussed by comparing with those of pure ethanol and 80% ethanol aqueous solution. The main products in the bio-ethanol conversion were ethylene or diethyl ether, and C3 C5 hydrocarbons and aromatics were also produced. The selectivity of olefins formation in C3 C4 hydrocarbons was depends on the reaction temperature. The yields of C3 C4 olefins increase with the rise of reaction temperature. The formation of them from bio-ethanol needs higher temperature than that from ethanol, and the decline of activity for bio-ethanol conversion was observed faster than that for a pure ethanol and an ethanol/water solution. The reason was explained by the strong acid site of HZSM-5 was poisoned by impurities in bio-ethanol such as sulfur. The content of aromatics was the largest at 648 K, but it decreased at 673 K. The order of amounts of aromatics produced were from pure ethanol>bio-ethanol>ethanol/water solution. The coexistence of water depressed the amount of aromatics, but the active sites changed by impurities in bio-ethanol promoted the formation of aromatics. (Keyword) Bio-ethanol Utilization / HZSM-5 Catalyst / Formation of Olefins / Oligomerization of Ethanol / Bio-ethanol Utilization / HZSM-5 Catalyst / Formation of Olefins / Oligomerization of Ethanol (Link to Publication Site) ● Publication site (DOI): 10.1252/kakoronbunshu.34.396 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390001204509660672 ● Search Scopus @ Elsevier (DOI): 10.1252/kakoronbunshu.34.396 (DOI: 10.1252/kakoronbunshu.34.396, CiNii: 1390001204509660672)
64.	Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : Preparation and characterization of nitrogen-doped mesoporous titania with high specific surface area, Microporous and Mesoporous Materials, Vol.110, No.2-3, 397-404, 2008. (Link to Publication Site) ● Publication site (DOI): 10.1016/j.micromeso.2007.06.048 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1016/j.micromeso.2007.06.048 (DOI: 10.1016/j.micromeso.2007.06.048)
65.	Nobunari Itoh, Masahiro Katoh and Nobuaki Okano : Development of Transmittance Variation Measurements Systems Owing to Molecular Adsorption, Journal of the Remote Sensing Society of Japan, Vol.26, No.5, 384-390, 2006. (Keyword) transmittance / molecular adsorption / contamination / on-board calibration (Link to Publication Site) ● Publication site (DOI): 10.11440/rssj1981.26.384 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1520853833658303232 ● Search Scopus @ Elsevier (DOI): 10.11440/rssj1981.26.384 (DOI: 10.11440/rssj1981.26.384, CiNii: 1520853833658303232)
66.	Masahiro Katoh, Akira Sondoh, Toshihide Horikawa and Tahei Tomida : Characterization of Palladium and Palladium-Silver Alloy Layers on Stainless Steel Support, International Journal of Modern Physics B, Vol.20, No.25-27, 3866-3871, 2006. (Link to Publication Site) ● Publication site (DOI): 10.1142/S0217979206040507 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-33751270188 (DOI: 10.1142/S0217979206040507, Elsevier: Scopus)
67.	Masahiro Katoh, Nobuaki Okano, Toshihide Horikawa, Tahei Tomida and Nobunari Itoh : FTIR Study on Molecular Contamination on Surface of Optical Materials, International Journal of Modern Physics B, Vol.20, No.25-27, 3860-3865, 2006. (Link to Publication Site) ● Publication site (DOI): 10.1142/S0217979206040490 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-33751275527 (DOI: 10.1142/S0217979206040490, Elsevier: Scopus)
68.	Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : Photocatalytic Reaction of Acetone on Mesoporous Chromium Silicate, International Journal of Modern Physics B, Vol.20, No.25-27, 3854-3859, 2006. (Link to Publication Site) ● Publication site (DOI): 10.1142/S0217979206040489 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-33751300306 (DOI: 10.1142/S0217979206040489, Elsevier: Scopus)
69.	Kei-ichiro Murai, Yuichiro Murakai, Tomoko Sei, Masahiro Katoh, Ichiro Nakabayashi, Toshihiro Moriga, Suminori Tanaka, Yoshiyuki Kidoguchi and Kei Miwa : Total Oxidation of Activated Carbon over PdO-CeO₂/TiO₂-Al₂O₃ Catalyst, International Journal of Modern Physics B, Vol.20, No.25-27, 3920-3925, 2006. (Link to Publication Site) ● Publication site (DOI): 10.1142/S0217979206040593 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-33751300538 (DOI: 10.1142/S0217979206040593, Elsevier: Scopus)
70.	Masahiro Katoh, Hironori Aihara, Toshihide Horikawa and Tahei Tomida : Spectroscopic study for photocatalytic decomposition of organic compounds on titanium dioxide containing sulfur under visible light irradiation, Journal of Colloid and Interface Science, Vol.298, No.2, 805-809, 2006. (Summary) Yellowish S-containing TiO2 (S-TiO2) powders were prepared by calcination of a mixture of titanium(III) chloride and ammonium thiocyanate solutions. Three kinds of S-TiO2 were prepared by varying the concentration of ammonium thiocyanate (0.5, 1 or 13 M). X-ray photoelectron spectroscopy spectra of the S-TiO2 showed that sulfur atoms existed on the surface of TiO2 powders. But the peaks assigned to S disappeared after Ar+ etching, which means that these atoms were not doped in the bulk of the TiO2 powders. While UV-visible absorption spectra of S-TiO2 showed that the absorption edges of these photocatalysts were seen to shift to a longer wavelength (lower band gap energy) than those of undoped rutile TiO2 prepared and commercial anatase type TiO2 (ST-01). The S-TiO2 (1 M) exhibited higher photocatalytic activity than ST-01 for degradation of methylene blue in aqueous solution under visible light irradiation (lambda > 400 nm). It was also confirmed by IR spectroscopy that acetaldehyde in oxygen under visible light irradiation (lambda > 400 nm) was decomposed to acetic acid by the S-TiO2 and ST-01 at the first decomposition step. (Link to Publication Site) ● Publication site (DOI): 10.1016/j.jcis.2006.01.023 (Link to Search Site for Scientific Articles) ● PubMed @ National Institutes of Health, US National Library of Medicine (PMID): 16527296 ● Search Scopus @ Elsevier (PMID): 16527296 ● Search Scopus @ Elsevier (DOI): 10.1016/j.jcis.2006.01.023 (DOI: 10.1016/j.jcis.2006.01.023, PubMed: 16527296)
71.	Tahei Tomida, Naoyuki Okada, Masahiro Katoh and Shigekazu Katoh : Adsorption and Photocatalytic Decomposition of Volatile Organic Compounds on Photocatalyst of TiO₂-silica beads, Adsorption, Vol.11, No.Supplement 1, 865-869, 2005. (Link to Publication Site) ● Publication site (DOI): 10.1007/s10450-005-6037-x (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1007/s10450-005-6037-x (DOI: 10.1007/s10450-005-6037-x)
72.	Masahiro Katoh, Tahei Tomida, Manabu Shinkawa and Hironori Aihara : Adsorption Properties of Nitrogen, Carbon Dioxide and Nitorgen Dioxide onto Mesoporous Chromium Silicate, Adsorption, Vol.11, No.S1, 223-226, 2005. (Link to Publication Site) ● Publication site (DOI): 10.1007/s10450-005-5927-2 (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1007/s10450-005-5927-2 (DOI: 10.1007/s10450-005-5927-2)
73.	Suminori Tanaka, Kazunori Nakagawa, Eiji Kanezaki, Masahiro Katoh, Kei-ichiro Murai, Toshihiro Moriga, Ichiro Nakabayashi, Shigeru Sugiyama, Yoshiyuki Kidoguchi and Kei Miwa : Catalytic Activity of Iron Oxides Supported on γ-Al₂O₃ for Methane Oxidation, Journal of the Japan Petroleum Institute, Vol.48, No.4, 223-228, 2005. (Summary) Three kinds of catalysts of goethites supported on γ-Al2O3 (Fe/γ-Al2O3), SiO2-Al2O3 (Fe/SiO2-Al2O3) and SiO2 (Fe/SiO2) were investigated in terms of the catalytic activity of methane oxidation. The specific surface areas of these catalysts were larger in common than the area of goethite with no supports. The Fe/γ-Al2O3 catalyst has the highest performance in the low-temperature activity of methane oxidation which started at 623 K and completed at 923 K. When the Fe-content in Fe/γ-Al2O3 was increased, the formation of goethite was observed by the X-ray analyses and the activity of this catalyst increased up to 6 mol%. After the catalytic methane oxidation at 823 K, it was observed that goethite in Fe/γ-Al2O3 transformed to hematite which has been known as an active iron oxide in methane oxidation. The activity of Fe/γ-Al2O3 was enhanced by the addition of sodium up to the Na-content of 5 mol% although it descended above the content due to the decrease of the specific surface area of the catalyst. (Keyword) Iron oxide catalyst / Goethite / Hematite catalyst / Alumina support / Methane oxidation / Combustion catalyst (Link to Publication Site) ● Publication site (DOI): 10.1627/jpi.48.223 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282680167790848 ● Search Scopus @ Elsevier (DOI): 10.1627/jpi.48.223 (DOI: 10.1627/jpi.48.223, CiNii: 1390282680167790848)
74.	Masahiro Katoh, Manabu Shinkawa and Tahei Tomida : Adsorption Properties of Gases onto Mesoporous Chromium Silicate, Journal of Colloid and Interface Science, Vol.277, No.2, 280-284, 2004. (Summary) クロムを含有するメソポーラスシリカ(Cr-FSM-16)のガス吸着特性を検討した．珪素とクロムの比(Si/Cr比)が170と390のCr-FSM-16は，クロムを含まないFSM-16と細孔径は変わらなかったが，比表面積が2/3程度に減少した．窒素のCr-FSM-16への初期吸着熱はFSM-16にくらべ大きくなったが，二酸化炭素のCr-FSM-16への初期吸着熱はFSM-16にくらべ小さくなった．また，Cr-FSM-16は，光を照射しない条件下でも二酸化窒素を分解することがわかった． (Keyword) Adsorption / Chromium / Gases / Nanostructures / Porosity / Silicates / Surface Properties (Link to Publication Site) ● Publication site (DOI): 10.1016/j.jcis.2004.04.067 (Link to Search Site for Scientific Articles) ● PubMed @ National Institutes of Health, US National Library of Medicine (PMID): 15341836 ● Search Scopus @ Elsevier (PMID): 15341836 ● Search Scopus @ Elsevier (DOI): 10.1016/j.jcis.2004.04.067 (DOI: 10.1016/j.jcis.2004.04.067, PubMed: 15341836)
75.	Eiji Kanezaki, Suminori Tanaka, Kei-ichiro Murai, Toshihiro Moriga, Junko Motonaka, Masahiro Katoh and Ichiro Nakabayashi : Direct Detection of a Phase Change in PdO/CeO₂ Supported on χ-Al₂O₃ by means of in situ High-Temperature Measurements of XRD and FTIR, Analytical Sciences, Vol.20, No.7, 1069-1073, 2004. (Summary) 本論文では，メタン酸化反応におけるc-Al2O3担持PdO/CeO2触媒でのPdOからPdへの変化をXRD及びFT-IRの高温その場測定により直接に観測した．この変化は雰囲気中の酸素分圧変化に対して可逆的であり，この変化がメタン酸化における触媒作用の本質であると結論した．この結論はこれ迄の研究結果をよく説明するものである (Link to Publication Site) ● Publication site (DOI): 10.2116/analsci.20.1069 (Link to Search Site for Scientific Articles) ● PubMed @ National Institutes of Health, US National Library of Medicine (PMID): 15293404 ● CiNii @ National Institute of Informatics (CRID): 1520290883444216064 ● Search Scopus @ Elsevier (PMID): 15293404 ● Search Scopus @ Elsevier (DOI): 10.2116/analsci.20.1069 (DOI: 10.2116/analsci.20.1069, PubMed: 15293404, CiNii: 1520290883444216064)
76.	Masanao Orihara, Suminori Tanaka, Kazunori Nakagawa, Shigeo Kawakami, Masahiro Katoh, Shigeru Sugiyama, Toshihiro Moriga and Ichiro Nakabayashi : Effects of Sulfate Ion on Crystal Structure and Activity for Methane Oxidation of Iron Oxide Prepared from Goethite, Nippon Kagaku Kaishi, Vol.2002, No.1, 11-18, 2002. (Summary) ゲータイトを前駆体として合成した酸化鉄を用いてメタン酸化活性試験を行った．酸化鉄によるメタン酸化活性は硫酸イオンの存在で抑制されることを明らかにした．この活性の低下は鉄原子に電子を供与して鉄の酸化力を減少させることにより引き起こされるが，同時に硫酸イオンは酸化鉄中に多くの酸素欠陥を酸化鉄格子中に導入するので，硫酸イオンが脱離するような550℃以上の高温では逆に活性が向上することを見いだした． (Link to Publication Site) ● Publication site (DOI): 10.1246/nikkashi.2002.11 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1520290883268352000 ● Summary page in Scopus @ Elsevier: 2-s2.0-2542459427 (DOI: 10.1246/nikkashi.2002.11, CiNii: 1520290883268352000, Elsevier: Scopus)
77.	Masahiro Katoh, Junji Kataoka, Yoshinori Maegawa and Tahei Tomida : The Control of Pore Structure and Adsorption Characteristicsof Mesoporous Silicas, Kagaku Kogaku Ronbunshu, Vol.27, No.6, 719-723, 2001. (Summary) To modify the adsorption characteristics of the mesoporous silica FSM-16, Al-incorporated FSM-16 (Al-FSM-16) and trimethylsilylated FSM-16 (TMS-FSM-16) were prepared. The pore structureand the adsorption characteristics of these modified mesoporous materials were examined by usingprobe molecules of N2 and CO<sub>2</sub>. BET surface area of Al-FSM-16 was reduced to 470 m<sup>2</sup>·g<sup>-1</sup>, about one-half of the surface area of FSM-16. However, the separation factor for CO2 from CO<sub>2</sub>-N<sub>2</sub> gas mixtures (CO<sub>2</sub>/N<sub>2</sub>=20.1/79.9) on Al-FSM-16 was higher than on FSM-16 in the total pressure range from 0.2 to 0.3 MPa. This implies that CO<sub>2</sub> is adsorbed selectively to Na+, which is present to compensate for thenegative charge generated by incorporating Al in the framework of the mesoporous silicas. By trimethyl-silylation of FSM-16, 82% of the surface area was covered with trimethylsilyl (TMS) groups, and thepore size decreased to 2.3 nm from the 2.8 nm of FSM-16. Much less CO2 was adsorbed on TMS-FSM-16 than that on FSM-16, possibly due to the smaller amount of free SiOH groups of TMS-FSM-16. (Keyword) mesoporous silica / modification / pore structure / adsorption characteristic (Link to Publication Site) ● Publication site (DOI): 10.1252/kakoronbunshu.27.719 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390282679485317632 ● Summary page in Scopus @ Elsevier: 2-s2.0-24044497272 (DOI: 10.1252/kakoronbunshu.27.719, CiNii: 1390282679485317632, Elsevier: Scopus)
78.	Masahiro Katoh, Hitoshi Takao, Naoto Abe and Tahei Tomida : Adsorption Selectivity of FSM-16 for Several Organic Compounds, Journal of Colloid and Interface Science, Vol.242, No.2, 294-299, 2001. (Summary) メソ多孔性シリカであるFSM-16を調製し，数種の有機化合物(p-ニトロフェノール，トルエン，n-ヘプタン，ベンゼン，シクロヘキサン，o-ジクロロベンゼン)の吸着選択性を検討した．水溶液中のp-ニトロフェノールは，FSM-16にほとんど吸着しなかったが，n-ヘプタン中のトルエンやベンゼンはFSM-16の細孔内に吸着することがわかった．また，これらの吸着量は，市販の吸着剤(13Xゼオライトやシリカゲル)にくらべ多いこともわかった． (Link to Publication Site) ● Publication site (DOI): 10.1006/jcis.2001.7841 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-0035887681 (DOI: 10.1006/jcis.2001.7841, Elsevier: Scopus)
79.	Tahei Tomida, Kinnya Hamaguchi, Shunsuke Tsunashima, Masahiro Katoh and Seizo Masuda : Binding Properties of a Water-Soluble Chelating Polymer with Divalent Metal Ions Measured by Ultrafiltration. Poly(acrylic acid), Industrial & Engineering Chemistry Research, Vol.40, No.16, 3557-3562, 2001. (Summary) 本論文は水溶性キレートポリマーであるポリアクリル酸と二価金属イオン(Co(II), Ni(II), Cu(II), Zn(II), Pb(II))との結合平衡関係をバッチ式限外濾過法によってpH4-6の範囲で求め，錯形成モデルを提案し，提案したモデルによって結合平衡関係を良く表すことができることを示したものである．逐次錯安定度定数および平衡定数を実験値とのカーブフィティングによって求め，文献に報告されている種々の方法によって決定された錯安定度定数と比較し，提案したモデルが妥当なものであることを明らかにした．また，モデルに基づいて逐次的に生成する錯体濃度を推算して求めた平均配位数とpHの関係についても考察したものである． (Link to Publication Site) ● Publication site (DOI): 10.1021/ie0009839 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-0035827885 (DOI: 10.1021/ie0009839, Elsevier: Scopus)
80.	Masahiro Katoh, Masanao Orihara, Toshihiro Moriga, Ichiro Nakabayashi, Shigeru Sugiyama and Suminori Tanaka : In Situ XRD and In Situ IR Spectroscopic Analyses of Structural Change of Goethite in Methane Oxidation, Journal of Solid State Chemistry, Vol.156, No.1, 225-229, 2001. (Summary) 含水酸化鉄の一種であるゲータイトのメタン酸化活性について調べた．ゲータイトは針状結晶であるが，220∼230℃付近で脱水により比表面積の非常に大きい酸化鉄であるヘマタイトに相変態をすること，その比表面積の大きいヘマタイトがメタン酸化に大きく関わっていることをその場観察X線回折およびその場観察赤外分光法により明らかにした． (Link to Publication Site) ● Publication site (DOI): 10.1006/jssc.2000.8992 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-0034810637 (DOI: 10.1006/jssc.2000.8992, Elsevier: Scopus)
81.	Masahiro Katoh, Keiichi Sakamoto, Mituo Kamiyamane and Tahei Tomida : Adsorption of CO₂ on FSM-type mesoporous silicas, Physical Chemistry Chemical Physics, Vol.2, No.19, 4471-4475, 2000. (Summary) 細孔径(1.7nm:FSM-10，2.1nm:FSM-12，2.3nm:FSM-14，2.8nm:FSM-16)の異なる4種のFSMタイプのメソ多孔性シリカを調製し，二酸化炭素の吸着特性について検討した．二酸化炭素の吸着熱からFSM-10とFSM-12の吸着サイトはエネルギー的に均一であるが，FSM-14とFSM-16にはエネルギー的に異なる吸着サイトが存在することがわかった．そして，そのエネルギー的に異なる吸着サイトは，IRスペクトルで観測された自由シラノール基の存在が原因と判断した． (Link to Publication Site) ● Publication site (DOI): 10.1039/b004505p (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1572543026604215808 ● Summary page in Scopus @ Elsevier: 2-s2.0-0034287590 (DOI: 10.1039/b004505p, CiNii: 1572543026604215808, Elsevier: Scopus)
82.	Masahiro Katoh, Takushi Yoshikawa, Takao Tomonari, Kazuyuki Katayama and Tahei Tomida : Adsorption Characteristics of Ion-Exchanged ZSM-5 Zeolites for CO₂/N₂ Mixtures, Journal of Colloid and Interface Science, Vol.226, No.1, 145-150, 2000. (Summary) Adsorption characteristics of alkali metal ion-exchanged ZSM-5 zeolites, M-ZSM-5 (M=Li, Na, K, Rb, and Cs), for CO(2)/N(2) mixtures were investigated by a column method and IR study. It was shown that CO(2) was adsorbed from CO(2)/N(2) mixtures on M-ZSM-5 zeolites by two types of adsorbtion at temperatures below 333 K. One was a weak adsorption due to interaction with the wall of ZSM-5, and the other was a strong adsorption caused by interactions with the cation of ZSM-5. IR-spectra of gases adsorbed at various temperatures revealed that the CO(2) were strongly adsorbed on M-ZSM-5 in several ways, which seemed to be caused by different adsorption sites. At temperatures above 373 K, almost all CO(2) adsorbed were on cation sites, while N(2) coadsorbed with CO(2) was shown to interact with the wall of ZSM-5 under all experimental conditions. Copyright 2000 Academic Press. (Link to Publication Site) ● Publication site (DOI): 10.1006/jcis.2000.6795 (Link to Search Site for Scientific Articles) ● PubMed @ National Institutes of Health, US National Library of Medicine (PMID): 11401358 ● Summary page in Scopus @ Elsevier: 2-s2.0-0034195268 (DOI: 10.1006/jcis.2000.6795, PubMed: 11401358, Elsevier: Scopus)
83.	Masahiro Katoh, Kazuyuki Katayama and Tahei Tomida : Effect of Temperature on Air Adsorption onto Alkali Metal Ion-Exchanged ZSM-5 Zeolites, Separation Science & Technology, Vol.34, No.4, 599-608, 1999. (Summary) Na-ZSM-5から通常のイオン交換法により，アルカリ金属でイオン交換したZSM-5ゼオライトを調製し，空気の吸着能を，クロマトグラフ法によって溶出曲線を決定することにより検討した．吸着ガスとカチオンとの相互作用は吸着ガスのIRスペクトルから考察した．その結果，空気中の窒素が選択的に吸着されることがわかった．また，IRスペクトルから，空気中の窒素が優先的にカチオンサイトに吸着することが示された．
84.	Masahiro Katoh, Tatsuya Yamazaki and Sentaro Ozawa : IR Spectroscopic Study of Adsorption of Binary Gases over Ion-Exchanged ZSM-5 Zeolites, Journal of Colloid and Interface Science, Vol.203, No.2, 447-455, 1998. (Summary) アルカリ金属でイオン交換したZSM-5ゼオライトの2成分系ガス(メタン/一酸化炭素，一酸化炭素/一酸化窒素，一酸化窒素/二酸化炭素)の吸着特性をIR分光法を用いて検討した．一酸化炭素のIRバンドのプロファイルは共存ガスによって異なり，これは，吸着選択性が吸着質の極性だけでなく，異なる電場強度をもつZSM-5の細孔構造に起因する吸着サイトの性質が影響していることを示唆した．
85.	Tahei Tomida, Masahiro Katoh, Tatuya Inoue, Tadayuki Minamino and Seizo Masuda : Transient Analysis of Mass-Transfer Rate in Recovering Metal Ions Using a Microporous Hollow Fiber Membrance and a Water-Soluble Chelating Polymer, Separation Science and Technology, Vol.33, No.15, 2281-2293, 1998. (Summary) 本論文は，多孔質中空糸膜と水溶性キレートポリマーを用いて水溶液中から重金属を回収·濃縮する方法において，過渡応答法によって金属イオンの膜透過速度を求めたものである．金属イオンは水溶液側から膜の孔内を拡散して水溶性ポリマー液側に移動し，ポリマーと錯形成する．そこで，金属イオン濃度を過渡的に変えることによって，中空糸膜の中空側を流れるキレートポリマーの出口濃度を解析して金属イオンの膜透過の総括物質移動係数と混合拡散係数を決定し，水溶性キレートポリマーの中空内流速との関係を明らかにした．
86.	Masahiro Katoh, Hiroyuki Hatayama, Tatsuya Yamazaki and Sentaro Ozawa : イオン交換ZSM-5ゼオライトへのクロロジフルオロメタンの吸着, Nippon Kagaku Kaishi, Vol.1997, No.1, 24-32, 1997. (Summary) 種々のアルカリ金属イオン交換ZSM-5ゼオライトにクロロジフルオロメタンを吸着させ，その吸着特性を検討した．吸着温度273Kの条件では，クロロジフルオロメタンはZSM-5細孔内で液体に近い密度で物理吸着しているが，その吸着熱はゼオライト中のカチオン種によらず凝縮熱に比べて著しく大きく，吸着分子が細孔壁からの引力を強く受けていることが示された．しかし，吸着分子の微視的な性質はゼオライト中のカチオンの静電場の影響を強く受けていることがわかった．
87.	Tatsuya Yamazaki, Ken-ichi Honma, Masahiro Katoh and Sentaro Ozawa : Analyses of n₁-Band of Methane Adsorbed on Ion-exchanged L-Zeolites, Chemistry Letters, Vol.1996, 1101-1102, 1996. (Summary) L型ゼオライトのカチオンサイトの性質を明らかにするために，吸着したメタンのIRバンドを解析した．ピークシフトと電場強度，ピークシフトとモル吸光係数の関係は，摂動理論に基づいて解釈することができた．また，メタン吸着可能なカチオン数は，カリウムやルビジウムでイオン交換したL型ゼオライトで，ユニットセルあたり3原子と見積もられた．
88.	Masahiro Katoh, Ichiro Sawayama, Tatsuya Yamazaki and Sentaro Ozawa : アルカリ金属イオン交換ZSM-5ゼオライトへの二酸化硫黄の吸着, Nippon Kagaku Kaishi, Vol.1995, No.3, 177-183, 1995. (Summary) 種々のアルカリ金属イオンでイオン交換したZSM-5に二酸化硫黄を吸着させ，吸着量測定および種々の分光学的測定(IR，XPS，XRF)と吸着相互作用ポテンシャルの理論計算を行い，吸着状態の解明を行った．理論計算結果は物理吸着した二酸化硫黄に二つの安定な吸着構造が存在することを示唆し，IR測定によってその存在が確認された．
89.	Masahiro Katoh, Tatsuya Yamazaki, Hiroshi Kamijo and Sentaro Ozawa : Infrared studies on nitrogen oxides adsorbed on alkali metal ion-exchanged ZSM-5 zeolites, Zeolites, Vol.15, No.7, 591-596, 1995. (Summary) アルカリ金属イオンでイオン交換したZSM-5ゼオライトへの種々の窒素酸化物の226Kでの吸着特性を赤外分光法で検討した．一酸化窒素の分圧が低い条件では，一酸化窒素は直線的にZSM-5のカチオンサイトに吸着するが，分圧の増加にともない，不均化が起こり，一酸化二窒素や三酸化二窒素が生成することがわかった． (Link to Publication Site) ● Publication site (DOI): 10.1016/0144-2449(95)00068-H (Link to Search Site for Scientific Articles) ● Search Scopus @ Elsevier (DOI): 10.1016/0144-2449(95)00068-H (DOI: 10.1016/0144-2449(95)00068-H)
90.	Masahiro Katoh, Tatsuya Yamazaki and Sentaro Ozawa : IR Spectra for Adsorbed CO on Various Alkali Metal Ion-Exchanged ZSM-5 Zeolites, Bulletin of the Chemical Society of Japan, Vol.67, No.5, 1246-1253, 1994. (Summary) アルカリ金属イオンでイオン交換したZSM-5ゼオライトへ一酸化炭素を吸着させ，その状態を赤外分光法により測定し，吸着した一酸化炭素のピーク位置や強度の温度による影響を考察した．IRスペクトルから，物理吸着した一酸化炭素はカチオンに直線的に配向しており，弱く吸着している一酸化炭素はZSM-5の細孔壁と相互作用していることがわかった．
91.	Tatsuya Yamazaki, Masahiro Katoh, Sentaro Ozawa and Yoshisada Ogino : Adsorption of CO₂ over univalent cation-exchanged ZSM-5 zeolites, Molecular Physics, Vol.80, No.2, 313-324, 1993. (Summary) 二酸化炭素をアルカリ金属イオンでイオン交換したZSM-5に吸着させ，その吸着量とIRスペクトルを測定した．観測された吸着特性は，物理吸着を仮定した理論計算とよく一致し，化学吸着は全吸着の10%以下であった．二酸化炭素はカチオンと細孔壁の両方と相互作用したが，カチオンと相互作用した二酸化炭素のみが赤外不活性な二酸化炭素の吸収を活性にすることがわかった．

Academic Paper (Unrefereed Paper):

1.	Shigeru Sugiyama, Yuya Nagai, Naotaka Sakamoto, Naotaka Ohtake and Masahiro Katoh : Synthesis of Versatile Chemicals through Oxidative Dehydrogenation on Solid Catalysts of Non-Petroleum Resource, Bulletin of Institute of Technology and Science, The University of Tokushima, No.61, 1-5, 2016. (Summary) To prepare 1,3-butadiene, one of versatile chemicals, from 1-butene, one of the main components in liquefied petroleum gas (LPG), the oxidative dehydrogenation of 1-butene on -Bi2Mo3O12 doped with cerium was examined. Regardless to the doped amount of cerium, the conversion of 1-butene was constant while the selectivity to 1,3-butadiene decreased with the doped amount of cerium, while the selectivities to 2-butenes, CO and CO2 increased. It is concluded that the introduction of cerium into -Bi2Mo3O12 resulted in the enhancement of the greater acidic nature of the catalyst while the mild acidic nature of the catalyst seems to be suitable for the effective synthesis of 1,3-butadiene from 1-butene via the oxidative dehydrogenation. (Tokushima University Institutional Repository) ● Metadata: 111039 (Tokushima University Institutional Repository: 111039)
2.	Ichiro Nakabayashi, Toshihiro Moriga, Kei-ichiro Murai, Shigeru Sugiyama, Hiromu Hayashi, Masahiro Katoh, Tahei Tomida, Chiya Numako and Hiromitsu Terao : 高酸化活性を有する酸化鉄触媒の創製と複合化による高機能化, Bulletin of Faculty of Engineering, The University of Tokushima, Vol.48, No.48, 59-67, 2003. (Keyword) Iron Oxide / Methane Oxidation / Sulfation / Lattice Distortion (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1520853831963581440 (CiNii: 1520853831963581440)

Review, Commentary:

1.	Masahiro Katoh : Boiling Heat Transfer Promotion of Water on SUS Plate Surface with Micro Polishing, Bulletin of the Society of Sea Water Science, Japan, Vol.77, No.1, 7-11, Mar. 2023. (Link to Publication Site) ● Publication site (DOI): 10.11457/swsj.77.1_7 (Link to Search Site for Scientific Articles) ● CiNii @ National Institute of Informatics (CRID): 1390297504261241216 ● Search Scopus @ Elsevier (DOI): 10.11457/swsj.77.1_7 (DOI: 10.11457/swsj.77.1_7, CiNii: 1390297504261241216)
2.	Masahiro Katoh : 巻頭言「実学に進むべし」と「瓢箪から駒」, Adsorption News, Vol.35, No.2, 2, Jul. 2021. (Tokushima University Institutional Repository) ● Metadata: 116167 (Tokushima University Institutional Repository: 116167)
3.	Masahiro Katoh : 吸着基礎シリーズ吸着状態描像へのアプローチー分光学(赤外・ラマン分光法)ー, Adsorption News, Vol.31, No.1, 16-23, May 2017.
4.	Masahiro Katoh : IR Spectroscopic Analysis of Adsorption Phenomena on Surface of Photocatalyst, Adsorption News, Vol.21, No.1, 4-9, Mar. 2007.
5.	Masahiro Katoh : ナノ多孔体に吸着した2成分気体の赤外分光分析, 表面, Vol.37, No.11, 651-658, Nov. 1999. (Summary) ナノ多孔体は，分子レベルの規則正しい細孔をもった多孔性の結晶であり，それに吸着する分子のほとんどは細孔の中に存在し，結晶内のカチオンが形成する電場の影響を受けている．本稿では，ナノ多孔体の吸着特性を赤外分光法を用いて検討した研究例に筆者らの結果をあわせて紹介した．

Proceeding of International Conference:

1.	Masahiro Katoh, Tanaka Chika, Yoshiki Inadu and Takafumi Hanada : Preparing a Dense Pd Membrane via the Vacuum-Assisted Plating of Spherical Silica Particles onto a Porous SUS Tube, AMDP2024, Tokushima, Sep. 2024.
2.	Takafumi Hanada, Schaeffer Nicolas, Masahiro Katoh, Coutinho A. P. Joao and Goto Masahiro : Designing hydrophobic deep eutectic solvents for the selective leaching of critical metals, 1st International Circular Hydrometallurgy Symposium, Sep. 2024.
3.	Takafumi Hanada, Shima Takahiro, Schaeffer Nicolas, Masahiro Katoh, Goto Masahiro and Coutinho A. P. Joao : Exploring the unique extraction behaviors of critical metals by hydrophobic eutectic solvents: comparison with diluted systems, 7th International Conference on Ionic Liquid-Based Materials, Nov. 2023.
4.	Shigeru Sugiyama, Kenta Oribe, Masahiro Katoh, Naohiro Shimoda, Yuki Kato and Wataru Ninomiya : Effect of Coking on Remarkable Enhancement of Catalytic Activity in Direct Dehydrogenation of Isobutane on Ni/Al2O3, 17th International Congress on Catalysis, San Diego, Jun. 2020.
5.	Kenta Imanishi, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Takaiku Yamamoto and Jhy-Chern Liu : Enrichment of Phosphorus from Dephosphorization Slag by Acid Leaching and Alkali Precipitation, The 6th International Forum on Advanced Technologies 2020 (IFAT2020), Tokushima, Mar. 2020.
6.	Enhong Liu, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama and Jhy-Chern Liu : Phosphorus Recovery from Chicken Manure Incineration Ash by Acid Leaching and Alkaline Precipitation, The 6th International Forum on Advanced Technologies 2020 (IFAT2020), Tokushima, Mar. 2020.
7.	Yasunori Hayashi, Ikumi Okitsu, Naohiro Shimoda, Masahiro Katoh, Toshihiro Okamoto, Shigeru Sugiyama and Wataru Ninomiya : Effect of Active Oxygen Species Generated by UV Excitation on Catalytic Oxidation of Methane, 32nd International Symposium on Chemical Engineering (ISChE2019), Daejeon, Dec. 2019.
8.	Kenta Oribe, Shino Endo, Tasyu Yoshida, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Dehydrogenation of Isobutane over Metal-supported γ-Al2O3 Catalysts, 32nd International Symposium on Chemical Engineering (ISChE2019), Daejeon, Dec. 2019.
9.	Mika Miyake, Mizuho Yoshida, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effect of Ce Addition to Bi-Mo Complex Oxide Catalyst on Partial Oxidation of Propylene to Acrolein, 32nd International Symposium on Chemical Engineering (ISChE2019), Daejeon, Dec. 2019.
10.	Yuki Kato, Shinya Nitta, Kenta Oribe, Masahiro Katoh, Wataru Ninomiya and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane to Isobutene over Mesoporous Silica Catalysts Modified with Binary Metal of Cr and Mo, The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019), Sapporo, Sep. 2019.
11.	Shigeru Sugiyama, Kenji Wakisaka, Kenta Imanishi, Masashi Kurashina, Naohiro Shimoda, Masahiro Katoh and Jhy-Chern Liu : Recovery of Phosphate Rock Equivalents from Incineration Ash of Chicken Manure by Elution-precipitation Treatment, The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019), Vol.52, No.9, 778-782, Sapporo, Sep. 2019. (Summary) In order to obtain calcium phosphates - a phosphate rock equivalent - from the incineration ash of chicken manure, which is obtained from power generation systems that use the manure for fuel, incineration ash was treated with an aqueous solution of nitric acid to elute phosphorus. By using 0.3 M of HNO3, most of the phosphorus could be eluted from 1.0 g of ash within 0.1 h. Compared with the composted chicken manure that was previously examined in our laboratory, the concentration of HNO3 was increased for this session of elution. Using the incineration ash of chicken manure made it possible to remove inorganic species at a lower boiling or sublimation temperature, and organic species by calcination in the power generation system. Compared with composted chicken manure, the concentrations of phosphorus contained in the incineration ash and the nitric acid extract were higher in the incineration ash. XRD analysis showed that the obtained nitric acid extract could be treated with aqueous NH3 to form a precipitation of poorly-crystallized calcium hydroxyapatite (Ca10(PO4)6(OH)2), which is one of main components in phosphate rock. In order to confirm the formation and purity of calcium phosphate species, the precipitation calcination was conducted at 1,078 K for 5 h. XRD revealed that the calcined solid was tricalcium phosphate, and no contamination was evident. These results reveal that a phosphate rock equivalent could be easily obtained from the incineration ash of chicken manure, which means that approximately 14% of the phosphate rock that is currently being imported into Japan could be replaced by this product. (Keyword) Incineration ash / Chicken manure / Recovery of phosphorus / Phosphate rock equivalent (Link to Publication Site) ● Publication site (DOI): 10.1252/jcej.19we030 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-85076244800 (DOI: 10.1252/jcej.19we030, Elsevier: Scopus)
12.	Yuki Nakao, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effects of Composition and Ce Addition in Bi-Mo Binary Catalysts on the Oxidation of Propylene to Acrolein, 31st International Symposium on Chemical Engineering (ISChE2018), Chiang Mai, Nov. 2018.
13.	Yasuhiro Sakuwa, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Gas-Phase Oxidative Epoxidation of Propylene to Propylene Oxide on Ag-Modified Catalysts, 31st International Symposium on Chemical Engineering (ISChE2018), Chiang Mai, Nov. 2018.
14.	Yuki Kato, Shinya Nitta, Kenta Oribe, Masahiro Katoh, Wataru Ninomiya and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane on Mesoporous Silica Catalysts Introduced with Binary Metallic Cations, 8th Tokyo Conference on Advanced Catalytic Science and Technology (TOCAT8), Yokohama, Aug. 2018.
15.	Yuki Kato, Wataru Ninomiya, Masahiro Katoh and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane on Mesoporous Silica-Based Catalysts, 25th International Symposium on Chemical Reaction Engineering, Florence, May 2018.
16.	Yuto Tsuchiya, Naozumi Fukushima, Masahiro Katoh, Yukimi Hayashi, Yuka Arai, Masamori Akamatsu and Shigeru Sugiyama : Catalytic Decomposition of Nitrite in a Continuous-Flow Reactor Using Fixed-Bed Structural Supports, 30th International Symposium on Chemical Engineering (ISChE 2017), Daejeon, Dec. 2017.
17.	Tomoyasu Ogino, Yasuhiro Sakuwa, Masahiro Katoh and Shigeru Sugiyama : Partial Oxidation of Propylene to Propylene Oxide on Various Acidic Catalysts, 30th International Symposium on Chemical Engineering (ISChE 2017), Daejeon, Dec. 2017.
18.	Shigeru Sugiyama, Hisanobu Misu, Shinya Nitta, Sho Shimazu, , Masahiro Katoh, Yuuki Katou and Wataru Ninomiya : Enhancement of Isobutene Yield in the Oxidative Dehydrogenation of Isobutane on SBA-15 Doped with a Trace Amount of Chromium, 6th Korea-Japan Symposium on Catalysis and 3rd International Symposium of Institute for Catalysis, Sapporo, May 2017.
19.	Naoto Yamada, Daiki Mine, Norimasa Yoshida, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura, and Shigeru Sugiyama : (1) Heat transfer enhancement for water flow boiling by using micro fabricated SUS plate evaporators, 29th International Symposium on Chemical Engineering (ISChE 2016), Miyazaki, Dec. 2016.
20.	Yuki Sanada, Yusuke Minato, Masahiro Katoh, and Shigeru Sugiyama : Preparation of palladium thin membrane over porous SUS tube introduced double intermediate layers with NaA zeolite and alumina, 29th International Symposium on Chemical Engineering (ISChE 2016), Miyazaki, Dec. 2016.
21.	Naotaka Ohtake, Masahiro Katoh and Shigeru Sugiyama : High Specific Surface Area Ceria Catalyzed Organic Transformation, 29th International Symposium on Chemical Engineering (ISChE 2016), Miyazaki, Dec. 2016.
22.	Takuya Ehiro, , Masahiro Katoh, Yuuki Katou, Wataru Ninomiya and Shigeru Sugiyama : Effects of Acidic-basic Properties of Calcium Hydroxyapatites on Catalytic Activities for the Oxidative Dehydrogenation of Isobutane, 9th International Symposium on Inorganic Phosphate Materials (ISIPM-9), Tokyo, Sep. 2016.
23.	Hiroharu Yamashita, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Daisuke Saeki and Hideto Matsuyama : Formation and Structural Analysis of Niobate Nanosheets with Different Sheet Thickness, The 10th Conference of Aseanian Membrane Society (AMS10), Nara, Jul. 2016.
24.	Saki Hiraoka, Naoya Motoki, Yuta Honda, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Motonari Adachi, Hiroshi Matsuo and Fumio Uchida : Preparation of Titania Thin Film for Dye-Sensitized Solar Cells using Titanium Oxide Nanosheets, The 10th Conference of Aseanian Membrane Society (AMS10), Nara, Jul. 2016.
25.	Keizo Nakagawa, Suguru Nishida, Akira Yoshida, Masahiro Katoh, Shigeru Sugiyama, Vincent Dubois and Sophie Hermans : Sintering Resistance and Cyclohexane Dehydrogenation of Pt Catalyst Covered with Cubic Mesoporous Silica Layers, The 10th Conference of Aseanian Membrane Society (AMS10), Nara, Jul. 2016.
26.	Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama and Shik Chi Edman Tsang : Single Layer Niobate Nanosheets Prepared by A Bottom-Up Approach: Photocatalytic Hydrogen Evolution from Water/Methanol Solution, The 10th Conference of Aseanian Membrane Society (AMS10), Nara, Jul. 2016.
27.	Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Wataru Ninomiya and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane on Cr-doped Calcium Hydroxyapatite and Calcium Phosphate, 28th International Symposium on Chemical Engineering (ISChE 2015), Cheju, Dec. 2015.
28.	Ayaka Satoh, Michisato Kimura, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Effects of introduced mesopores in ZSM-5 zeolites by alkali treatment on water adsorption and desorption, 27th International Symposium on Chemical Engineering (ISChE 2014), Kuala Lumpur, Dec. 2014.
29.	Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Oxidative Dehydrogenation of Isobutane on MCM-41 Modified by Metal-doping or Acid Treatment, 27th International Symposium on Chemical Engineering (ISChE 2014), Kuala Lumpur, Dec. 2014.
30.	Masahiro Katoh, Ayaka Satoh, Michisato Kimura, Keizo Nakagawa and Shigeru Sugiyama : Water Adsorption Properties of Alkali Treated ZSM-5 Zeolites, 10th International Conference on Separation Science and Technology (ICSST14), Nara, Oct. 2014.
31.	Ming Cai, Hitoshi Takagi, Antonio Norio Nakagaito, Kazuya Kusaka, Masahiro Katoh and Yang Li : Influence of alkali concentration on morphology and tensile properties of abaca fibers, Program and Abstract Book for 7th International Conference AMDP 2014, 136, Busan, Jul. 2014.
32.	Keizo Nakagawa, Takuya Ohshima, Megumi Katayama, Yoshiki Tezuka, Masahiro Katoh and Shigeru Sugiyama : Morphological effects of CeO2 nanostructures for catalytic soot combustion of CeO2 and CuO/CeO2, The 11th International Symposium on the "Scientific Bases for the Preparation of Heterogeneous Catalysts", Louvain-la-Neuve, Jul. 2014.
33.	Shigeru Sugiyama, Yasuhiro Okada, Yoshiki Yamane, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : Effects of Catalyst-molding on the Conversion of 1,2-Propandiol to Propanal on FSM-16, The Seventh Tokyo Conference on Advanced Catalytic Science and Technology (TOCAT7), Kyoto, Jun. 2014.
34.	Takuya Ohshima, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Catalytic Soot Combustion over Co3O4-CeO2 Nanorods Prepared by Surfactant Templating Method, 26th Symposium on Chemical Engineering, Busan, Dec. 2013.
35.	Tomiya Hoshinoo, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Vincent Dubois and Sophie Hermans : Effects of Mesoporous Silica Coverage of Pd/C Catalysts for Cyclohexane Dehydrogenation, 26th Symposium on Chemical Engineering, Busan, Dec. 2013.
36.	Yoshihisa Nitta, Takuya Ehiro, Ai Itagaki, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Effects of Preparation and Molding Procedures of FSM-16 Doped with Chromium on the Oxidative Dehydrogenation of Isobutane, 26th Symposium on Chemical Engineering, Busan, Dec. 2013.
37.	Ippei Shinomiya, Ryuta Kitora, Haruka Kinoshita, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Separation of Rare Earth and Phosphorus from Powders Obtained by Recovery Process of Used Fluorescent Tubes, 26th Symposium on Chemical Engineering, Busan, Dec. 2013.
38.	Yusuke Seno, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Preparation of Methyl Propionate from Oxidative Esterification of Propionaldehyde Using Palladium Catalysts, Pre-symposium of International Symposium on Catalysis and Fine Chemicals 2013 (C&FC2013), Himeji, Nov. 2013.
39.	Ming Cai, Hitoshi Takagi, Antonio Norio Nakagaito, Kazuya Kusaka, Masahiro Katoh and Yan Li : Effects of alkali treatment on microstructure and tensile properties of abaca fiber, Proceedings of the SAMPE CHINA 2013, S5-6_1-S5-6_4, Shanghai, Oct. 2013.
40.	Shigeru Sugiyama, Takuya Ehiro, Yoshihisa Nitta, Ai Itagaki, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : The Oxidative Dehydrogenation of Various Alkanes on FSM-16 Doped with Chromium, XIth Europian Congress on Catalysis (EuropaCat XI), Lyon, France, Sep. 2013.
41.	Shigeru Sugiyama, Yasuhiro Okada, Youhei Kosaka, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Preparation of Propionaldehyde from 1,2-Propanediol on FSM-16, 14th Japan-Korea Symposium on Catalysis, Nagoya, Jul. 2013.
42.	Hitoshi Takagi, Antonio Norio Nakagaito, Masahiro Katoh, Yuya Muneta and Jitendra Kumar Pandey : Characterization of cellulose nanofiber extracted from waste bio-resource, Proceedings of the International Symposium on Green Manufacturing and Applications, C-4-3_1-C-4-3_4, Honolulu, Jun. 2013.
43.	MIchisato Kimura, Mao Sugino, Masahiro Katoh, Toshihide Horikawa, Keizo Nakagawa and Shigeru Sugiyama : FTIR studies of water adsorption-desorption behavior on mesoporous Y-type zeolites, 25th Symposium on Chemical Engineering, Okinawa, Dec. 2012.
44.	Oshie Tsuji, Atsushi Tenshin, Masahiro Katoh, Toshihide Horikawa, Keizo Nakagawa, Shigeru Sugiyama, Takushi Yoshikawa and Mamoru Wada : Preparation of MFI-type zeolite membranes formed on porous stainless steel supports for separation of ethanol from real bio-ethanol, 25th Symposium on Chemical Engineering, Okinawa, Dec. 2012.
45.	Yuka Arai, Keizo Nakagawa, Ken-Ichiro Sotowa, Shigeru Sugiyama and Masahiro Katoh : Formation processes of hydroxylapatite nanorods prepared using sodium dodecylphosphate template, 25th Symposium on Chemical Engineering, Okinawa, Dec. 2012.
46.	Jun Jitoku, Keizo Nakagawa, Ken-Ichiro Sotowa, Shigeru Sugiyama and Masahiro Katoh : Adsorption property of various organic compounds for layered titanate nanosheets with a lamellar mesostructure, 25th Symposium on Chemical Engineering, Okinawa, Dec. 2012.
47.	Megumi Katayama, Takuya Ohshima, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Low-temperature carbon combustion over CuO-CeO2 composite nanorods prepared by surfactant templating method, 25th Symposium on Chemical Engineering, Okinawa, Dec. 2012.
48.	Yasuhiro Okada, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Catalytic Synthesis of C3 and C4 Olefins from Ethanol and Ethylene over Ni-FSM-16, 25th Symposium on Chemical Engineering, Okinawa, Dec. 2012.
49.	Takuya Bando, Yusuke Seno, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : XAFS Study on Active Site over Pd/Al2O3 Catalyzing the Oxidative Methylation of Propionaldehyde, 25th Symposium on Chemical Engineering, Okinawa, Dec. 2012.
50.	Toshihide Horikawa, Noriyuki Sakao, Masahiro Katoh, Jun'ichi Hayashi, D. D. Do and Ken-Ichiro Sotowa : Preparation of N-doped porous carbon and its water adsorpiton behavior, International Conference on Emerging Advanced Nanomaterials (ICEAN-2012), Brisbane, Oct. 2012.
51.	Toshihide Horikawa, Noriyuki Sakao, Masahiro Katoh, Jun'ichi Hayashi and D. D. Do : Preparation of nitrogen-doped porous carbon using N-source additive and its water adsorption behavior, Chemeca2012, Wellington, Sep. 2012.
52.	Bistamam Shahril Amin Mohd, Hitoshi Takagi, Antonio Norio Nakagaito, Masahiro Katoh, Kazuya Kusaka and Jitendra Kumar Pandey : Development of green nanocomposites reinforced by cellulose nanofibers from waste newspaper, Proceedings of the Ninth Joint Canada-Japan Workshop on Composites, J21_1-J21_8, Kyoto, Jul. 2012.
53.	Hiroaki Genta, Hitoshi Takagi, Antonio Norio Nakagaito, Hiroki Ishikawa, Masahiro Katoh and Hiroshi Saito : Effect of surface modification on mechanical properties of bamboo fiber reinforced composites made by VaRTM, Proceedings of the Ninth Joint Canada-Japan Workshop on Composites, J19_1-J19_7, Kyoto, Jul. 2012.
54.	Masahiro Katoh, Oshie Tsuji, Toshihide Horikawa, Tatsuya Yamazaki, Takushi Yoshikawa and Mamoru Wada : Photocatalytic Hydrogen Production from Bio-ethanol using TiO2 Coated on Glass Beads, The 5th China-Japan Workshop on Environmental Catalysis and Eco-materials, Shanghai, Nov. 2011.
55.	Noriyuki Sakao, Toshihide Horikawa, Masahiro Katoh, Jun'ichi Hayashi and D. D. Do : Characterization of nitrogen-doped porous carbon and the effects of N-doping on water adsorption, The 9th International Conference on Separation Science and Technology (ICSST11), Jeju, Korea, Nov. 2011.
56.	Toshihide Horikawa, Noriyuki Sakao, Jun'ichi Hayashi, Masahiro Katoh, Van T. Nguyen and D. D. Do : Preparation of nitrogen doped porous carbon and the effect of N-doping on water adsroption, Carbon2011, Shanghai, Jul. 2011.
57.	Mohamed Reda Berber, Inas Hazzaa Hafez, Keiji Minagawa, Masahiro Katoh, Masami Tanaka and Takeshi Mori : CONTROL OF NANOPARTICLE SIZE, CRYSTAL STRUCTURE AND GROWTH OF LAYERED DOUBLE HYDROXIDE BY HYDROTHERMAL TREATMENT, 6th International Conference on Advanced Materials Development and Performance, Tokushima, Jul. 2011.
58.	Masahiro Katoh, Ryuhei Koide, Kenzo Yamada, Takanori Yoshida and Toshihide Horikawa : IR Spectroscopic Analysis of Temperature Behavior of Adsorbed Water on Y-type Zeolite, AMDP2011, Tokushima, Jul. 2011.
59.	Kouji Kinouchi, Masahiro Katoh, Toshihide Horikawa, Takushi Yoshikawa and Mamoru Wada : The catalytic hydrogen production by steam-reforming of real bio-ethanol using a Pd membrane reactor, AMDP2011, Tokushima, Jul. 2011.
60.	Toshihide Horikawa, Hiroyuki Asano, Kazuhide Akiyama, Daisuke Nakahara and Masahiro Katoh : Effects of the organic solvent in carrier gas on the prepared TiO2 thin film by metal-organic chemical vapor deposition method, AMDP2011, Tokushima, Jul. 2011.
61.	Masahiro Katoh, Takanori Yoshida, Toshihide Horikawa and Tahei Tomida : Time Solved FTIR Study of Competitive Adsorption of Offensive Smell and Water on Several Water Adsorbents, 10th International Conference on Fundamentals of Adsorption, Book of Abstracts, 355, Awaji, May 2010.
62.	Mohamed Reda Berber, Inas Hazzaa Hafez, Keiji Minagawa, Masahiro Katoh, Takeshi Mori and Masami Tanaka : Layered Double Hydroxide-Nanocomposite as a Core for Dual Drug Delivery Systems, 17th International Symposium on Microencapsulation, Nagoya, Sep. 2009.
63.	Toshihide Horikawa, Yoshiyuki Kitakaze, Tomoki Sekida, Hayashi Jun'ichi and Masahiro Katoh : Characteristics and Humidity Control Capacity of Activated Carbon from Bamboo, Chemeca2009, 421, Perth, Sep. 2009.
64.	Mohamed Reda Berber, Inas Hazzaa Hafez, Keiji Minagawa, Masahiro Katoh, Takeshi Mori and Masami Tanaka : Monodisperse nanocomposites of non-steroid anti inflammatory drugs-layered double hydroxide for controlled release formulation, International Symposium on Zeolites and Microporous Crystals (ZMPC2009), Tokyo, Aug. 2009. (Summary) Bio-nanocomposites of non-steroid anti inflammatory drugs with layered double hydroxide (LDH) were successfully synthesized to develop a new approach for their controlled release formulation.
65.	Nobunari Itoh, Masahiro Katoh and Nobuaki Okano : Comparison of spectral transmittance degradation due to the organic gas contamination with on-orbit degradations of launched sensors, Proceedings of SPIE, Vol.7149, 71490F, New Caledonia, Nov. 2008. (Link to Publication Site) ● Publication site (DOI): 10.1117/12.804917 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-67649239847 (DOI: 10.1117/12.804917, Elsevier: Scopus)
66.	Masahiro Katoh, Mori Narisuke, Toshihide Horikawa and Tahei Tomida : Liquid Phase Synthesis of N,S-containing Titanium Dioxide Powders with Photocatalytic Activity under UV and Visible Light, Interantional Symposium on Surface Science and Nanotechnology, Tokyo, Nov. 2008.
67.	Masahiro Katoh, Imayama Akihiro, Narisuke Mori, Toshihide Horikawa and Tahei Tomida : Evaluation of Photocatalytic Activity of Nitrogen and Fluorine co-doped TiO2 Prepared using of various pH Solutions, International Conference on Advanced Materials, Development and Performance 2008, Beijing, Oct. 2008.
68.	Masahiro Katoh, Narisuke Mori, Toshihide Horikawa and Tahei Tomida : Effect of pH on the Microstructures and Photocatalytic Activity of N,S-containing Titanium Dioxide Powders Prepared by Liquid Phase Synthesis, International Conference on Advanced Materials, Development and Performance 2008, Beijing, Oct. 2008.
69.	Masahiro Katoh, Katsunori Nishihara, Koichi Chohama, Toshihide Horikawa and Tahei Tomida : The Effect of Carbon Monoxide on the Hydrogen Permeability of a Palladium Membrane on Porous Stainless-Steel Support, International Conference on Advanced Materials, Development and Performance 2008, Beijing, Oct. 2008.
70.	Masahiro Katoh, koji Kinouchi, Koichi Chohama, Toshihide Horikawa and Tahei Tomida : The Catalytic Hydrogen Production by Dry-Reforming of Methane over Ni/Al2O3 Catalysts using a Pd Membrane Reactor, International Conference on Advanced Materials, Development and Performance 2008, Beijing, Oct. 2008.
71.	Masahiro Katoh, Koichi Chohama, Toshihide Horikawa and Tahei Tomida : The Hydrogen Production by Methane Dry Reforming over Pt/Al2O3 Catalysts using Palladium Membrane Reactor on Porous Stainless-Steel Support, International Conference on Advanced Materials, Development and Performance 2008, Beijing, Oct. 2008.
72.	Masaya Takahashi, Daisuke Yonekura, Ri-ichi Murakami and Masahiro Katoh : The influence of surface roughness of substrate on SiO2 powders-steel adhesion, International Conference on Advanced Materials Development & Performance 2008, Beijing, Oct. 2008.
73.	Toshihide Horikawa, Masashi Kajikawa, Jun'ichi Hayashi, Masahiro Katoh and Tahei Tomida : Composite RF-bamboo nanoporous carbon for adsorption heat pump applications, Chemeca2008, 2008-2017, Newcastle, Australia, Sep. 2008.
74.	Mohamed Reda Berber, Kensuke Kashu, Masahiro Katoh, Keiji Minagawa and Masami Tanaka : Intercalation of organic drugs or polymers into Mg-Al layered double hydroxide, The 10th Pacific Polymer Conference, Kobe, Dec. 2007. (Summary) A new approach of improving the drug solubility and permeability is the intercalation into layered double hydroxide (LDH) which is biocompatible and has pharmaceutical applications. Through hydrotalcite, the interlayer counterions can be replaced by organic drugs or polymers applying reconstruction, coprecipitaion processes. In acidic medium the hydrotalcite dissolved releasing the intercalated compounds in a molecular form which is suitable for adsorption. The samples were characterized by X-ray diffraction, FTIR spectroscopy, SEM, specific surface area and in vitro release. The results are discussed with those of other materials e.g. thermosensitive polymer gels.
75.	Tahei Tomida, Yu Nagaoka, Kazuomi Nishi, Kinuyo Ogawa, Jin Ming Ji, Toshihide Horikawa, Masahiro Katoh and Jun'ichi Hayashi : Adsorption Properties and Photocatalytic Activity of TiO2 and La-Doped TiO2, 9th International Conference on Fundamentals of Adsorption, 413, Sicily, Italy, May 2007. (Keyword) adsorption / titanium dioxide / photocatalytic degradation
76.	Toshihide Horikawa, Takashi Isoda, Masahiro Katoh and Tahei Tomida : Preparation and characterization of nitrogen-doped TiO2 thin film by dip-coating, 13th International Conference on Solid Films and Surfaces, PI-15, Bariloche, Argentina, Nov. 2006.
77.	Tahei Tomida, Naoyuki Okada, Masahiro Katoh, Yuko Sekimoto and Toshihide Horikawa : Kinetic study for photocatalytic decomposition of acetone and acetaldehyde in air, Pacifichem 2005, ENVR#279, Honolulu, Dec. 2005.
78.	Toshihide Horikawa, Takashi Isoda, Masahiro Katoh and Tahei Tomida : Preparation of TiOxNy films as visible light photocatalyst by dip-coating, Pacifichem 2005, MATL#576, Honolulu, Dec. 2005.
79.	Tahei Tomida, Yoshinori Hama, Toshihide Horikawa, Masahiro Katoh and Shigeru Katoh : Photocatalytic Decomposition of Dyes (Indigo and Indigo Carmine) Dissolved in Water Using an Annular Type Packed-Bed Reactor, Chemeca 2005, #613, Brisbane, Sep. 2005.
80.	Toshihide Horikawa, Daisuke Ichimiya, Masahiro Katoh, Tahei Tomida, Jun'ichi Hayashi and Yoshikazu Miyake : Preparation of spherical porous SiO2 particles containing Fe3O4, Chemeca 2005, #211, Brisbane, Sep. 2005.
81.	Akihiro Shimamura, Tomoki Yabutani, Masahiro Katoh and Eiji Kanezaki : On the interaction of phosphate to Mg/Al-layered double hydroxide, anion exchange of interlayer carbonate with phosphate in solution, Advanced Materials Development & Performance Conference 2005, Auckland, Jul. 2005.
82.	Kei-ichiro Murai, Yuichiro Murakami, Tomiko Sei, Masahiro Katoh, Ichiro Nakabayashi, Toshihiro Moriga, Suminori Tanaka, Yoshiyuki Kidoguchi and Kei Miwa : Total Oxidation of Activated Carbon over PdO-CeO₂/TiO₂-Al₂O₃ Catalyst, Advanced Materials Development & Performance Conference 2005, Auckland, Jul. 2005.
83.	Masahiro Katoh, Akira Sondoh, Toshihide Horikawa and Tahei Tomida : Characterization of Palladium and Palladium-Silver Alloy Layers on Stainless Steel Support, Advanced Materials Development & Performance Conference 2005, Auckland, Jul. 2005.
84.	Masahiro Katoh, Nobuaki Okano, Nobunari Itoh, Toshihide Horikawa and Tahei Tomida : FTIR Study on Molecular Contamination on Surface of Optical Materials, Advanced Materials Development & Performance Conference 2005, Auckland, Jul. 2005.
85.	Masahiro Katoh, Hironori Aihara, Toshihide Horikawa and Tahei Tomida : Preparation of Visible Light Active Sulfur and Nitrogen Containing Titanium Oxide Photocatalysts, Advanced Materials Development & Performance Conference 2005, Auckland, Jul. 2005.
86.	Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : Photocatalytic Reaction of Acetone on Mesoporous Chromium Silicate, Advanced Materials Development & Performance Conference 2005, Auckland, Jul. 2005.
87.	Nobunari Itoh, Masahiro Katoh and Nobuaki Okano : Development of a transmissometer for evaluating molecular contamination effects and preliminary results, Proceedings of SPIE, Vol.5655, 461-469, Honolulu, Nov. 2004. (Summary) 人工衛星に搭載されるほとんどの光学地球観測センサでは，打上からの経過時間とともにセンサ出力が徐々に減少していく軌道上劣化と呼ばれる現象が報告されており，衛星観測データからの算出される物理量の不定性に直接影響を及ぼす問題となっている．この劣化現象の原因の1つと考えられている軌道上でのガス状汚染物質の光学面への吸着による透過率低下量を測定するための計測システムを開発した． (Link to Publication Site) ● Publication site (DOI): 10.1117/12.578724 (Link to Search Site for Scientific Articles) ● Summary page in Scopus @ Elsevier: 2-s2.0-20344377914 (DOI: 10.1117/12.578724, Elsevier: Scopus)
88.	Itoh Nobunari and Masahiro Katoh : The measurements System for Evaluating the Relation between Molecular Adsorption Quantity and Optical T ransmissivity degradation, The International Symposium on Optical Science and Technology, SPIE's 49th Annual Meeting, Denver, Aug. 2004.
89.	Tahei Tomida, Naoyuki Okada, Masahiro Katoh and Sigekazu Katoh : Adsorption and Photocatalytic Decomposition of Volatile Organic Compounds on Photocatalyst of TiO2-Silica Beads, 8th International Conference on Fundamentals of Adsorption, 150, Arizona, May 2004. (Summary) シリカビーズに被膜した二酸化チタン光触媒を調製し，揮発性有機物質のアセトンおよびアセトアルデヒドの光触媒への吸着と光触媒分解について研究したものである．アセトンもアセトアルデヒドも吸着等温線はLangmuir型で表された．ガス相の赤外吸収スペクトルからこれらの有機物質は光触媒分解によって，主に，二酸化炭素と水に分解されることを明らかにした．また，分解速度を解析して，これら揮発性有機物質の分解による濃度減少の径持変化を良く表すことができる光触媒分解速度モデルを提案した．
90.	Masahiro Katoh, Tahei Tomida and Manabu Shinkawa : Adsorption Properties of Nitrogen, Carbon Dioxide and Nitrogen Dioxide onto Mesoporous Chromium Silicate, 8th International Conference on Fundamentals of Adsorption, Sedona, May 2004. (Summary) クロムを含有するメソ多孔性シリカ(Cr-FSM-16)を調製し，分光学的方法により検討した．粉末X線回折により，Crが骨格内に高分散していることが確認された．また，紫外可視分光法により，酸素イオンから6価のクロムイオンへの電荷移動にともなう吸収が確認され，クロムが二重結合した酸素2個と単結合した酸素2個に配位された状態であることが示された．
91.	Kazuya Tokuda, Junko Saita, Masahiro Katoh and Tahei Tomida : Mass-Transfer Rate in Recovering Metal Ions using a Water-Soluble Chelating Polymer and a Microporous Hollow Fiber Membrane, 10th Asian International Symposium on Ecotechnology, Toyama, Nov. 2003.
92.	Katsumi Tsuchiya, Masahiro Katoh, Tahei Tomida and Takayuki Saito : Enhancement of Bubble Dissolution Associated with Formation of Bubble-Surface Wave, Proc. 4th Int. Conf. Multiphase Flow (in CD-ROM), 488, New Orleans, LA, May 2001. (Summary) 二酸化炭素を含む単一気泡の溶解過程を気泡表面振動との関係において研究したものである．実験的には下降液流中に気泡を保持し，高速度カメラで気泡表面の動きを詳細に観察した．気泡の溶解速度は表面の汚れに強く影響されるといわれているが，より表面の運動に影響されることを明らかにした．溶解度の異なる2種のガスを含む単一気泡の溶解過程モデルに基づいて理論的に解析し，気泡径およびガス相組成の径時変化を良く表すことができることを示した．
93.	Masahiro Katoh, Tatsuya Yamazaki, Sentaro Ozawa and Tahei Tomida : Adsorption sites of Ion-Exchanged ZSM-5 zeolites for Binary Gases by IR spectroscopic Study, 7th International Conference on Fundamental of Adsorption, Nagasaki (Japan), May 2001. (Summary) アルカリ金属カチオンでイオン交換したZSM-5ゼオライトの吸着サイトについて，二成分系ガス(二酸化炭素/窒素，メタン/一酸化炭素，一酸化炭素/一酸化窒素，一酸化炭素/二酸化炭素)を用いて赤外分光法により検討した．ZSM-5には，細孔壁とカチオンサイトという大きく分けて2種類のサイトがあるが，カチオンサイトは，さらにそのサイトが存在する細孔構造に起因する電場強度の違う2種類のサイトに分けられることを明らかにした．
94.	Tahei Tomida, Norikazu Matome, Yuusuke Takahara, Daisuke Harada, Masahiro Katoh and Sigekazu Katoh : Photocatalytic decomposition of organics solved in water using an annular-type reactor packed with TiO2-coated beads, 2000 International Chemical Congress of Pacific Basin Societies, Honolulu (Hawaii, USA), Dec. 2000. (Summary) 二酸化チタンを直径2mmのガラスビーズおよび石英ビーズにコーティングし，823℃で焼成して光触媒を調製した．XRD測定から二酸化チタンはアナターゼであることを確認した．この光触媒を環状部に充填し，中心に光源(低圧水銀ランプ，ブラックライト)を設置した環状型光触媒反応器において，2,4-ジニトロフェノールの光触媒分解を行い，分解速度を決定した．装置内の光強度を考慮したモデルに基づいて反応系の特性値を決定し，光触媒分解による2,4-ジニトロフェノールの濃度変化を良く表すことができることを示した．
95.	Tahei Tomida, Kinya Hamaguchi, Shunshke Tsunasima, Masahiro Katoh and Seizo Masuda : Removal of metal ions from aqueous solutions by diafiltration using water-soluble chelating polymers, The 2000 International Chemical Congress of Pacific Basin Societies, Honolulu, Dec. 2000. (Summary) 水溶性キレートポリマー(ポリアクリル酸，ポリ-アルファ-アセチルアミノアクリル酸)と二価金属イオン及び希土類金属イオンとの結合平衡関係を限外濾過法によって測定した．平衡関係をポリマーと金属の錯形成のモデルによって解析し，結合平衡等温線の実測値と計算値のフィティング法によって平衡定数を決定した．また，水溶性キレートポリマーと中空糸膜を用いて，水溶液中から金属イオンを回収し，速い物質移動速度(膜透過速度)で回収できることを示した．
96.	Tahei Tomida, Hideki Sowa, Masakazu Kondo, Mutsuhide Kanaji, Masahiro Katoh and Seizo Masuda : Properties of polyacryloylacetone resin for adsorption and separation of divalent metal ions, 219th national Meeting of the American Chemical Society, San Francisco (USA), Mar. 2000. (Summary) ポリアクリロイルアセトン(PAAc)を被膜したシリカビーズへの二価重金属イオンCu(II), Zn(II), Pb(II)の吸着平衡を1成分系及び2成分で流通吸着法によって測定した．PAAcとニ価金属イオンの錯形成について提案したモデルに基づいて吸着等温線をシミュレートし，実験結果と計算値が一致するようにフィティング法によって平衡定数を決定した．
97.	Masanao Orihara, Toshihiro Moriga, Ichiro Nakabayashi, Masahiro Katoh, Shigeru Sugiyama and Suminori Tanaka : Catalytic Activity and Spectroscopic Investigations on Methane Oxidation by Goethite, The 2nd International Conference on Advanced Materials Development and Performance, Vol.2, 640-643, Tokushima, Nov. 1999.
98.	Masahiro Katoh, Mituo Kamiyamane, Mayumi Kimura and Tahei Tomida : Separation of Mixture Gases by Adsorption onto Several Mesoporous Materials, The 2nd International Conference on Advanced Materials Development and Performance, 632-635, Tokushima, Nov. 1999. (Summary) 細孔径の異なるFSMタイプのメソ多孔性シリカを調製し，窒素と二酸化炭素の混合ガスからの二酸化炭素の分離特性を検討した．いずれのFSMでも，二酸化炭素が選択的に分離されたが，特にFSM-16で，0.2MPa∼0.4MPaの条件で，選択性が高いことを見出した．
99.	Masahiro Katoh, Hitoshi Takao, Naoto Abe and Tahei Tomida : Adsorption Selectivity of FSM-16 for Several Organic Solvents, The 2nd International Conference on Advanced Materials Development and Performance, 628-631, Tokushima, Nov. 1999. (Summary) シリカ系メソ多孔体(FSM-16)が調製され，種々の有機溶媒の吸着選択性を検討した．カラム法で得られた結果から，FSM-16は有機溶媒分離能が高いことが示された．また，バッチ法から得られた吸着量から，FSM-16は市販の13Xゼオライトやシリカゲルに比べ，ヘプタン溶媒中の高濃度のベンゼンを，多く吸着できることがわかった．
100.	Masahiro Katoh, Takushi Yoshikawa, Takao Tomonari, Keiko Sumida and Tahei Tomida : IR Spectroscopic Study on Properties of Carbon Dioxide - Nitrogen Mixture Adsorbed on Ion-Exchanged ZSM-5 Zeolites, The 2nd International Conference on Advanced Materials Development and Performance, 400-403, Tokushima, Nov. 1999. (Summary) 種々のアルカリ金属カチオンでイオン交換したZSM-5を用いて，窒素と二酸化炭素の混合ガスからの二酸化炭素の分離特性について検討した．二酸化炭素は2種類の吸着形態をもち，弱い吸着種は，吸着圧力の増加にともない吸着量が増加したが，強い吸着種ではその量は飽和に達することがわかった．また，強い吸着種は，吸着温度での排気では脱離せず，共存窒素のカチオンへの吸着を阻害することがわかった．
101.	Masahiro Katoh, Kazuyuki Katayama, Naoto Abe, Takushi Yoshikawa and Tahei Tomida : Characterization of Ion-Exchanged ZSM-5 Zeolites by Adsorption of Binary Gas Mixtures, Advanced Materials Development and Performance, 226-231, Auckland (New Zealand), Jul. 1997. (Summary) 種々のアルカリ金属カチオンでイオン交換したZSM-5への酸素，窒素，二酸化炭素の吸着特性を，赤外分光法を用いて検討した．窒素と酸素の混合系では，窒素が選択的にZSM-5に吸着し,特に，Li-ZSM-5とNa-ZSM-5で高い選択性が確認された．窒素と二酸化炭素の混合系では，二酸化炭素の不可逆吸着種が確認されたが，373K以上ではその量はゼロになった．
102.	Sentaro Ozawa, Tatsuya Yamazaki and Masahiro Katoh : Adsorption of Several Gases onto Ion-Exchanged ZSM-5 Zeolites, Seiken International Symposium, 135-141, Tokyo, May 1991. (Summary) 種々のアルカリ金属カチオンでイオン交換したZSM-5型ゼオライトへ，窒素，メタン，酸素，二酸化炭素を吸着させ，得られた吸着等温線の相関について，ポテンシャル理論により検討した．また，得られた結果を赤外分光法により得られた情報を元に考察した．

Proceeding of Domestic Conference:

1.	Takafumi Hanada, Masahiro Katoh and 後藤雅宏 : 協同抽出効果を発揮する疎水性深共晶溶媒を用いた希土類金属の液液および固液抽出分離の検討, 第43回溶媒抽出討論会, Nov. 2024.
2.	嶋宇紘, Takafumi Hanada and Masahiro Katoh : ピリジン配位子を組み込んだ疎水性深共晶溶媒を用いた自動車触媒からの白金族金属の抽出分離の検討, 第43回溶媒抽出討論会, Oct. 2024.
3.	瀧虎太郎, Takafumi Hanada and Masahiro Katoh : βジケトン配位子を有する疎水性深共晶溶媒によるLiBブラックマスからのレアメタルの浸出選択性の検討, 第43回溶媒抽出討論会, Oct. 2024.
4.	Moe Kudo, Hinata Sato, Jyukiya Maruayma, Takafumi Hanada, Masahiro Katoh and Kenji Ohnishi : Analysis with the infrared camera of the water boiling promotion behavior on the heat transfer SUS surface with micro polishing, 化学工学会第55回秋季大会, Sep. 2024.
5.	Tsuyoshi Shijiraya, Takafumi Hanada and Masahiro Katoh : Pd membrane preparation by heat treatment and vacuum-assisted electroless plating on porous SUS tube with USY zeolites particles, 化学工学会第89年会, Mar. 2024.
6.	Airi Sato, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Hard Template法によって調製したLaAlO3担体に担持したPt-Rh共存触媒によるバイオエタノール水蒸気改質反応, 第133回触媒討論会, Mar. 2024.
7.	Daiki Hatakeyama, Sora Akagi, Hikaru Oguri, Takafumi Hanada, Masahiro Katoh, Yasunori Oumi and Kazuyuki Nakai : 配向性向上を目指したシリカライト膜の成膜と二酸化炭素の分離, 第36回日本吸着学会研究発表会, Dec. 2023.
8.	Airi Sato, Asahi Sugawara, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : 種々のLaAlO3担体に担持したPt-Rh共存触媒によるバイオエタノール水蒸気改質反応, 第132回触媒討論会, Sep. 2023.
9.	Takafumi Hanada, 後藤雅宏 and Masahiro Katoh : 深共晶溶媒によるレアメタル浸出における選択性制御因子の探索, 化学工学会第54回秋季大会, Sep. 2023.
10.	Tohru Oda, Moe Kudo, Hayato Nakanishi, SATOH Hinata, Takafumi Hanada, Masahiro Katoh and Kenji Ohnishi : Boiling Heat Transfer Enhancement for Water on Polished Aluminum Alloy Plate Surface, 化学工学会第54回秋季大会, Sep. 2023.
11.	Takafumi Hanada and Masahiro Katoh : 金属配位子からなる深共晶溶媒の開発とネオジム磁石リサイクルへの応用, 中四国若手CE合宿2023, Aug. 2023.
12.	Chika Tanaka and Masahiro Katoh : Pd緻密膜の形成をめざしたシリカビーズを導入した多孔質SUS管上への吸引を伴う無電解めっき, 化学工学会岡山大会2022, Dec. 2022.
13.	Tomoya Kozai, Koji Saitoh and Masahiro Katoh : 合金膜中のPd使用量削減を目指した多孔質SUS管へのNi無電解めっき, 化学工学会岡山大会2022, Dec. 2022.
14.	Sora Akagi, Sezuna Hyuga, Masahiro Katoh, Yasunori Oumi and Kazuyuki Nakai : 二次成長法による多孔質支持体へのシリカライト膜の成膜と二酸化炭素の分離能, 第38回ゼオライト研究発表会, Dec. 2022.
15.	Masahiro Katoh : SUS製プレート面への微細研磨加工による水の沸騰伝熱促進, 日本海水学会西日本支部講演会要旨集, Oct. 2022.
16.	Masahiro Katoh : ゼオライトの吸着特性評価と中間層微粒子としての応用, 第36回九州コロイドコロキウム講演要旨集, Aug. 2022.
17.	Chika Tanaka and Masahiro Katoh : Effect of vacuum pressure on preparation of Pd membrane under vacuum-assisted plating on porous SUS tube with spherical silica particles, 化学工学会第87年会, Mar. 2022.
18.	Katsumi Terasaki, Tomoya Kozai and Masahiro Katoh : パラジウムの薄膜化をめざした多孔質SUS支持体へのゼオライト系微粒子の導入, 第37回ゼオライト研究発表会, Dec. 2021.
19.	Naohiro Shimoda, Masayuki Mizuno, Masahiro Katoh and Shigeru Sugiyama : Degradation and carbon deposition behaviors due to impurity sulfur over the catalyst for CO2 reforming of methane, 石油学会函館大会(第51回石油・石油化学討論会), Nov. 2021. (Summary) メタンCO2改質反応においては，炭素析出による活性点の被毒の他にも硫黄成分による被毒も触媒劣化の原因として知られており特にNi触媒は性能低下が顕著である．しかし，炭素析出と硫黄被毒ではどちらが触媒劣化の主な要因であるのかは未だ解明していない．そこで本研究では，メタンCO2改質反応において，不純物硫黄による触媒劣化と炭素析出挙動の相関性の評価を行う．
20.	Sora Akagi, Daiki Hatakeyama, Masahiro Katoh, Yasunori Oumi and Kazuyuki Nakai : 二酸化炭素分離をめざした多孔質管状支持体へのシリカライト膜の成膜, 第34回日本吸着学会研究発表会, Oct. 2021.
21.	Masayuki Mizuno, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Study of degradation and carbon deposition behaviors due to impurity sulfur over the catalyst for CO2 reforming of methane, 化学工学会第52回秋季大会, Sep. 2021. (Summary) メタンCO2改質反応においては，炭素析出による活性点の被毒の他にも硫黄成分による被毒も触媒劣化の原因として知られており特にNi触媒は性能低下が顕著である．しかし，炭素析出と硫黄被毒ではどちらが触媒劣化の主な要因であるのかは未だ解明していない．そこで本研究では，メタンCO2改質反応において，不純物硫黄による触媒劣化と炭素析出挙動の相関性の評価を行う．
22.	Katsumi Terasaki, Tomoya Kozai and Masahiro Katoh : Search of intermediate layer particles for formation of palladium thin membranes on porous SUS supports, 化学工学会第52回秋季大会, Sep. 2021.
23.	Masahiro Aki, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effect of alkaline treatment of FER-type zeolite for methanol to dimethyl ether reaction, 第128回触媒討論会, Sep. 2021. (Summary) 本研究では，メタノール脱水反応からのジメチルエーテル合成用触媒としてFER型ゼオライトに着目した．FER型ゼオライトは低温でも高い触媒性能を示すが，その強い酸性質から副生成物を生成させる．それらはゼオライト細孔内を拡散出来ずに堆積するため，ゼオライト中の活性点の被毒や細孔閉塞を引き起こし，触媒が劣化するとされている．そこで，本研究では，FER型ゼオライトへのアルカリ処理を検討し，ゼオライトのSi成分の選択的な溶出と結晶・細孔構造の変化によるさらなる触媒性能の向上を目指した．
24.	Mizuho Yoshida, Riku Okawa, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Partial Oxidation of Propane on Molybdenum-based Complex Oxide Catalysts, 化学工学会第86年会, Mar. 2021.
25.	Shigeru Sugiyama, Shino Endo, Naohiro Shimoda and Masahiro Katoh : Preparation of Chemical Precursors by Catalytic Hydrogenation of 2-Chloropropene, 化学工学会第86年会, Mar. 2021.
26.	Mizuho Yoshida, Riku Ohkawa, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effect of addition of Ce in Bi-Mo Complex Oxide Catalysts on Partial Oxidation of Propylene, 化学工学会中国四国支部広島大会2020, Dec. 2020. (Summary) アクロレインは主要な化学中間体であり，メチオニンやアクリル酸など様々な化学製品の合成原料として不可欠である．アクロレインの工業的な製法としてプロピレンの部分酸化が主流であり，長期に渡ってBi-Mo複合酸化物が有効な触媒として用いられている．本研究では高いレドックス性能を有するCeに着目し，Bi-Mo複合酸化物に含まれるMoの一部を Ceで置換することにより得られる効果を検討した．
27.	Tashu Yoshida, Akihiko Koizumi, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Effect of Alumina Support on dehydrogenation of Isobutane over Ni Catalysts in the presence of CO2, 化学工学会中国四国支部広島大会2020, Dec. 2020. (Summary) 低級アルケンに含まれるイソブテンは，近年ブチルゴムやプラスチック原料などに利用され需要が増加傾向にある．先行研究としてO₂存在下でのイソブタンの酸化脱水素反応が行われたが，O₂による深度酸化の誘発，CO₂生成などの問題がある．そこで本研究では，CO₂存在下でイソブタンの直接脱水素反応を行った．触媒担体としては，γ-Al₂O₃とα-Al₂O₃を用い，金属(NiO)担持量，反応温度，反応ガス濃度条件を変更し，触媒活性の検討を行った．
28.	Shino Endo, Yuka Hiwada, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Hydrogenative Dechlorination of 2-Chloropropene over Pd Catalysts, 化学工学会中国四国支部広島大会2020, Dec. 2020. (Summary) プロピレンは，ポリプロピレンのほかフェノールやアクリル酸など多数の用途を持つ工業的に重要な物質である．そこで，需要の拡大が予想されるプロピレンの新たな製造プロセスとして，2-クロロプロペンの水素化脱塩素反応に着目した．この反応により，用途の少ない2-クロロプロペンからプロピレンへの転化が期待される．本研究では，4種類のPd/Al2O3工業用触媒を使用し，反応に対する活性の調査および触媒特性評価を行った．
29.	Shino Endo, Teppei Moroyama, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effect of Catalyst and Partial Pressure of Hydrogen on Selective Hydrogenation of 2-Chloropropene, CSJ West Japan Chemistry Forum 2020, Nov. 2020. (Summary) 2-クロロプロパンは，農薬や医薬品の中間体など幅広い分野で使用される有用な物質である．しかし，2-クロロプロパンを主生成物として効率的に得られる工業的製法は未だ確立されていない．そこで，新規製造プロセスとして，2-クロロプロペンの選択的水素化反応に着目した．Al2O3結晶構造およびPd担持量の異なる3種類のPd/Al2O3工業用触媒を使用し，反応に有効な触媒の追究，さらに反応時の水素分圧が及ぼす影響を調査した．
30.	Ikumi Okitsu, Kazuki Hashimoto, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Catalytic Partial Oxidation under UV-LED Irradiation, CSJ West Japan Chemistry Forum 2020, Nov. 2020. (Summary) プロピレンオキサイド(PO)とは，化成品の合成中間体として幅広い分野で利用されている．現在の主なPO製法は，生産効率は良好であるが環境的負荷の大きさが問題として挙げられる．本研究では環境的負荷が低い，プロピレンと酸素を触媒に通すことでPOを得る接触部分酸化反応に着目した．先行研究において良好なPO収率を示したAg-NaCl/SrCO3を用いてUV-LED照射/非照射の比較試験を行ったところ，UV-LED照射によってPO収率が増加することが明らかになった．
31.	Kenta Imanishi, Takeru Ishimoto, Miku Hisai, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Takaiku Yamamoto and Jhy-Chern Liu : Recovery of Phosphorus from Dephosphorization Slag Using Citric Acid Treatment, CSJ West Japan Chemistry Forum 2020, Nov. 2020. (Summary) リンは肥料や工業製品など我々の生活に必須元素である．一方，リンの原料であるリン鉱石は地球上に偏在しているうえに枯渇が懸念されているため，二次資源からリンを回収する技術が求められている．そこで本研究では製鉄の副産物であり，膨大な排出量の脱リンスラグからのリン回収について報告する．リンの溶出のためにクエン酸処理を施し，続いて水酸化ナトリウムによりpHを調整することでリン溶液の取得を目指した．
32.	Naohiro Shimoda, Masahiro Aki, Masahiro Katoh and Shigeru Sugiyama : Effects of alkaline treatment of FER-type zeolite for methanol dehydration reaction, 石油学会熊本大会(第50回石油・石油化学討論会), Nov. 2020. (Summary) メタノールの脱水反応によるジメチルエーテル合成用触媒としてFER型ゼオライトに着目した．FER型ゼオライトは低温でも良好な触媒活性を示すが，強い酸性質からゼオライトの細孔内で副生成物などが拡散できずに堆積し，ゼオライト中の活性点の被毒や細孔閉塞を引き起こし触媒が劣化する．そこで本研究では，ゼオライトへのアルカリ処理を検討し，ゼオライト中のSi成分の選択的な溶出と細孔構造の変化による触媒性能の向上を目指した． (Keyword) メタノール脱水 / FER型ゼオライト / アルカリ処理
33.	Shigeru Sugiyama, Yasunori Hayashi, Naohiro Shimoda, Masahiro Katoh, Yuki Kato and Wataru Ninomiya : Effect of Active Oxygen Excited with UV-LED on Methane Oxidation on Sm2O3, 石油学会熊本大会(第50回石油・石油化学討論会), Nov. 2020. (Summary) 酸化サマリウム触媒によるメタンの酸化反応に対する活性酸素の影響を検討するために，UV-LED照射下でTiO2から発生するスーパーオキサイドとWO3から発生する過酸化水素の影響を検討した．前者の活性酸素はメタンから一酸化炭素への部分酸化を明確に促進したが，後者の活性酸素はほとんど効果を示さなかった．このような活性酸素の効果は酸化マグネシウム触媒では見られず，レドックスを示す酸化物に特有な挙動と思われる．
34.	Katsumi Terasaki, Yoshiki Inadu, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Introduction of aggeregated NaA zeolite powders for smoothing of porous SUS tube surface and formation of Pd thin membranes, 化学工学会第51回秋季大会, Sep. 2020.
35.	Yoshiki Inadu, Kota Ominami, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Preparation of dense Pd membrane by vaccum-assisted electroless plating on porous SUS with titania powders, 化学工学会第51回秋季大会, Sep. 2020.
36.	Masayuki Mizuno, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Degradation behavior of Pt-based catalysts by impurity sulfur component for CO2 reforming of methane, 化学工学会第51回秋季大会, Sep. 2020. (Keyword) CO2 reforming of methane / Sulfur poisoning / Catalyst degradation
37.	Kenta Imanishi, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Takaiku Yamamoto and Jhy-Chern Liu : Separation and recovery of phosphorous from dephosphorization slag using acid-alkali treatment, 化学工学会第51回秋季大会, Sep. 2020.
38.	Teppei Moroyama, Shino Endo, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Preparation of 2-chloropropane via catalytic hydrogenation, 化学工学会第51回秋季大会, Sep. 2020.
39.	Masahiro Aki, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effects of alkaline treatment of FER-type zeolite for methanol dehydration reaction, 第126回触媒討論会, Sep. 2020. (Keyword) メタノール脱水 / FER型ゼオライト / アルカリ処理
40.	Shigeru Sugiyama, Kanta Oribe, Tashu Yoshida, Naohiro Shimoda, Masahiro Katoh, Yuki Kato and Wataru Ninomiya : Dehydrogenation of Isobutane over Alumina-supported Nickel Catalyst with Improved Activity by Carbon Deposition, 第126回触媒討論会, Sep. 2020.
41.	Akane Yoshida, Hiroyuki Abe, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Au-Pt/MFI触媒によるバイオエタノールの気相部分酸化反応特性に及ぼす貴金属共存効果, 第125回触媒討論会, Mar. 2020.
42.	Yoshiki Inadu, Kota Ominami, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Preparation of Pd thin membrane by vacuum-assisted electroless plating on porous stainless tube with titania powders, 化学工学会第85年会, Mar. 2020.
43.	Taiyou Yamauchi, Miyu Nomura, Masahiro Katoh, Naohiro Shimoda, Shigeru Sugiyama and Kazuyuki Nakai : Analysis of membrane permeation mechanism of zeolite membrane in consideration of gas adsorption, 化学工学会第85年会, Mar. 2020.
44.	Shino Endo, Teppei Moroyama, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Selective hydrogenation of 2-chloropropene over Pd catalyst, 化学工学会第85年会, Mar. 2020.
45.	Kenta Imanishi, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Takaiku Yamamoto and Jhy-Chern Liu : Concentration of Phosphorus from Dephosphorization Slag by Various Acids, 化学工学会第85年会, Mar. 2020.
46.	Takamitsu Adachi, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Recovery of Phosphorus from Composted Chicken Manure by Various Acids, CSJ West Japan Chemistry Forum 2019, Nov. 2019.
47.	Enghong Liu, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Takaiku Yamamoto and Jhy-Chern Liu : Effect of Acid Eluates on the Recovery Behavior of Phosphorus from Chicken Manure Incineration Ash, CSJ West Japan Chemistry Forum 2019, Nov. 2019.
48.	Kenta Imanishi, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Takaiku Yamamoto and Jhy-Chern Liu : Effect of Acid Eluates on the Production of Phosphate Rock Equivalent from Dephosphorization Slag, CSJ West Japan Chemistry Forum 2019, Nov. 2019.
49.	Kenta Oribe, Tasyu Yoshida, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Dehydrogenation of Isobutane in the Presence of CO2 on Ni-supported Catalysts, CSJ West Japan Chemistry Forum 2019, Nov. 2019.
50.	Kota Aoyagi, Kanami Takenaka, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : 水蒸気吸脱着挙動の改善をめざしたシリコアルミノリン酸塩系ゼオライトの調製, 第33回日本吸着学会研究発表会, Nov. 2019.
51.	Miyu Nomura, Masahiro Katoh, Naohiro Shimoda, Shigeru Sugiyama and Kazuyuki Nakai : ゼオライト膜への二酸化炭素の吸着が透過挙動に与える影響, 第33回日本吸着学会研究発表会, Nov. 2019.
52.	Shigeru Sugiyama, Yasuhiro Sakuwa, Tomoyasu Ogino, Naotaka Sakamoto, Naohiro Shimoda and Masahiro Katoh : Oxidative Epoxidation of Propylene to Propylene Oxide on Various Supported Catalysts, 石油学会山形大会(第49回石油・石油化学討論会), Oct. 2019.
53.	Takuya Ehiro, Satoshi Doshi, Masahiro Katoh and Shigeru Sugiyama : Catalytic Activity and Coking Nature on Calcium Hydroxyapatite for the Oxidative Dehydrogenation of Isobutane, 第28回無機リン化学討論会, Sep. 2019.
54.	Shigeru Sugiyama, En-Hong Liu, Kenta Imanishi, Naohiro Shimoda, Masahiro Katoh, Jhy-Chern Liu and Hidetoshi Sato : Production of Phosphate Rock Equivalent from Incineration Ash of Chicken Manure, 第28回無機リン化学討論会, Sep. 2019.
55.	Tomoe Ueshima, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Pd thin membrane formation by introducing of several ceramic intermediate layers to porous SUS tubes for hydrogen diffusivity enhancement, 化学工学会第84年会, Mar. 2019.
56.	Kenta Oribe, Shino Endo, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Dehydrogenation of Isobutane on Metal-supported γ-Al2O3, 化学工学会第84年会, Mar. 2019.
57.	Yasunori Hayashi, Ikumi Okitsu, Naohiro Shimoda, Masahiro Katoh, Toshihiro Okamoto, Akihiro Furube, Shigeru Sugiyama and Wataru Ninomiya : Effect of Active Oxygen on Catalytic Oxidation of Methane, 化学工学会第84年会, Mar. 2019.
58.	Yasuhiro Sakuwa, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Direct Catalytic Oxidation of propylene to Propylene Oxide, 2018年日本化学会中国四国支部愛媛大会, Nov. 2018. (Summary) 本研究では高難度酸化反応であり，有効な固体触媒の開発が長年の課題となっているプロピレンの直接気相酸化反応からプロピレンを合成する反応に対して種々の銀触媒を用いて検討した．
59.	Kota Aoyagi, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : 水蒸気吸脱着挙動の改善をめざしたシリコアルミノリン酸塩系ゼオライトの酸処理, 第32回日本吸着学会研究発表会, Nov. 2018.
60.	Miyu Nomura, Masahiro Katoh, Naohiro Shimoda, Shigeru Sugiyama and Kazuyuki Nakai : ゼオライト膜への水蒸気もしくはエタノールの吸着ならびに透過挙動を評価する装置の試作, 第32回日本吸着学会研究発表会, Nov. 2018.
61.	Yuki Nakao, Mika Miyake, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Redox Behavior of Bismuth Molybdenum Complex Oxide Catalysts, 石油学会創立60周年記念東京大会(第48回石油・石油化学討論会), Oct. 2018.
62.	Sho Shimazu, Yuki Kato, Wataru Ninomiya, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane on Mesoporous Silicas Treated with a Small Amount of Vanadium, 第122回触媒討論会, Sep. 2018. (Summary) イソブタンの酸化脱水素反応は発熱反応であるので，反応温度を低く設定でき，触媒寿命の向上に期待されるが，COxなどの副生成物生成による選択率低下が問題である．以前はMCM-41などのメソポーラスシリカが用いられていたが，副生成物が多く，イソブテン選択率が10%程となった．触媒中の酸量に着目し，SBA-15触媒を選定したところ，イソブテン選択率が再現良く60%を超えることができた．また，微量のバナジウム修飾を施した結果，イソブテンの高選択性を維持しつつ，イソブテン収率の向上が見られた．
63.	Minoru Moriguchi, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Pd thin membrane formation by introducing of silica powders to porous SUS tubular supports having different pore diameters, 化学工学会第50回秋季大会, Sep. 2018.
64.	Kota Ominami, Hikaru Sugiura, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Preparation of thin palladium membrane on porous SUS tube surface smoothed by introducing of rutile-type titanium powder, 化学工学会第50回秋季大会, Sep. 2018.
65.	Yasunori Hayashi, Kouta Sakuwa, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Epoxidation of propylene on various reduced metal-doping catalysts, 化学工学会第50回秋季大会, Sep. 2018.
66.	Yuki Kato, Shinya Nitta, Kenta Oribe, Wataru Ninomiya, Masahiro Katoh and Shigeru Sugiyama : Industry-University Collaborative Research on the Oxidative Dehydrogenation of Isobutane on SBA-15 Base Catalysts for Methyl Methacrylate (MMA) Synthesis, 化学工学会第50回秋季大会, Sep. 2018.
67.	Kenji Wakisaka, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Fundamental Study on Calcium Phosphate Recovery from Incineration Ash of Chicken Manure, 化学工学会第50回秋季大会, Sep. 2018.
68.	Mika Miyake, Yuki Nakao, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effect of Gaseous Oxygen on Catalytic Conversion of Propylene over Bismuth-molybdenum Complex Oxides, 化学工学会第50回秋季大会, Sep. 2018.
69.	Kenta Oribe, Shinya Nitta, Yuki Kato, Wataru Ninomiya, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane over Binary Catalysts Doped on SBA-15, 化学工学会第50回秋季大会, Sep. 2018.
70.	Yukari Suzuki, Mariko Saito, Naoko Kikuchi, Ayumi Shiotani, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Partial oxidation of real bioethanol to acetaldehyde over Au nano particles supported on several zeolites, 化学系学協会東北大会(秋田), Sep. 2018.
71.	Keizo Nakagawa, Akira Yoshida, Suguru NIshida, Masahiro Katoh, Tomohisa Yoshioka, Hideto Matsuyama and Shigeru Sugiyama : キュービック型メソポーラスシリカ膜で被覆されたPt触媒の触媒活性と構造耐久性, 日本膜学会第40年会, May 2018.
72.	Yui Yamazaki, Yusuke Uchiumi, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Co/CeO2系触媒のエタノール水蒸気改質反応において不純物が及ぼす直接および間接的影響, 第121回触媒討論会, Mar. 2018.
73.	Daiki MIne, Naoto Yamada, Norimasa Yoshida, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura and Shigeru Sugiyama : Elucidation of local boiling heat transfer mechanism of water caused on micro-fabricated SUS heat transfer surface by visualizing flow, 化学工学会第83年会, Mar. 2018.
74.	Ryuta MIyake, Masahiro Katoh, Akihiro Nishii, Yasunori Iwasaki, Toshimitsu Nagao and Shigeru Sugiyama : Preparation of Pd membrane over porous SUS tube using commercial Pd plating reagent, 化学工学会第83年会, Mar. 2018.
75.	Yuki Nakao, Mika Miyake, Masahiro Katoh and Shigeru Sugiyama : Effect of Gaseous Oxygen on Complex Oxides Catalysts Consisting of Bismuth-Molybdenum, 化学工学会第83年会, Mar. 2018.
76.	Kenji Wakisaka, Masahiro Katoh and Shigeru Sugiyama : Recovery of Phosphorus from Composted Chicken Manure using Acidic Treatment, 化学工学会第83年会, Mar. 2018.
77.	Sho Shimazu, Yuki Kato, Wataru Ninomiya, Masahiro Katoh and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane on SBA-15 Modified with Vanadium, 化学工学会第83年会, Mar. 2018.
78.	Yasuhiro Sakuwa, Tomoyasu Ogino, Masahiro Katoh and Shigeru Sugiyama : Gas-Phase Oxidative Epoxidation of Propylene on Metal-Modified SBA-15, 化学工学会第83年会, Mar. 2018.
79.	Kota Horiuchi, Ayaka Satoh, Kota Aoyagi, Masahiro Katoh and Shigeru Sugiyama : アルカリ処理を施したSAPO-34ゼオライトの水蒸気吸脱着挙動, 第31回日本吸着学会研究発表会, Nov. 2017.
80.	Kota Nagai, Yuki Nakao, Mika Miyake, Masahiro Katoh and Shigeru Sugiyama : Behavior of Lattice Oxygen in Bismuth-Molybdenum Complex Oxide Catalysts during the Oxidative Dehydrogenation of Butenes, 石油学会鳥取大会(第47回石油・石油化学討論会), Nov. 2017. (Summary) Recent demand for 1,3-butadiene results in attractive attention to the oxidative dehydrogenation of butenes. Since lattice oxygen in bismuth-molybdenum complex oxide catalysts contributes to the oxidative dehydrogenation, the role of the lattice oxygen should be important. In the present study, the effect of Mo content or partial pressure of oxygen in the feedstream on the oxidative dehydrogenation to find suitable reaction conditions will be presented.
81.	Tomoyasu Ogino, Yasuhiro Sakuwa, Masahiro Katoh and Shigeru Sugiyama : Preparation of Propylene Oxide from the Vapor-phase Partial Oxidation of Propylene on Acidic Solid Catalysts, 2017年日本化学会中国四国支部鳥取大会, Nov. 2017. (Summary) 本研究では，プロピレンと酸素から固体酸触媒を用いて各種化成品原料であるプロピレンオキサイド(PO)を合成について発表する．本研究で取り上げる気相接触部分酸化反応は，従来法と比較すると，環境負荷が小さく簡易なプロセスでPOを合成できる一方で，PO選択率が低いことが問題点となる．触媒の酸特性がPO生成に影響すると考えられたため，ゼオライトを基軸とした固体酸触媒を用いてPO選択率の向上を目的として検討した．さらにメソポーラスシリカであるSBA-15を触媒および担体とすると副生成物の生成が抑えられることについても報告する．
82.	Hikaru Sugiura, Masahiro Katoh and Shigeru Sugiyama : Preparation of thin palladium membrane on porous stainless-steel tube with intermediate layer, 化学工学会第49回秋季大会, Sep. 2017.
83.	Shinya Nitta, Masahiro Katoh, Yuki Kato, Wataru Ninomiya and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane on Mesoporous Silicas Doped with a Trace Amount of Chromium, 化学工学会第49回秋季大会, Sep. 2017.
84.	Yuto Tsuchiya, Masahiro Katoh, Yuka Arai, Yukimi Hayashi, Masamori Akamatsu and Shigeru Sugiyama : Reductive Decomposition of Nitrite on Structural Pd Catalyst Covered with an Intermediate Layer, 化学工学会第49回秋季大会, Sep. 2017.
85.	Sho Shimazu, Yuuki Katou, Hisanobu Misu, Shinya Nitta, Masahiro Katoh, Wataru Ninomiya and Shigeru Sugiyama : Oxidative dehydrogenation of isobutane on mesoporous silicas doped with a trace amount of chromium, 第120回触媒討論会, Sep. 2017. (Summary) イソブタンの酸化脱水素反応について，C3炭化水素の酸化脱水素反応に有効な触媒を用いてもイソブテン収率は2%以下であった．クロムをMCM-41などのメソーポーラスシリカに添加した触媒を用いるとイソブタン収率が8%程度に改善したが，それ以上の改善ができなかった．本発表では，SBA-15に微量のクロムを導入したところ，イソブタン収率が再現良く15%以上を超えることができ，クロムの量が微量なためにクロムの状況が当初不明であったが，XPSやXAFSにより情報が得られる可能性ができたので報告する．
86.	Naotaka Ohtake, Masahiro Katoh and Shigeru Sugiyama : Conversion of Organic Species on Ceria Stable at Higher Temperature, 第33回希土類討論会, May 2017.
87.	Masahiro Takanani, Masahiro Katoh, and Shigeru Sugiyama : Study of preparation condition of silicalite intermediate layer for hydrogen permeation enhancement of palladium membrane over porous SUS tube, 化学工学会第82年会, Mar. 2017.
88.	Naoto Yamada, Daiki Mine, Norimasa Yoshida, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura, and Shigeru Sugiyama : Evaluation of heat performance on micro-fabricated SUS plate with different surface roughness, 化学工学会第82年会, Mar. 2017.
89.	Hiroharu Yamashita, Keizo Nakagawa, Daisuke Saeki, Tomohisa Yoshioka, Takuji Shintani, Masahiro Katoh, Shigeru Sugiyama, Eiji Kamio and Hideto Matsuyama : 吸引ろ過法により作製されたニオブ酸ナノシート積層膜の膜性能に及ぼす作製条件の影響, 化学工学会第82年会, Mar. 2017.
90.	Keizo Nakagawa, Hiroharu Yamashita, Daisuke Saeki, Tomohisa Yoshioka, Takuji Shintani, Masahiro Katoh, Shigeru Sugiyama, Eiji Kamio and Hideto Matsuyama : 二次元チャネル構造を有する金属酸化物ナノシート積層膜の膜性能評価, 化学工学会第82年会, Mar. 2017.
91.	Hisanobu MIsu, , Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Enhanced activity on SBA-15 doped with Cr for oxidative dehydrogenation of isobutane, 化学工学会第82年会, Mar. 2017.
92.	Shinya Nitta, , Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Oxidative dehydrogenation of isobutane on Cr-doped MCM-48, 化学工学会第82年会, Mar. 2017.
93.	, Wataru YOSHIDA, Fukiko KUBOTA, Masahiro GOTO, Masahiro Katoh, Shigeru Sugiyama, Robert CATTRALL and Spas KOLEV : Membrane separtion of divalent metal ions using polymer inclusion membrane cantaining amide acid-type carrier, 日本膜学会膜シンポジウム 2016, Dec. 2016. (Keyword) Membrane / ion exchange / Rare Metal
94.	Hiroharu Yamashita, Daisuke Saeki, Keizo Nakagawa, Takuji Shintaku, Tomohisa Yoshioka, Masahiro Katoh, Shigeru Sugiyama and Hideto Matsuyama : 吸引ろ過法を用いた異なる膜厚さのナノシート積層膜の作製と膜分離性能, 膜シンポジウム2016, Dec. 2016.
95.	, Wataru YOSHIDA, Fukiko KUBOTA, Masahiro GOTO, Masahiro Katoh, Shigeru Sugiyama, Robert CATTRALL and Spas KOLEV : Selective extraction of critical metals using amide acid extractant with phenylalanine moiety and its application to polymer inclusion membrane, 第35回溶媒抽出討論会, Nov. 2016. (Keyword) Solvent Extraction / ion exchange / Rare Metal / rare resources
96.	Shigeru Sugiyama, Yoshiki Yamane, Masahiro Katoh, Yuuki Katou and Wataru Ninomiya : Catalytic Conversion of Glycerin on FSM-16, 石油学会京都大会(第46回石油・石油化学討論会), Nov. 2016.
97.	Kota Horiuchi, Ayaka Satoh, Masahiro Katoh, and Shigeru Sugiyama : アルカリ処理がもたらすシリコアルミノリン酸塩系ゼオライトの水蒸気吸脱着性能の向上, 第30回日本吸着学会研究発表会, Nov. 2016.
98.	, Wataru YOSHIDA, Fukiko KUBOTA, Masahiro GOTO, Masahiro Katoh, Shigeru Sugiyama, Robert CATTRALL and Spas KOLEV : Extraction study of critical metal ions using a polymer inclusion membrane with an amide acid type carrier/extractant, 第32回日本イオン交換研究発表会, Oct. 2016. (Keyword) Solvent Extraction / ion exchange / Rare Metal / rare resources / liquid membrane
99.	Naotaka Ohtake, Masahiro Katoh and Shigeru Sugiyama : Methane Combustion on High Surface Area Ceria with Enhanced Thermal Stability, 第118回触媒討論会, Sep. 2016.
100.	Yuuka Ando, Naoko Kikuchi, Kenta Sawajiri, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : 種々の金属を添加したCo/CeO2系触媒のバイオエタノール水蒸気改質反応特性, 第118回触媒討論会, Sep. 2016.
101.	Hikaru Sugiura, Yusuke Minato, Masahiro Katoh, and Shigeru Sugiyama : Preparation of thin palladium membranes on porous stainless-steel tube with double intermediate layers of silica and alumina, 化学工学会第48回秋季大会, Sep. 2016.
102.	, Wataru Yoshida, Fukiko Kubota, Masahiro Goto, Kolev D. Spas, Cattrall W. Robert, Masahiro Katoh and Shigeru Sugiyama : Mutual separation of Ni, Co, and Mn using polymer inclusion membrane (PIM) containing a extractant with amino acid moieties, 化学工学会第48回秋季大会, Sep. 2016.
103.	Hiroharu Yamashita, Daisuke Saeki, Keizo Nakagawa, Takuji Shintani, Tomohisa Yoshioka, Masahiro Katoh, Shigeru Sugiyama and Hideto Matsuyama : Preparation and Membrane Separation Property of Two Dimensional Nanosheet Membranes Assembled by Vacuum Filtration, 化学工学会第48回秋季大会, Sep. 2016.
104.	Akira Yoshida, Suguru Nishida, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Catalytic Properity and Pt Dropout Suppression of Pt Catalyst Covered with Cubic Mesoporous Silica for 4-Nitrophenol Reduction, 化学工学会第48回秋季大会, Sep. 2016.
105.	Saki Hiraoka, Naoya Motoki, Yuta Honda, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Motinari Adati, Hiroshi Matsuo and Fumio Uchida : Preparation and Eelectric Generation Characteristics of Titanium Oxide Nanosheets/nanoparticles Composites Thin Films for Dye-sensitized Solar Cells, 化学工学会第48回秋季大会, Sep. 2016.
106.	Shinya Nitta, Hisanobu Misu, Takuya Ehiro, , Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Highly Selective Oxidative Dehydrogenation of Isobutane to Isobutene on Mesoporous Silicas, 化学工学会第48回秋季大会, Sep. 2016.
107.	Yuto Tsuchiya, Naozumi Fukushima, , Masahiro Katoh, Shigeru Sugiyama, Yuka Arai, Yukimi Hayashi and Masamori Akamatsu : Reductive Decomposition of Nitrite on Pd Catalyst in Fixed-Bed Continuous Flow Reactor, 化学工学会第48回秋季大会, Sep. 2016.
108.	Tomoyasu Ogino, Naotaka Sakamoto, , Masahiro Katoh and Shigeru Sugiyama : Partial Oxidation of Propylene on MCM-14 Doped with Various Cations, 化学工学会第48回秋季大会, Sep. 2016.
109.	Kenta Sawajiri, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Co/CeO2系触媒のバイオエタノール水蒸気改質反応特性に及ぼす金属修飾効果, 第117回触媒討論会, Mar. 2016.
110.	Masahiro Takatani, Atushi Tenshin, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Preparation of palladium thin membrane over porous SUS tube support introduced double intermediate layers with silicalite and alumina, 化学工学会第81年会, Mar. 2016.
111.	Ayaka Satoh, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Enhancement of water adsorption-desorption performance of AlPO-5 substituted with several metals, 化学工学会第81年会, Mar. 2016.
112.	Yoshiki Tezuka, Megumi Katayama, Takuya Ohshima, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Preparation of CeO2 nanorods covered with CuO layers and improvement of PM combustion activity, 化学工学会第81年会, Mar. 2016.
113.	Masahiro Katoh : パラジウム膜型反応器を用いたオンサイト水素製造プロセスの開発, グリーンイノベーション研究成果企業化促進フォーラム, 73-82, Dec. 2015.
114.	Hiroharu Yamashita, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Synthesis and structural analysis of single layer niobate nanosheets preparaed by a bottom-up approach without exfoliation process, 膜シンポジウム2015, Nov. 2015.
115.	Saki Hiraoka, Naoya Motoki, Yuta Honda, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Motonari Adachi, Hiroshi Matsuo and Fumio Uchida : Effects of TiO2 nanosheets/nanoparticles composites on the electric generation characteristics for thin film of dye-sensitized solar cells, 膜シンポジウム2015, Nov. 2015.
116.	Ayaka Satoh, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : 種々の金属種で置換したアルミノリン酸塩系ゼオライトの水蒸気吸脱着挙動, 第29回日本吸着学会研究発表会, Nov. 2015.
117.	Hisanobu Misu, Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Oxidative dehydrogenation of isobutane on heavy-metal-free mesoporous silica, 第29回日本吸着学会研究発表会, Nov. 2015.
118.	Akira Yoshida, Yuka Arai, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yasuko Kajiwara and Satoka Aoyagi : Design and structural evalution of hydroxyapatite nanoparticles prepared using phosphate surfactant, 第29回日本吸着学会研究発表会, Nov. 2015.
119.	Suguru Nishida, Tomoya Hoshinoo, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Preparation of carbon supported Pt catalysts covered with cubic mesoporous silica layers, 第29回日本吸着学会研究発表会, Nov. 2015.
120.	Yoshiki Tezuka, Megumi Katayama, Takuya Ohshima, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Preparation of CeO2 nanorods covered with CuO layers and low-temperature PM combustion, 第29回日本吸着学会研究発表会, Nov. 2015.
121.	Naozimu Fukushima, Masatomo Fukui, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yukimi Hayashi, Yuka Arai and Masamori Akamatsu : Application of structured catalyst for reductive decomposition of nitrite nitrogen, 第29回日本吸着学会研究発表会, Nov. 2015.
122.	Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : リン酸三カルシウム及びカルシウムヒドロキシアパタイト担持クロミア触媒によるイソブタンの酸化脱水素反応, 第25回無機リン化学討論会, Sep. 2015.
123.	Naotaka Sakamoto, Yuya Nagai, Naotaka Ohtake, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Effect of the Introduction of Ce Species into Binary Bi-Mo-Oxide Catalysts on the Preparation of 1,3-Butadiene, 化学工学会第47回秋季大会, Sep. 2015.
124.	Shigeru Sugiyama, Yusuke Seno, Keizo Nakagawa, Masahiro Katoh, Yuuki katou and Wataru Ninomiya : Organic Synthesis in Microreactor Using Gas-liquid Slug Flow, 化学工学会第47回秋季大会, Sep. 2015.
125.	Keizo Nakagawa, Naoya Motoki, Saki Hiraoka, Masahiro Katoh, Shigeru Sugiyama, Motonari Adachi, Hiroshi Matsuo and Fumio Uchida : Development of thin film for dye-sensitized solar cells using titanium oxide nanosheets prepared by a bottom-up approach, 日本膜学会第37 年会, May 2015.
126.	Takashi Saito, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : 種々な方法で調製したCo系触媒によるバイオエタノールからのプロピレン合成反応特性, 第115回触媒討論会, Mar. 2015.
127.	Norimasa Yoshida, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura, Keizo Nakagawa and Shigeru Sugiyama : Boiling Heat Transfer Enhancement by using Micro-fabricated Plate Surface, 化学工学会第80年会, Mar. 2015.
128.	Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama and Shik Chi Edman Tsang : Preparation of Single Layer Niobate Nanosheets Photocatalysts by A Bottom-Up Approach and Hydrogen Evolution from Water/Methanol Solution, SCEJ 80th Annual Meeting, Mar. 2015.
129.	Naotaka Ohtake, Yoshiki Yamane, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Hydrothermal synthesis and catalytic reaction on alcohol dehydration of high surface area ceria, 化学工学会第80年会, Mar. 2015.
130.	Takuya Ehiro, Hisanobu Misu, Masashi Kurashina, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Improvement of the Catalytic Activity on MCM-41 for Oxidative Dehydrogenation of Isobutane, 化学工学会第80年会, Mar. 2015.
131.	Ai Itagaki, Masashi Kurashina, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Characterization and Catalytic Activity for Oxidative Dehydrogenation of Isobutane on Cr-FSM-16 Catalyst Prepared Using Ion Exchange Method, 化学工学会第80年会, Mar. 2015.
132.	Ayaka Satoh, 木村三千里, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : アルカリ処理によるメソ孔導入がもたらすZSM-5系ゼオライトの水蒸気吸脱着性能の向上, 第28回日本吸着学会研究発表会講演要旨集, 59, Oct. 2014.
133.	Ryuta Kitora, Haruka Kinoshita, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama and Kiyohiko Nakasaki : コンポスト化鶏糞からのリン資源回収の再検討と流通操作の試み, 第24回無機リン化学討論会, Sep. 2014.
134.	Takashi Saito, Naoko Kikuchi, Yusuke Watanabe, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : バイオエタノールからのプロピレン合成に及ぼすCo系触媒の担体複合化の効果, 化学系学協会東北大会(米沢), Sep. 2014.
135.	Shota Saito, Naoko Kikuchi, Masato Shikano, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Co/CeO2系触媒によるバイオエタノール水蒸気改質反応に及ぼす担体物性の影響, 化学系学協会東北大会(米沢), Sep. 2014.
136.	Naoya Motoki, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Motonari Adachi and Fumio Uchida : Electric Generation Characteristics of Dye-Sensitized Solar Cells Using Layered Titanate Nanosheets, 化学工学会第46回秋季大会, Sep. 2014.
137.	Ai Itagaki, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki katou and Wataru Ninomiya : Effect of the Ion-exchange Behavior of Cr Cation into FSM-16 on the Oxidative Dehydrogenation of Isobutane, 化学工学会第46回秋季大会, Sep. 2014.
138.	Yuusuke Watanabe, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Co-Pt 系混合触媒によるバイオエタノールからのプロピレン合成に及ぼす添加物の効果, 第113回触媒討論会(触媒討論会A), Mar. 2014.
139.	Shigeru Sugiyama, Yasuhiro Okada, Yoshiki Yamane, Keizo Nakagawa, Masahiro Katoh, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : FSM-16の酸性質，構造および1,2-プロパンジオールの脱水触媒活性への触媒調製法の影響, 第113回触媒討論会(触媒討論会A), Mar. 2014.
140.	Seiya Nii, Arisa Ishii, Tomoya Hoshinoo, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Challenge of preparation of thin Pd membrane on porous stainless steel support by introduction of siliceous intermediate layer, 化学工学会第79年会, Mar. 2014.
141.	Ai Itagaki, Yoshihisa Nitta, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : Oxidation of Isobutane on FSM-16 Doped with Cr and the Characterization of the Catalysts, 化学工学会第79年会, Mar. 2014.
142.	木村三千里, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : IR法によるアルミノリン酸塩系ゼオライトの水蒸気脱離性能の評価, 第27回日本吸着学会研究発表会講演要旨集, 31, Nov. 2013.
143.	Takuya Ehiro, Ai Itagaki, Yoshihisa Nitta, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : The Oxidative Dehydrogenation of Various Alkanes on FSM-16 Doped with Chromium and Related Catalysts, 石油学会北九州大会(第43回石油・石油化学討論会), Nov. 2013.
144.	Yuusuke Watanabe, Kaori Onodera, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Pt系触媒による実バイオエタノールからのプロピレン生成選択性及ぼす遷移金属添加効果, 第112回触媒討論会(触媒討論会A), Sep. 2013.
145.	Yuka Arai, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yasuko Kajiwara and Satoka Aoyagi : ハイドロキシアパタイトのナノ構造設計に及ぼすリン系界面活性剤の鋳型効果, 第23回無機リン化学討論会, Sep. 2013.
146.	Ryuta Kitora, Ippei Shinomiya, Haruka Kinoshita, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama and Kiyohiko Nakasaki : コンポスト化鶏糞からのリン資源回収, 第23回無機リン化学討論会, Sep. 2013.
147.	Mao Sugino, Ayaka Satoh, Michisato Kimura, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Water adsorption behavior of Alkali treated USY zeolites, 化学工学会第45回秋季大会, Sep. 2013.
148.	Atushi Tenshin, Oshie Tsuji, Kyosuke Matsutani, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Ethanol separation from the aqueous solution by pervaporation using several hydrophobic MFI-type zeolite membranes, 化学工学会第45回秋季大会, Sep. 2013.
149.	Seiya Nii, Kouji Kinouchi, Arisa Ishii, Yusuke Kitahara, Masahiro Katoh, Keizo Nakagawa, Shigeru Sugiyama, Takushi Yoshikawa and Mamoru Wada : Steam-reforming of bio-ethanol using Pd membrane reactors supported on 3 kinds of porous stainless steel tubes, 化学工学会第45回秋季大会, Sep. 2013.
150.	Tomoya Hoshinoo, Suguru Nishida, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Degradation Behavior and Effects of Silica Coverage of Carbon Supported Pd Catalysts for Dehydrogenation at High Reaction Temperature, 化学工学会第45回秋季大会, Sep. 2013.
151.	Ippei Shinomiya, Ryuta Kitora, Haruka Kinoshita, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Elution and Recovery of Phosphate from Used Fluorescent Tube, 化学工学会第45回秋季大会, Sep. 2013.
152.	Yusuke Seno, Takuya Bando, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Synthesis of Methyl Propionate from Propionaldehyde Using Palladium Catalysts, 化学工学会第45回秋季大会, Sep. 2013.
153.	Takuya Ehiro, Ai Itagaki, Yoshihisa Nitta, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : The Oxidative Dehydrogenation of Methane, Ethane, Propane abd iso-Butane on FSM-16 Doped with Chromium, 石油学会第56回年会(第62回研究発表会), May 2013.
154.	kaori Onodera, Naoko Kikuchi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Co系およびPt系担持触媒による実バイオエタノールからのプロピレン生成反応特性, 第111回触媒討論会(触媒討論会A), Mar. 2013.
155.	Toshihide Horikawa, Noriyuki Sakao, Jun'ichi Hayashi, Masahiro Katoh and Ken-Ichiro Sotowa : 窒素ドープ炭素吸着剤の調製とその水蒸気吸着挙動, 化学工学会第78年会, Mar. 2013.
156.	Masahiro Katoh, Michisato Kimura, Mao Sugino, Keizo Nakagawa and Shigeru Sugiyama : 水蒸気の拡散性向上をめざしたY型ゼオライトの改質と水蒸気吸脱着挙動の評価, 化学工学会第78年会, Mar. 2013.
157.	Jun Jitoku, Toshimasa Ogata, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Effects of A Lamellar Mesostructure Formation on Their Photocatalytic Decomposition for Titanate Nanosheets photocatalysts, 化学工学会第78年会, Mar. 2013.
158.	Ippei Shinomiya, Yuta Kitora, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Elution Behavior of Aqueous Phosphate from Dephosphorization Slag by Wet Treatment and Enrichment of the Phosphate by Elimination of Contaminant, 化学工学会第78年会, Mar. 2013.
159.	Yoshihisa Nitta, Yukimi Furukawa, Ai Itagaki, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Oxidative Dehydrogenation of Isobutane on Various Solid Catalysts, 化学工学会第78年会, Mar. 2013.
160.	Yasuhiro Okada, Yohei Kosaka, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Preparation of Propionaldehyde from 1,2-Propandiol on FSM-16, 化学工学会第78年会, Mar. 2013.
161.	Yusuke Kitahara, Kouji Kinoushi, Masahiro Katoh, Toshihide Horikawa, Keizo Nakagawa and Shigeru Sugiyama : 多孔質ステンレスチューブへのPd-Cu合金膜の製膜, 化学工学会高松大会, Dec. 2012.
162.	Megumi Katayama, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Preparation of CeO2-CuO composite nanorods using hydrothermal synthesis and thier oxidative catalytic activity, 化学工学会高松大会, Dec. 2012.
163.	Satoshi Kubota, Toshihide Horikawa, Ken Yoshida, Masahiro Katoh and Ken-Ichiro Sotowa : NMRを用いたナノ粒子近傍分子の動的挙動観察と粒子相間移動メカニズムの検討, 化学工学会高松大会, Dec. 2012.
164.	木村三千里, Masahiro Katoh, Toshihide Horikawa, Keizo Nakagawa and Shigeru Sugiyama : アルカリ処理を施したY型ゼオライトへの水蒸気吸着の温度依存性, 第26回日本吸着学会研究発表会講演要旨集, 44, Nov. 2012.
165.	Chihiro Sugawara, Naoko Kikuchi, Yoshie Takahashi, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Co/CeO2系触媒のバイオエタノール水蒸気改質反応特性に及ぼすCo担持状態の影響, 第110回触媒討論会(触媒討論会A), Sep. 2012.
166.	Ippei Shinomiya, Ryuta Kitora, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Recovery of Phosphate from Dephosphorization Slag Using Batch and Flow Systems and Removal of Iron Species with Apatite, 第22回無機リン化学討論会, Sep. 2012.
167.	Tomoya Hoshinoo, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Preparation of Pd Nanoparticles Covered with Organosilica Layers and Catalytic Properties for Cyclohexane Dehydrogenation, 第110回触媒討論会(触媒討論会A), Sep. 2012.
168.	Keizo Nakagawa, Kazuki Yamaguchi, Keiji Yamada, Mizuka Chujo, Ken-Ichiro Sotowa, Shigeru Sugiyama and Masahiro Katoh : Surface Modification and Photocatalytic Properties of Layered Titanate Nanosheets Using Lamellar Self-Assembly as a Template, 第110回触媒討論会(触媒討論会A), Sep. 2012.
169.	Kouji Kinouchi, Tatsuya Kakiuchi, Arisa Ishii, Yusuke Kitahara, Masahiro Katoh, Toshihide Horikawa, Keizo Nakagawa, Shigeru Sugiyama, Takushi Yoshikawa and Mamoru Wada : Pd膜型反応器を用いたバイオエタノールの水蒸気改質反応における操作条件の検討, 化学工学会第44回秋季大会, Sep. 2012.
170.	Arisa Ishii, Kouji Kinouchi, Tatsuya Kakiuchi, Yusuke Kitahara, Masahiro Katoh, Toshihide Horikawa, Keizo Nakagawa and Shigeru Sugiyama : 製法の異なるPSS支持体に製膜されたPd膜を用いたエタノールのスチームリフォーミング, 化学工学会第44回秋季大会, Sep. 2012.
171.	Keizo Nakagawa, Megumi Katayama, Takuya Ohshima, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : 炭酸セリウムを経由したロッド状セリアナノ粒子の調製とメタン及び炭素燃焼特性, 化学工学会第44回秋季大会, Sep. 2012.
172.	Takuya Ohshima, Megumi Katayama, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : セリアナノロッドの酸化触媒活性に及ぼす各種金属ナノ粒子担持効果, 化学工学会第44回秋季大会, Sep. 2012.
173.	Jun Jitoku, Mizuka Chujo, Kazuki Yamaguchi, Keizo Nakagawa, Ken-Ichiro Sotowa, Shigeru Sugiyama and Masahiro Katoh : ラメラ相鋳型を利用した八面体アナターゼTiO2結晶のワンステップ水熱合成, 化学工学会第44回秋季大会, Sep. 2012.
174.	Takuya Bando, Emiko Watanabe, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : パラジウム触媒によるプロピオンアルデヒドの酸化的エステル化反応に対する担体効果, 化学工学会第44回秋季大会, Sep. 2012.
175.	Kaori Onodera, Naoko Kikuchi, Toshifumi Mikami, Chihiro Sugawara, Tatsuya Yamazaki, Masahiro Katoh, Takushi Yoshikawa and Mamoru Wada : Effects of metals supported on porous catalysts on selectivity for light olefins formation from bio-ethanol, 化学系学協会東北大会, Sep. 2012.
176.	菅原ちひろ, 高橋芳恵, 菊池尚子, 山崎達也, Masahiro Katoh, 吉川卓志 and 和田守 : 有機酸法によって調製したCo/CeO2触媒による実バイオエタノール水蒸気改質反応特性, 第109回触媒討論会, Mar. 2012.
177.	辻おしえ, 中田恵梨佳, Masahiro Katoh, Toshihide Horikawa, 山崎達也, 吉川卓志 and 和田守 : 二酸化チタン光触媒によるバイオエタノールからの水素生成に及ぼす微量成分の影響, 第109回触媒討論会, Mar. 2012.
178.	Masahiro Katoh : IR法による多孔質材料の水蒸気吸脱着挙動の迅速評価, 第4回3支部合同福井大会技術シーズフォーラム, Dec. 2011.
179.	Masahiro Katoh, 吉田貴則, 山田健三 and Toshihide Horikawa : 赤外分光法による水蒸気吸着材上での水蒸気および臭気成分の吸着挙動解析, 第25回日本吸着学会研究発表会講演要旨集, 66, Nov. 2011.
180.	菅原ちひろ, 鈴木絢子, 菊池尚子, 高橋芳恵, 山崎達也, Masahiro Katoh, 吉川卓志 and 和田守 : 有機酸を利用して調製したCo/CeO2触媒によるバイオエタノール水蒸気改質反応特性, 第108回触媒討論会, Sep. 2011.
181.	垣内達也, 木内浩二, 三宅孝宏, Masahiro Katoh and Toshihide Horikawa : 膜型反応器を用いたバイオエタノールの水蒸気改質におけるPd膜の水素透過性, 化学工学会第43回秋季大会, Sep. 2011.
182.	Daisuke Nakahara, Takuma Hasegawa, Toshihide Horikawa and Masahiro Katoh : 水蒸気吸着用塩添着メソポーラス炭素材料の調製と塩添着方法の検討, 化学工学会第43回秋季大会, Sep. 2011.
183.	Noriyuki Sakao, Toshihide Horikawa, Masahiro Katoh and Jun'ichi Hayashi : 含窒素多孔質炭化物の表面特性とその水蒸気吸着特性, 化学工学会第43回秋季大会, Sep. 2011.
184.	久保真太郎, Daisuke Yonekura, Ri-ichi Murakami, 大西賢治 and Masahiro Katoh : 表面研磨処理を施した鋼板表面へのシリカ粉体の付着・堆積挙動に関する研究, 日本機械学会2011年度年次大会, Sep. 2011.
185.	辻おしえ, Masahiro Katoh, Toshihide Horikawa, 山崎達也, 吉川卓志 and 和田守 : ガラスビーズに担持した二酸化チタン光触媒を用いたバイオエタノールからの水素生成, 第107回触媒討論会, Mar. 2011.
186.	鈴木絢子, 菊池尚子, 高橋芳恵, 山崎達也, Masahiro Katoh, 吉川卓志 and 和田守 : Co/CeO2系触媒の実バイオエタノール水蒸気改質反応に及ぼす添加剤の効果, 第107回触媒討論会, Mar. 2011.
187.	Noriyuki Sakao, Toshihide Horikawa, Masahiro Katoh and Jun'ichi Hayashi : 窒素含有多孔質炭素材料の製造とその水蒸気吸着特性, 化学工学会第76年会, Mar. 2011.
188.	Daisuke Nakahara, Takuma Hasegawa, Toshihide Horikawa and Masahiro Katoh : 塩添着メソポーラス炭素材料の調製とその水蒸気吸着特性, 化学工学会第76年会, Mar. 2011.
189.	Takahiro Maegaki, Yuuta Kinouchi, Toshihide Horikawa and Masahiro Katoh : 酸化物ナノ粒子の相間移動に伴う相平衡変化, 化学工学会第76年会, Mar. 2011.
190.	Masahiro Katoh, 吉田貴則, 山田健三 and Toshihide Horikawa : Y型ゼオライトへ吸着した水のIR測定による温度挙動解析, 第24回日本吸着学会研究発表会講演要旨集, 54, Nov. 2010.
191.	三宅孝宏, 木内浩二, Masahiro Katoh and Toshihide Horikawa : 製法の異なるポーラスステンレススチール支持体に製膜されたPd膜の水素透過性能, 第3回化学工学3支部合同徳島大会要旨集, 109, Oct. 2010.
192.	鈴木絢子, 菊池尚子, 門馬政利, 山崎達也, Masahiro Katoh, 吉川卓志 and 和田守 : 様々な金属で修飾されたCo/CeO2系触媒によるバイオエタノール水蒸気改質反応, 平成22年度化学系学協会東北大会, Sep. 2010.
193.	三上寿文, 菊池尚子, 山崎達也, Masahiro Katoh, 吉川卓志 and 和田守 : 金属添加MFI触媒によるバイオエタノールからの芳香族生成特性, 第106回触媒討論会, Sep. 2010.
194.	木内浩二, 西原克矩, 三宅孝宏, Masahiro Katoh and Toshihide Horikawa : 多孔性SUS管へ製膜したPd膜型反応器を用いたメタンのスチームリフォーミング, 化学工学会第42回秋季大会, Sep. 2010.
195.	Tomoki Sekida, Toshihide Horikawa, Masahiro Katoh and Jun'ichi Hayashi : 炭化物の表面・細孔特性が水蒸気吸着に及ぼす影響, 化学工学会第75年会, B204, Mar. 2010.
196.	Kagehira Kohji, , Mori Narisuke, Masahiro Katoh and Toshihide Horikawa : 二酸化チタン光触媒と活性炭繊維の複合化による新規機能性材料の開発, 第105回触媒討論会, Mar. 2010.
197.	, 影平晃司, 森得祐, Masahiro Katoh and Toshihide Horikawa : TiO2を担持した活性炭粉末複合光触媒の調製および特性評価, 第105回触媒討論会, Mar. 2010.
198.	, 影平晃司, 森得祐, Masahiro Katoh and Toshihide Horikawa : TiO2を担持した活性炭粉末複合光触媒の調製および特性評価, 第105回触媒討論会, Mar. 2010.
199.	馬場雄三, 影平晃司, 森得祐, Masahiro Katoh and Toshihide Horikawa : TiO2を担持した活性炭粉末複合光触媒の調製および特性評価, 第105回触媒討論会, Mar. 2010.
200.	Ying Sheng, Kouji Kagehira, Akihiro Imayama, Masahiro Katoh and Toshihide Horikawa : Degradation of waste water using photoreactor packed with TiO2 doped with S, N immobilized on glass beads, 第105回触媒討論会, Mar. 2010.
201.	影平晃司, 馬場雄三, 森得祐, Masahiro Katoh and Toshihide Horikawa : 二酸化チタン光触媒と活性炭繊維の複合化による新規機能性材料の開発, 第105回触媒討論会, Mar. 2010.
202.	門馬政利, 菊池尚子, 山崎達也, Masahiro Katoh, 吉川卓志 and 和田守 : 実バイオエタノール水蒸気改質反応におけるCo/CeO2系触媒の反応特性, 第105回触媒討論会, Mar. 2010.
203.	山田健三, 吉田貴則, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 臭気発生を抑えた水蒸気吸着用イオン交換ゼオライトの探索, 第23回日本吸着学会研究発表会, Nov. 2009.
204.	吉田貴則, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 臭気成分脱離の抑制をめざした水蒸気吸着材の探索, 第23回日本吸着学会研究発表会, Nov. 2009.
205.	Toshihide Horikawa, Yoshiyuki Kitakaze, Tomoki Sekida, Masahiro Katoh and Jun'ichi Hayashi : 竹活性炭の製造とその表面・細孔特性および水蒸気吸着能評価, 第2回化学工学3支部合同北九州大会, 31, Oct. 2009.
206.	山崎達也, 菊池尚子, Masahiro Katoh, 吉川卓志 and 和田守 : Fe-MFI系触媒上での実バイオエタノールからの低級オレフィン合成反応機構, 第104回触媒討論会, Sep. 2009.
207.	菊池尚子, 門馬政利, 山崎達也, Masahiro Katoh, 吉川卓志 and 和田守 : Pt/CeO2触媒による実バイオエタノールの水蒸気改質反応-反応に及ぼすエタノール精製度の影響-, 第104回触媒討論会, Sep. 2009.
208.	西原克矩, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : Pd膜型反応器を用いたメタンのドライリフォーミングの最適操作条件の検討, 化学工学会第41回秋季大会, Sep. 2009.
209.	木内浩二, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : PtもしくはNi触媒を充填したPd膜型反応器によるメタンのドライリフォーミング, 化学工学会第41回秋季大会, Sep. 2009.
210.	山崎達也, 菊池尚子, Masahiro Katoh, 吉川卓志 and 和田守 : 種々の金属を助触媒としたFe-MFI触媒による実バイオエタノールからのオレフィン合成反応特性, 第103回触媒討論会A予稿集, 138, Mar. 2009.
211.	小飛山明実, 山崎達也, 菊池尚子, Masahiro Katoh, 吉川卓志 and 和田守 : 種々の金属を添加したPt/CeO2触媒のバイオエタノール水蒸気改質反応特性, 日本化学会第89春季年会講演予稿集, 2M1-49, Mar. 2009.
212.	Toshihide Horikawa, Takahiro Maegaki, Masahiro Hoshi, Masahiro Katoh, Tahei Tomida and Yoshikazu Miyake : 酸化物ナノ粒子の液液抽出による分級, 化学工学会第74年会, I317, Mar. 2009.
213.	Toshihide Horikawa, Kazuhide Akiyama, Hiroyuki Asano, Masahiro Katoh and Tahei Tomida : CVD法による酸化チタン薄膜構成粒子の生成と成長, 化学工学会第74年会講演要旨集, I207, Mar. 2009.
214.	Ayumi Yoshioka, Toshihide Horikawa, Ayaka Uzaki, Masahiro Katoh and Tahei Tomida : 透明性多孔質光触媒薄膜の調製とその性能評価, 化学工学会姫路大会2008, 90, Nov. 2008.
215.	Hirotoshi Iuchi, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : トリブロックコポリマーを用いたメソポーラスチタニア薄膜の調製とその特性評価, 化学工学会姫路大会2008, 89, Nov. 2008.
216.	伊藤信成, Masahiro Katoh and 岡野伸章 : 地球観測センサに見られる信号劣化現象の原因解明への取り組み, 第52回宇宙科学技術連合講演会, Nov. 2008.
217.	吉田貴則, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 臭気発生の低減をめざしたゼオライト系水蒸気吸着材の探索, 第22回日本吸着学会研究発表会, Oct. 2008.
218.	Masahiro Katoh, 長濱宏一, Toshihide Horikawa and Tahei Tomida : パラジウム膜型反応器を用いたメタンのドライリフォーミングによる水素製造, 化学工学会第40回秋季大会, Sep. 2008.
219.	小飛山明実, 山崎達也, 大井真, 菊地尚子, Masahiro Katoh, 吉川卓志 and 和田守 : アルカリ土類金属で修飾されたPt/CeO2系触媒のバイオエタノール水蒸気改質反応特性, 第102回触媒討論会A予稿集, Sep. 2008.
220.	Masahiro Katoh, 菊地尚子, 山崎達也, 吉川卓志 and 和田守 : 種々の金属を担持したMFIゼオライトによる実バイオエタノールからのC3およびC4オレフィンの選択的合成, 第102回触媒討論会A予稿集, Sep. 2008.
221.	伊藤信成, Masahiro Katoh and 岡野伸章 : ガス吸着に伴う衛星光学系の透過率低下の検証, (社)日本リモートセンシング学会第44回学術講演会論文集, 7-8, May 2008.
222.	Masahiro Katoh, 岡田佳枝, 菊池尚子, 山崎達也, 吉川卓志 and 和田守 : Ni-BEA触媒によるバイオエタノールからのオレフィン合成反応, 第101回触媒討論会討論会A予稿集, Mar. 2008.
223.	大井真, 山崎達也, Masahiro Katoh, 菊池尚子, 吉川卓志 and 和田守 : Pt/CeO2系触媒によるバイオエタノールの水蒸気改質反応, 第101回触媒討論会討論会A予稿集, Mar. 2008.
224.	Hiroyuki Asano, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 流通式CVD法による酸化チタン薄膜の創製, The 73rd Annual Meeting, SCEJ, O309, Mar. 2008.
225.	Toshihide Horikawa, Masahiro Hoshi, Masahiro Katoh, Tahei Tomida and Yoshikazu Miyake : マグネタイトナノ粒子の液液抽出による分級を目指した基礎的研究, The 73rd Annual Meeting, SCEJ, C207, Mar. 2008.
226.	Masashi Kajikawa, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 竹-RF樹脂を原料としたカーボンクライオゲルの調製, 第10回化学工学会学生発表会大阪大会(西日本地区), 96, Mar. 2008.
227.	Tomoki Sekida, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 第1級アミンを用いたRFカーボンクライオゲルの製造, 第10回化学工学会学生発表会大阪大会(西日本地区), 95, Mar. 2008.
228.	Ayaka Uzaki, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 吸着能を有する透明性光触媒薄膜の調製とその特性評価, 第10回化学工学会学生発表会大阪大会(西日本地区), 18, Mar. 2008.
229.	木内浩二, 長濱宏一, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 触媒充填型パラジウム膜反応器によるメタンのドライリフォーミング, 第10回化学工学会学生発表会大阪大会(西日本地区), 38, Mar. 2008.
230.	西原克矩, 長濱宏一, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : パラジウム膜による水素分離への一酸化炭素の影響, 第10回化学工学会学生発表会大阪大会(西日本地区), 35, Mar. 2008.
231.	今山章宏, 森得祐, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 異なるpH条件下で調製したN,F含有二酸化チタンの光触媒特性, 第10回化学工学会学生発表会大阪大会(西日本地区), 19, Mar. 2008.
232.	Shoji Nagahata, Yuko Yamakawa, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : La-doped TiO2光触媒薄膜の調製とその特性評価, 化学工学会山口大会要旨集, 47, Nov. 2007.
233.	Yu Nagaoka, Shizuka Tsuduki, Hidemi Azuma, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : La-doped TiO2光触媒の調製とその特性評価, 化学工学会山口大会要旨集, 46, Nov. 2007.
234.	Masahiro Hoshi, Toshihide Horikawa, Masahiro Katoh, Tahei Tomida and Yoshikazu Miyake : 液液抽出によるナノ粒子分級を目指した基礎的研究, 化学工学会山口大会要旨集, 22, Nov. 2007.
235.	Hiroyuki Asano, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 超音波を利用したCVD法によるTiO2薄膜創製, 化学工学会山口大会要旨集, 20, Nov. 2007.
236.	Kensuke Kashu, Mohamed Reda Berber, Keiji Minagawa, Masahiro Katoh and Masami Tanaka : Preparation of new nanocomposite materials based on layered double hydroxide (II), 第15回プラスチック成形加工学会秋季大会, Nov. 2007.
237.	Mohamed Reda Berber, Kensuke Kashu, Keiji Minagawa, Masahiro Katoh and Masami Tanaka : Preparation of new nanocomposite materials based on layered double hydroxide (I), 第15回プラスチック成形加工学会秋季大会, Nov. 2007.
238.	森得祐, 福本祐介, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : N,S含有二酸化チタンの液相合成に及ぼすpHの影響, 2007年日本化学会西日本大会講演要旨集, 213, Nov. 2007.
239.	Mohamed Reda Berber, Kensuke Kashu, Keiji Minagawa, Masahiro Katoh and Masami Tanaka : Optimization of urea method for the preparation of Mg-Al layered double hydroxide, 2007年日本化学会西日本大会, Nov. 2007.
240.	Masahiro Katoh, 小田倫義, Toshihide Horikawa and Tahei Tomida : 水蒸気吸着材の吸着特性と臭気発生メカニズムの解明, 第21回日本吸着学会研究発表会講演要旨集, 14, Sep. 2007.
241.	山崎達也, Masahiro Katoh, 菊池尚子, 大井真, 高橋芳恵, 吉川卓志 and 和田守 : Pt系触媒によるバイオエタノール水蒸気改質反応に及ぼす担体効果, 第100回触媒討論会討論会A予稿集, 38, Sep. 2007.
242.	Toshihide Horikawa, Takashi Isoda, Masahiro Katoh and Tahei Tomida : ディップコーティング法による酸化チタン薄膜形成に及ぼす対流の影響, 化学工学会第39回秋季大会, I218, Sep. 2007.
243.	長濱宏一, Masahiro Katoh, 坂田悦美, Toshihide Horikawa and Tahei Tomida : パラジウム膜による水素分離への共存気体の影響, 化学工学会第39回秋季大会, C116, Sep. 2007.
244.	石川尚子, 山崎達也, 増田豊子, Masahiro Katoh, 吉川卓志 and 和田守 : Pt系担持触媒によるバイオエタノールの水蒸気改質反応特性, 第99回触媒討論会討論会A予稿集, 15, Mar. 2007.
245.	坂田悦美, 長濱宏一, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 水素製造過程で生じる混合ガスからのパラジウム膜による水素精製, 化学工学会徳島大会講演要旨集, 64, Oct. 2006.
246.	福本祐介, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 窒素とフッ素を含む可視光応答型光触媒の調製と光触媒特性, 化学工学会徳島大会講演要旨集, 92, Oct. 2006.
247.	Hirotoshi Iuchi, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 窒素ドープ多孔質酸化チタンの創製とその特性評価, 化学工学会徳島大会講演要旨集, 99, Oct. 2006.
248.	Takashi Isoda, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : ディップコーティングによるTiO2薄膜形成に及ぼす諸因子の影響, 化学工学会徳島大会講演要旨集, 100, Oct. 2006.
249.	板持正和, 金明吉, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : ベンチスケール環状充填型光触媒反応器における染料の分解特性, 化学工学会徳島大会講演要旨集 61頁, Oct. 2006.
250.	長岡優, 西計臣, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 二酸化チタン光触媒の調製とメチレンブルー分解による性能評価, 化学工学会徳島大会講演要旨集 94頁, Oct. 2006.
251.	長畠祥司, 坂田万典, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : La含有の膜状二酸化チタン光触媒の調製と特性評価, 化学工学会徳島大会講演要旨集 93頁, Oct. 2006.
252.	山崎達也, 増田豊子, 石川尚子, Masahiro Katoh, 吉川卓志 and 和田守 : Ru/ZrO2系触媒によるバイオエタノールの水蒸気改質反応, 第98回触媒討論会討論会A予稿集, 64, Sep. 2006.
253.	Masahiro Katoh, 石川尚子, 山崎達也, 吉川卓志 and 和田守 : 金属添加MFIゼオライトによるバイオエタノールからのオレフィン合成反応, 第98回触媒討論会討論会A予稿集, 30, Sep. 2006.
254.	Masahiro Katoh, 天堤慎也, Toshihide Horikawa, Tahei Tomida and 大平学 : 地域のバイオマスを原料とする炭を分散した塗料によるガスの吸着除去, 第20回日本吸着学会研究発表会講演要旨集, 44, Sep. 2006.
255.	Masahiro Katoh : 光触媒表面で起こる吸着現象の赤外分光法による解析, 第20回日本吸着学会研究発表会講演要旨集, 5-6, Sep. 2006.
256.	Takashi Isoda, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 窒素含有TiO2薄膜の創製と特性評価, SCEJ 38th Autumn Meeting (Fukuoka, 2006), A206, Sep. 2006.
257.	Masahiro Hoshi, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 磁性体含有多孔質シリカ-ニ酸化チタン光触媒の創製, 第8回化学工学会学生発表会, 90, Mar. 2006.
258.	Shoji Nagahata, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 紫外線LEDを用いたメチレンブルー分解による二酸化チタン光触媒の性能評価, 第8回化学工学会学生発表会, 85, Mar. 2006.
259.	Yu Nagaoka, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : メチレンブルー分解による二酸化チタン光触媒の性能評価, 第8回化学工学会学生発表会, 84, Mar. 2006.
260.	Masaki Kakiuchi, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 二酸化チタン光触媒によるアセトアルデヒドの分解速度, 第8回化学工学会学生発表会, 83, Mar. 2006.
261.	Chiyo Sakitani, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : TiO2/Fe3O4/SiO2微粒子によるメチレンブルーの吸着・光分解特性, 第8回化学工学会学生発表会, 77, Mar. 2006.
262.	Shinya Amatsuji, Yusuke Fukumoto, Nobuaki Okano, Masahiro Katoh, Toshihide Horikawa, Tahei Tomida and Manabu Taihei : バイオマスを原料とした塗料の吸着試験, 第8回化学工学会学生発表会, 76, Mar. 2006.
263.	Kohichi Chohama, 尊藤聡, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 多孔性ステンレススチール管へのパラジウムのめっき法の検討, 第8回化学工学会学生発表会, 75, Mar. 2006.
264.	Akihiko Ihara, Etsuko Sakata, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 多孔性ステンレススチール管を支持体としたパラジウム膜とパラジウム/銀合金膜の製膜, 第8回化学工学会学生発表会, 10, Mar. 2006.
265.	福本祐介, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : ハロゲンと窒素を含むチタニアの調製と光触媒特性, 第12回ヤングセラミストミーティングin中四国要旨集, 17-18, Nov. 2005.
266.	Masakazu Itamochi, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : ベンチスケール環状充填型光触媒反応器における藍染料の分解特性, 関西地区3学協会合同大会講演要旨集, 149, Nov. 2005.
267.	Yusuke Fukumoto, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 窒素とハロゲンを共ドープした酸化チタン可視光応答型光触媒の調製と光触媒特性, 関西地区3学協会合同大会講演要旨集, 141, Nov. 2005.
268.	Takashi Isoda, Toshihide Horikawa, Tahei Tomida and Masahiro Katoh : ディップコーティング法による窒素含有TiO2薄膜の創製, 関西地区3学協会合同大会講演要旨集, 137, Nov. 2005.
269.	Masahiro Katoh, 山崎達也, 石川尚子, 岡田佳枝, 吉川卓志 and 和田守 : メタロシリケート触媒によるバイオエタノールからのガソリン合成, 第96回触媒討論会討論会A予稿集, 74, Sep. 2005.
270.	Masahiro Katoh, Hironori Aihara, Toshihide Horikawa and Tahei Tomida : 硫黄と窒素を含むチタニア光触媒による有機物分解過程の分光学的解析, SCEJ 37th Autumn Meeting, #C316, Sep. 2005.
271.	Toshihide Horikawa, Daisuke Ichimiya, Masahiro Katoh, Tahei Tomida, Yoshikazu Miyake and Jun'ichi Hayashi : マグネタイト含有多孔質シリカ微粒子の製造, SCEJ 37th Autumn Meeting, #C318, Sep. 2005.
272.	Masakazu Itamochi, Yoshimoti Hama, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 環状型光触媒反応器における藍染料の分解特性, SCEJ 37th Autumn Meeting, #J123, Sep. 2005.
273.	Takahito Ichimaru, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 環状型光触媒反応器における揮発性有機物質の分解, SCEJ 37th Autumn Meeting, #J122, Sep. 2005.
274.	Masahiro Katoh : 分子構造模型を用いた新しい創成科目をめざして, 平成17年度工学・工業教育研究講演会講演論文集, 492-493, Sep. 2005.
275.	金明吉, Usuke Fukumoto, Masahiro Katoh, Toshihide Horikawa and Tahei Tomida : 焼却飛灰に含まれる重金属の酸による溶出挙動, 分離技術会年会2005, Jun. 2005.
276.	Seiji Hamanaka, Toshihide Horikawa, Masahiro Katoh and Tahei Tomida : 超音波霧化によるエタノール水溶液の濃縮分離, 化学工学会第70年会, Mar. 2005.
277.	岡野伸章, 礒田隆司, Masahiro Katoh, 伊藤信成 and Tahei Tomida : 赤外領域におけるアウトガスによる光学面への分子汚染, 日本化学会第85春季年会, Mar. 2005.
278.	金明吉, 福本祐介, 王陸軍, Masahiro Katoh and Tahei Tomida : 焼却飛灰に含まれる重金属の溶出, 化学工学会山口下関大会, Sep. 2004.
279.	辻元隆仁, 一丸貴人, Masahiro Katoh and Tahei Tomida : 充填層型光触媒反応器の水中溶存有機物質分解特性, 化学工学会山口下関大会, Sep. 2004.
280.	Yuichiro Murakami, Kei-ichiro Murai, Masahiro Katoh, Toshihiro Moriga, Eiji Kanezaki, Suminori Tanaka and Ichiro Nakabayashi : PdO/chi-Al₂O₃触媒へのCeO₂添加効果, 化学工学会山口下関大会, Sep. 2004.
281.	hironori aihara, Masahiro Katoh, Kei-ichiro Murai, Toshihiro Moriga, Toshihide Horikawa and Tahei Tomida : Crを含むメソポーラスシリカの分光学的研究, 化学工学会山口下関大会, Sep. 2004.
282.	川上茂雄, Masahiro Katoh, Toshihiro Moriga, Shigeru Sugiyama, Ichiro Nakabayashi, 折原正直 and 田中住典 : 酸化触媒ゲーサイトの結晶構造変化とその分光学的研究, 第5回中国四国支部分析化学若手セミナー, Aug. 1999.
283.	折原正直, 東桂子, Masahiro Katoh, Toshihiro Moriga, Shigeru Sugiyama, Ichiro Nakabayashi and 田中住典 : ゲーサイトを用いたメタン酸化反応とその分光学的研究, 化学工学会徳島大会, Jul. 1999.

Et cetera, Workshop:

1.	SHIMA Takahiro, Takafumi Hanada, Masahiro Katoh and 後藤雅宏 : 疎水性深共晶溶媒の分子間相互作用が貴金属の抽出分離に及ぼす影響, 第26回化学工学会学生発表会, Mar. 2024.
2.	TAKI Kotaro, Takafumi Hanada, Masahiro Katoh and 後藤雅宏 : オキシム配位子を組み込んだ深共晶溶媒の創製とニッケル分離への応用, 第26回化学工学会学生発表会, Mar. 2024.
3.	Hinata Sato, Moe Kudo, Toru Oda, Hayato Nakanishi, Takafumi Hanada, Masahiro Katoh and Kenji Ohnishi : Effects of micro polishing on the different direction for a flow of the water to the SUS surface on boiling promotion, 第26回化学工学会学生発表会, Mar. 2024.
4.	Hikaru Oguri, Daiki Hatakeyama, Takafumi Hanada, Masahiro Katoh, Yasunori Oumi and Kazuyuki Nakai : Preparation of oriented silicalite-1 membrane by secondary growth with changing temperature, 第26回化学工学会学生発表会, Mar. 2024.
5.	Yukito Iwai, Tsuyoshi Shijiraya, Takafumi Hanada and Masahiro Katoh : Preparation of Pd membrane by electroless plating on porous SUS tube with synthetic mica particles, 第26回化学工学会学生発表会, Mar. 2024.
6.	Seiki Ogihara, Seduna Hyuga, Takafumi Hanada, Masahiro Katoh, Yasunori Oumi and Kazuyuki Nakai : Study of synthetic conditions on preparation of silicalite-1 membrane by gel-less method, 第26回化学工学会学生発表会, Mar. 2024.
7.	Masahiro Katoh : 無機多孔質素材を用いたカーボンニュートラルへの 2つのアプローチ, カーボンニュートラル研究成果事業化促進フォーラム, Dec. 2023. (Summary) 関西広域連合主催のカーボンニュートラル研究成果事業化促進フォーラムが大阪で開催された．カーボンニュートラルの実現に向け，①セラミックス系多孔質管上に形成したゼオライト膜による二酸化炭素の直接回収と，②多孔質SUS管上に形成したパラジウム膜による水素製造の2つのアプローチを紹介する．特に，無機多孔質素材の組成，孔径やその分布がガスの分離性を支配することから，無機多孔質素材開発の重要性を訴えた．
8.	Seduna Hyuga, Sora Akagi, Masahiro Katoh, Yasunori Oumi and Kazuyuki Nakai : 形状の異なる種結晶を用いた二次成長によるシリカライト膜の成膜と二酸化炭素の分離能,, 第25回化学工学会学生発表会, Mar. 2023.
9.	Moe Kufo, TOHRU Oda, Masahiro Katoh, Kenji Ohnishi, Mori Masahi and Yasuyuki Takata : Elucidation of the forced flow boiling promotion mechanism on SUS thjn films with micro polishing, 第25回化学工学会学生発表会, Mar. 2023.
10.	Tsuyoshi Shijiraya, Chika Tanaka and Masahiro Katoh : Durability enhancement of dense Pd membrane by vacuum-assisted electroless plating on porous SUS tube with USY zeolite particles, 第25回化学工学会学生発表会, Mar. 2023.
11.	Tohru Oda, Masahiro Katoh and Kenji Ohnishi : マイクロ研磨加工を施したSUS製伝熱面での強制流動沸騰促進機構の解明, 中四国支部産学合同コロキウム 2022, Sep. 2022.
12.	Koshi Seike, Chika Tanaka and Masahiro Katoh : ルチル型チタニアを導入した多孔質SUS管への吸引法を伴う無電解めっきによるPd膜の形成, 中四国支部産学合同コロキウム 2022, Sep. 2022.
13.	Daiki Hatakeyama, Sora Akagi, Masahiro Katoh, Yasunori Oumi and Kazuyuki Nakai : 二酸化炭素分離における透過性向上を目指したシリカライト膜の成膜, 中四国支部産学合同コロキウム 2022, Sep. 2022.
14.	Koshi Seike, Chika Tanaka and Masahiro Katoh : Preparation of dense Pd membrane by vacuum-assisted electroless plating on porous SUS tube with titanium, 第24回化学工学会学生発表会, Mar. 2022.
15.	Daiki Hatakeyama, Sora Akagi, Masahiro Katoh, Yasunori Oumi and Kazuyuki Nakai : Separation properties of carbon dioxide by silicalite-1 membrane prepared on porous alumina supports, 第24回化学工学会学生発表会, Mar. 2022.
16.	Tomoya Kozai, Katsumi Terasaki and Masahiro Katoh : 多孔質SUS支持体上に導入するゼオライト系微粒子の探索とパラジウムの薄膜化, 第14回中四国若手CE合宿, Aug. 2021.
17.	Sora Akagi, Taiyou Yamauchi, Masahiro Katoh and Kazuyuki Nakai : 多孔質SUS管状支持体へのシリカライト膜の成膜と二酸化炭素の分離性, 第14回中四国若手CE合宿, Aug. 2021.
18.	Ryota Takahashi, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Metal-support interaction effect and structure analysis of alumina supported Ni catalysts, 第23回化学工学会学生発表会, Mar. 2021.
19.	Chika Tanaka, Yoshiki Inadu, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Preparation of dense Pd membranes by vacuum-assisted electroless plating on porous SUS tube with spherical silica particles, 第23回化学工学会学生発表会, Mar. 2021.
20.	Tomoya Kozai, Katsumi Terasaki, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Search of zeolite particles introduced on porous SUS tubes for preparation of palladium thin membranes, 第23回化学工学会学生発表会, Mar. 2021.
21.	Sora Akagi, Taiyou Yamauchi, Masahiro Katoh, Naohiro Shimoda, Shigeru Sugiyama and Kazuyuki Nakai : Separation properties of carbon dioxide by silicalite membranes prepared on porous SUS tube, 第23回化学工学会学生発表会, Mar. 2021.
22.	Takeru Ishimoto, Kenta Imanishi, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Takaiku Yamamoto and Jhy-Chern Liu : Effect of Adding Alkali to Nitric Acid Eluate of Dephosphorization Slag, 第23回化学工学会学生発表会, Mar. 2021.
23.	Kazuki Hashimoto, Ikumi Okitsu, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Effect of Catalyst Preparation for Silver-Supported Catalyst on Epoxidation of Propylene, 第23回化学工学会学生発表会, Mar. 2021.
24.	Akihiko Koizumi, Tashu Yoshida, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Dehydrogenation of Isobutane over Nickel Oxide Catalyst Supported on α-Alumina, 第23回化学工学会学生発表会, Mar. 2021.
25.	Riku Okawa, Mizuho Yoshida, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Preparation of Oxygen-Containing Compounds by Catalytic Partial Oxidation of Propane, 第23回化学工学会学生発表会, Mar. 2021.
26.	Yuka Hiwada, Shino Endo, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Activity Behavior of Palladium-Supported Catalyst for Hydrogenation Dechlorination Reaction of 2-Chloropropene, 第23回化学工学会学生発表会, Mar. 2021.
27.	Masahiro Katoh : 水素製造用パラジウムの薄膜化を実現する微粒子工学的アプローチ, グリーン・イノベーション研究成果企業化促進フォーラム, Jan. 2021. (Summary) 関西広域連合主催のグリーン・イノベーション研究成果企業化促進フォーラムがオンライン開催された．我々は，表面を平滑化した多孔質SUS管上に成膜することでパラジウム膜の薄膜化を実現している．本講演では表面平滑化のための微粒子工学的アプローチを紹介した．
28.	Teppei Moroyama, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Catalytic Activity of Metal-supported Catalysts for Hydrogenation of 2-Chloropropene, 石油学会中国四国支部第38回講演会若手講演会「次世代研究者セッション」, Nov. 2020.
29.	Masahiro Aki, Yamaji Mai, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Study in Catalytic Performance and Degradation Behavior of FER-type Zeolite for Methanol to Dimethyl Ether Reaction, 第22回化学工学会学生発表会(岡山大会), Mar. 2020.
30.	Mizuno Masayuki, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Performance and sulfur poisoning resistance of Birdcage-type silicalite catalyst encapsulated platinum nanoparticles for dry reforming of methane, 第22回化学工学会学生発表会(岡山大会), Mar. 2020.
31.	Katsumi Terasaki, Yoshiki Inadu, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Introduction of commercial NaA zeolite powders into porous SUS tube for Pd thin membrane, 第22回化学工学会学生発表会(岡山大会), Mar. 2020.
32.	Tashu Yoshida, Kanta Oribe, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Development of Metal-modified Alumina Catalysts with Catalyst Degradation Resistance against Catalytic Dehydrogenation of Isobutane, 第22回化学工学会学生発表会(岡山大会), Mar. 2020.
33.	Mizuho Yoshida, Mika Miyake, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effect of Ce Introduction into Bi-Mo Composite Oxide Catalysts for Acrolein Synthesis, 第22回化学工学会学生発表会(岡山大会), Mar. 2020.
34.	Teppei Moroyama, Shino Endo, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Synthesis of 2-Chloropropane by Catalytic Hydrogenation of 2-Chloropropene, 第22回化学工学会学生発表会(岡山大会), Mar. 2020.
35.	Masahiro Hojo, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : アルミニウムドロスを担体材料に利用したアンモニア分解触媒の開発, 第13回中四国若手CE合宿, Sep. 2019.
36.	Taiyo Yamauchi, Daiki Mine, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura, Naohiro Shimoda and Shigeru Sugiyama : 微細加工を施したSUS製プレート面における水の沸騰伝熱促進挙動の可視化, 第13回中四国若手CE合宿, Sep. 2019.
37.	Yoshiki Inadu, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : 中間層として導入するチタニアの粒子特性が多孔質SUS管上でのPd膜形成に与える影響, 第13回中四国若手CE合宿, Sep. 2019.
38.	En-Hong Liu, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Jhy-Chern Liu and Yuki Hiraga : Phosphorus from Chicken Manure Incineration Ash by Acid Leaching, 第13回中四国若手CE合宿, Sep. 2019.
39.	Ikumi Okitsu, Yasunori Hayashi, Naohiro Shimoda, Masahiro Katoh, Akihiro Furube, Shigeru Sugiyama and Wataru Ninomiya : Effect of Active Oxygen on Oxidative Coupling of Methane on MgO, 第13回中四国若手CE合宿, Sep. 2019.
40.	Shino Endo, Kenta Oribe, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Isobutene Synthesis from Isobutane via Dehydrogenation in the Presence of CO2 on Metal-supported Catalysts, 第13回中四国若手CE合宿, Sep. 2019.
41.	Mika Miyake, Mizuho Yoshida, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effect of Ce Addition on the Partial Oxidation of Propylene on Bi-Mo Complex Oxide Catalysts, 第13回中四国若手CE合宿, Sep. 2019.
42.	Yasunori Hayashi, Ikumi Okitsu, Naohiro Shimoda, Masahiro Katoh, Akihiro Furube, Shigeru Sugiyama and Wataru Ninomiya : Partial Oxidation Methane on Sm2O3 in the presence of Active Oxygen Generated by UV Radiation, 第13回中四国若手CE合宿, Sep. 2019.
43.	Taiyou Yamauchi, Daiki Mine, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura, Naohiro Shimoda and Shigeru Sugiyama : Elucidation of local boiling heat transfer mechanism of water caused on micro-fabricated SUS transfer surface by visualizing flowheat, 第21回化学工学会学生発表会(京都大会), Mar. 2019.
44.	Yoshiki Inadu, Kota Ominami, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : Preparation of thin palladium membrane on porous SUS tube surface smoothed by introducing of anatase-type titania powder, 第21回化学工学会学生発表会(京都大会), Mar. 2019.
45.	Shino Endo, Kenta Oribe, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Dehydrogenation of Isobutane on Ni or Cr-doped Catalysts in the Presence of CO2, 第21回化学工学会学生発表会(京都大会), Mar. 2019.
46.	Ikumi Okitsu, Yasunori Hayashi, Naohiro Shimoda, Masahiro Katoh, Toshihiro Okamoto, Akihiro Furube, Shigeru Sugiyama and Wataru Ninomiya : Catalytic Oxidation of Methane in the Presence of Active Oxygen, 第21回化学工学会学生発表会(京都大会), Mar. 2019.
47.	Miyu Nomura, Masahiro Katoh, Naohiro Shimoda, Shigeru Sugiyama and Kazuyuki Nakai : 多孔質SUS管型支持体上に成膜されたゼオライト膜へのガスの吸着および透過挙動の評価, 化学工学会中国四国支部・関西支部合同徳島大会2018, Dec. 2018.
48.	Daiki MIne, Taiyou Yamauchi, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura, Naohiro Shimoda and Shigeru Sugiyama : 微細加工を施したSUS製伝熱面がもたらす水の局所沸騰伝熱促進機構の可視化による解明, 化学工学会中国四国支部・関西支部合同徳島大会2018, Dec. 2018.
49.	Kenta Oribe, Shino Endo, Yuki Kato, Wataru Ninomiya, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Dehydrogenation of Isobutane in the Presence of CO2 on Al2O3 doped with Ni and Cr Oxides, 化学工学会中国四国支部・関西支部合同徳島大会2018, Dec. 2018.
50.	Rayan Elbakhit Hamid Gasmalla, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuka Arai and Masamori Akamatsu : Effect of Supports on Formation Behaviour of Ammonia in Wet Decomposition of Nitrite on Palladium Catalyst, 化学工学会中国四国支部・関西支部合同徳島大会2018, Dec. 2018.
51.	Kenji Wakisaka, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Recovery of Phosphate Rock Equivalents from Incineration Ash of Chicken Manure by Elution-precipitation Treatment, 化学工学会中国四国支部・関西支部合同徳島大会2018, Dec. 2018.
52.	Sho Shimazu, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Oxidative Dehydrogenation of Isobutane over Mesoporous Silicas Modified with Vanadium, 第28回キャラクタリゼーション講習会, Nov. 2018.
53.	Mika Miyake, Hikari Sumida, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Effects of Preparation Methods of Bi-Mo Complex Oxide Catalysts on the Partial Oxidation of Propylene, 第12回中四国若手CE合宿, Sep. 2018.
54.	Kenta Oride, Shino Endo, Naohiro Shimoda, Masahiro Katoh, Shigeru Sugiyama, Yuki Kato and Wataru Ninomiya : Dehydrogenation on Isobutane on Metal-doped γ-Al2O3 Catalysts, 第12回中四国若手CE合宿, Sep. 2018.
55.	Yasuhiro Sakuwa, Naohiro Shimoda, Masahiro Katoh and Shigeru Sugiyama : Direct Gas-phase Oxidation of Propylene on Ag-doped Catalysts, 第12回中四国若手CE合宿, Sep. 2018.
56.	Yasunori Hayashi, Ikumi Okitsu, Naohiro Shimoda, Masahiro Katoh, Toshihiro Okamoto, Akihiro Furube, Shigeru Sugiyama and Wataru Ninomiya : Methane Oxidation in the Presence of Active Oxygen Formed Using UV Radiation, 第12回中四国若手CE合宿, Sep. 2018.
57.	Kota Ominami, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : ルチル型チタニア微粒子の分散性が多孔質SUS表面の平滑化に与える影響, 第12回中四国若手CE合宿, Sep. 2018.
58.	Kota Aoyagi, Masahiro Katoh, Naohiro Shimoda and Shigeru Sugiyama : 酸処理がもたらすシリコアルミノリン酸塩系ゼオライトの水蒸気吸脱着性能の向上, 第12回中四国若手CE合宿, Sep. 2018.
59.	Kota Aoyagi, Kota Horiuchi, Masahiro Katoh and Shigeru Sugiyama : Preparation of mesoporous silico-alumino-phosphate zeolite and the adsorption desorption behavior of water, 第20回化学工学会学生発表会(東広島大会), Mar. 2018.
60.	Kenta Oribe, Yuki Kato, Wataru Ninomiya, Masahiro Katoh and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane over Mesoporous Silicas Modified with Bismuth -Molybdenum, 第20回化学工学会学生発表会(東広島大会), Mar. 2018.
61.	Tatuya Tsuboi, Yuka Arai, Masamori Akamatsu, Masahiro Katoh and Shigeru Sugiyama : Behavior of Ammonia Formation during Reductive Decomposition of Nitrite over Pd/C, 第20回化学工学会学生発表会(東広島大会), Mar. 2018.
62.	Yasunori Hayashi, Masahiro Katoh and Shigeru Sugiyama : Epoxidation of Propylene over ZSM-5 and Related Catalysts, 第20回化学工学会学生発表会(東広島大会), Mar. 2018.
63.	Mika Miyake, Masahiro Katoh and Shigeru Sugiyama : Partial Oxidation of Propylene over Bi-Mo Complex Oxide Catalysts, 第20回化学工学会学生発表会(東広島大会), Mar. 2018.
64.	Masahiro Katoh : 本フォーラムがつなぐパラジウム膜型水素製造器の量産化技術, グリーン・イノベーション研究成果企業化促進フォーラム, 60-69, Dec. 2017. (Summary) 本稿は関西広域連合主催のグリーン・イノベーション研究成果企業化促進フォーラムが大阪のナレッジキャピタルコングレコンベンションセンターで開催された際，招待講演時に用いたパワーポイントをまとめたものである．特に．パラジウム膜型水素製造器を量産化するために不可欠な3つの技術，(1)膜の支持体，(2)支持体細孔を制御するセラミックス系微粒子，(3)めっき技術を紹介し，聴衆の注目を集めた．
65.	Naoto Yamada, Daiki Mine, Norimasa Yoshida, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura and Shigeru Sugiyama : 微細加工を施したSUS製プレート表面における沸騰熱伝達機構の解明をめざした流路内可視化の試み, 化学工学会中国四国支部大会山口大会2017, Dec. 2017.
66.	Shinya Nitta, Yuki Kato, Sho Shimazu, Kenta Oribe, Masahiro Katoh, Wataru Ninomiya and Shigeru Sugiyama : Oxidative Dehydrogenation of Isobutane on Mo-based Catalysts, 化学工学会中国四国支部大会山口大会2017, Dec. 2017.
67.	Yuki Nakao, Kohta Nagai, Mika Miyake, Masahiro Katoh and Shigeru Sugiyama : Partial Oxidation of Propylene on Bismuth-molybdenum Catalysts, 化学工学会中国四国支部大会山口大会2017, Dec. 2017.
68.	Yasuhiro Sakuwa, Tomoyasu Ogino, Yasunori Hayashi, Masahiro Katoh and Shigeru Sugiyama : Epoxidation of Propylene on Porous Catalysts, 化学工学会中国四国支部大会山口大会2017, Dec. 2017.
69.	Kenji Wakisaka, Masahiro Katoh and Shigeru Sugiyama : Recovery of Calcium Phosphate from Composted Chicken Manure, 化学工学会中国四国支部大会山口大会2017, Dec. 2017.
70.	Masahiro Katoh : オンサイト水素製造に適したパラジウム膜型水素製造器の量産化技術, 水素グローカルエキスポ in とくしま, 21, Nov. 2017. (Summary) 本稿は徳島県主催の水素グローカルエキスポ in とくしまが徳島のアスティとくしまで開催された際，依頼出展時に用いたパワーポイントをまとめたものである．特に．パラジウム膜水素製造器を量産化するための3つの要素技術が聴衆の注目を集めた．
71.	Yasuhiro Sakuwa, Yasunori Hayashi, Tomoyasu Ogino, Masahiro Katoh and Shigeru Sugiyama : Partial Oxidation of Plopylene on Various Mesoporous Silicas Based on SBA-15, 第11回触媒道場, Sep. 2017.
72.	Tomoe Ueshima, Masahiro Katoh and Shigeru Sugiyama : パラジウム膜の水素拡散性向上をもたらすシリカライト中間層のアルカリ処理条件の検討, 第11回中四国若手CE合宿, Aug. 2017.
73.	Daiki Mine, Naoto Yamada, Norimasa Yoshida, Masahiro Katoh, Kenji Onishi, Daisuke Yonekura and Shigeru Sugiyama : 微細加工を施したSUS製プレートがもたらす水の伝熱促進挙動, 第11回中四国若手CE合宿, Aug. 2017.
74.	Kenji Wakisaka, Masahiro Katoh and Shigeru Sugiyama : コンポスト化鶏糞の酸処理によるリンの回収, 第11回中四国若手CE合宿, Aug. 2017.
75.	Kohta Nagai, Yuki Nakao, Masahiro Katoh and Shigeru Sugiyama : ブテン類の酸化脱水素反応におけるBi-Mo系酸化物触媒のモリブデン含有量の影響, 第11回中四国若手CE合宿, Aug. 2017.
76.	Tomoyasu Ogino, Yasuhiro Sakuwa, Masahiro Katoh and Shigeru Sugiyama : 多孔質触媒であるH-ZSM-5によるプロピレンのエポキシ化反応, 第11回中四国若手CE合宿, Aug. 2017.
77.	Shigeru Sugiyama, Yuto Tsuchiya, Gasmalla Hamid Elbakhit Rayan and Masahiro Katoh : 常固定床流通式反応装置による亜硝酸性窒素の湿式還元分解と問題点, 第11回中四国若手CE合宿, Aug. 2017.
78.	Daiki Mine, Naoto Yamada, Norimasa Yoshida, Masahiro Katoh, Kenji Ohnishi, Daisuke Yonekura, and Shigeru Sugiyama : Heat transfer enhancement behavior of micro fabricated SUS plate for water boiling conditions, 第19回化学工学会学生発表会(豊中大会), Mar. 2017.
79.	Megumi Harai, Masahiro Katoh, and Shigeru Sugiyama : Preparation of thin palladium membrane on porous SUS support having relatively large pores by introducing intermediate layers, 第19回化学工学会学生発表会(豊中大会), Mar. 2017.
80.	Tomoe Ueshima, Masahiro Takatani, Masahiro Katoh, and Shigeru Sugiyama : Alkali treatment of silicalite intermediate layer for hydrogen diffusion enhancement on Pd membrane prepared over porous SUS tube, 第19回化学工学会学生発表会(豊中大会), Mar. 2017.
81.	Ryuta Miyake, Yuki Sanada, Masahiro Katoh, Katsuko Matsui, Hiroyuki Kajimoto, Shingo Nishiki, Kuniaki Otsuka, and Shigeru Sugiyama : Challenge of preparation of Pd thin membrane over porous SUS tube using commercial Pd plating reagent, 第19回化学工学会学生発表会(豊中大会), Mar. 2017.
82.	Sho Shimazu, , Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Oxidative dehydrogenation of isobutane on MCM-48 doped with Al, 第19回化学工学会学生発表会(大阪大会), Mar. 2017.
83.	Yasuhiro Sakuwa, , Masahiro Katoh and Shigeru Sugiyama : Partial oxidation of propylene on porous oxide catalysts, 第19回化学工学会学生発表会(大阪大会), Mar. 2017.
84.	Yuki Nakao, , Masahiro Katoh and Shigeru Sugiyama : Oxidative dehydrogenation of butenes on bismuth-molybdenum complex oxide catalysts, 第19回化学工学会学生発表会(大阪大会), Mar. 2017.
85.	Masahiro Katoh : 貴金属使用量を大幅削減した水素製造パラジウム膜型反応器の開発, グリーン・イノベーション研究成果企業化促進フォーラム, 64-73, Dec. 2016. (Summary) 本稿は関西広域連合主催のグリーン・イノベーション研究成果企業化促進フォーラムが大阪のナレッジキャピタルコングレコンベンションセンターで開催された際，招待講演時に用いたパワーポイントをまとめたものである．特に．パラジウム膜の支持体として用いる多孔質SUSチューブにシリカ系中間層を導入することで貴金属であるパラジウムの使用量を大幅に削減できる点が，聴衆の注目を集めた．
86.	Naozumi Fukushima, Yuto Tsuchiya, Aika Masuda, , Masahiro Katoh, Shigeru Sugiyama, Yuka Arai, Yukimi Hayashi and Masamori Akamatsu : Preparation of Structural Catalysts for the Reduction on Nitrite in Aqueous Phase, 化学工学会中国四国支部・関西支部合同支部大会(大学院生発表会), Dec. 2016.
87.	kota Horiuchi, Ayaka Satoh, Masahiro Katoh, and Shigeru Sugiyama : 低温排熱の有効利用をめざしたAlPO系水蒸気吸着材の金属置換, 第10回中四国若手CE合宿, Sep. 2016.
88.	Hisanobu Misu, Shinya Nitta, Takuya Ehiro, , Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : SBA-15の調製法とイソブタン酸化脱水素触媒活性, 第10回中四国若手CE合宿, Sep. 2016.
89.	Naozumi Fukushima, Yuto Tsuchiya, , Masahiro Katoh, Shigeru Sugiyama, Yuka Arai, Yukimi Hayashi and Masamori Akamatsu : 表面改質Pd構造体触媒による亜硝酸性窒素の湿式還元分解, 第10回中四国若手CE合宿, Sep. 2016.
90.	Hisataka Sakamoto, Tomoyasu Ogino, , Masahiro Katoh and Shigeru Sugiyama : チタン修飾MCM-41によるプロピレンの部分酸化反応, 第10回中四国若手CE合宿, Sep. 2016.
91.	Yuto Tsuchiya, Naozumi Fukushima, Masatomo Fukui, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuka Arai, Yukimi Hayashi and Yasamori Akamatsu : Reductive decomposition of nitrite using structural catalyst to avoid pressure drop, 第18回化学工学会学生発表会(福岡大会), Mar. 2016.
92.	Shinji Nakahara, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Evaluation of adsorption-desorption behavior of water or ethanol on zeolite membranes, 第18回化学工学会学生発表会(福岡大会), Mar. 2016.
93.	Naoto Yamada, Norimasa Yoshida, Masahiro Katoh, Kenji Onishi, Daisuke Yonekura, Keizo Nakagawa and Shigeru Sugiyama : Heat transfer characteristics of water boiling in a microfabricated SUS plate, 第18回化学工学会学生発表会(福岡大会), Mar. 2016.
94.	Masahiro Katoh : パラジウム膜型反応器を用いたオンサイト水素製造プロセスの開発, グリーン・イノベーション研究成果企業化促進フォーラム, 73-82, Dec. 2015. (Summary) 本稿は関西広域連合主催のグリーン・イノベーション研究成果企業化促進フォーラムが大阪のナレッジキャピタルコングレコンベンションセンターで開催された際，招待講演時に用いたパワーポイントをまとめたものである．特に．パラジウム膜の支持体として用いる多孔質SUSチューブの性能が分離性能を大きく左右する点が，聴衆の注目を集めた．
95.	Yusuke Minato, Seiya Nii, Hikaru Sugiura, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Challenge of preparation of palladium thin membrane over porous SUS support introduced double intermediate layers with MCM-48 and alumina, 化学工学会中国四国支部・関西支部合同支部大会(大学院生発表会), Dec. 2015.
96.	Norimasa Yoshida, Naoto Yamada, Masahiro Katoh, Kenji Onishi, Daisuke Yonekura, Keizo Nakagawa and Shigeru Sugiyama : Heat transfer enhancement by using micro fabricated SUS plate evaporator, 化学工学会中国四国支部・関西支部合同支部大会(大学院生発表会), Dec. 2015.
97.	Suguru Nishida, Tomoya Hoshinoo, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Cyclohexane dehydrogenation of carbon-supported Pt catalysts covered with cubic mesoporous silica, 化学工学会中国四国支部・関西支部合同支部大学院生発表会, Dec. 2015.
98.	Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Oxidative Dehydrogenation of Isobutane on Chromia Supported on Calcium Phosphates, 化学工学会中国四国支部・関西支部合同支部大学院生発表会, Dec. 2015.
99.	Naotaka Ohtake, Yoshiki Yamane, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Ethanol Dehydration on Hydrothermally Prepared Ceria with a High Specific Surface Area, 化学工学会中国四国支部・関西支部合同支部大学院生発表会, Dec. 2015.
100.	Masahiro Takanani, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : 多孔質SUS管へのPd薄膜の製膜をめざしたシリカライトとアルミナの複層化した中間層の導入, 第9回中四国若手CE合宿, Sep. 2015.
101.	Yuki Sanada, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Pd薄膜形成のためのA型ゼオライトとアルミナを複層化した中間層の多孔質SUS管への導入, 第9回中四国若手CE合宿, Sep. 2015.
102.	Ayaka Satoh, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : 水蒸気吸着性能の向上をめざしたアルミノリン酸塩系ゼオライトの金属置換, 第9回中四国若手CE合宿, Sep. 2015.
103.	Akira Yoshida, Yuka Arai, Yumi Kikkawa, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Improvement in eution residence of phosphoric acid of polyphosphoric acid catalysts by coverage with silica layers, 第9回中四国若手CE合宿, Sep. 2015.
104.	Yuta Takeuchi, Atsushi Tenshin, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Preparation of silicalite membrane for pervaporation of bio-ethanol from waste solution, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
105.	Masahiro Takanani, Atsushi Tenshin, Seiya Nii, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Preparation of palladium membrane on porous stainless steel tube with silicalite intermediate layer, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
106.	Yuki Sanada, Yusuke Minato, Seiya Nii, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Preparation of palladium membrane on porous stainless steel support with double intermediate layers, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
107.	Hiroharu Yamashita, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Formation of niobate nanosheets with different sheet thickness by a bottom-up approach, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
108.	Akira Yoshida, Yuka Arai, Yumi Kikkawa, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Preparation of alumina supported polyphosphoric acid catalysts covered with silica and dissolution resistance of polyphosphoric acid, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
109.	Saki Hiraoka, Naoya Motoki, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Motonari Adachi, Hiroshi Matsuo and Fumio Uchida : Preparation and Electric Generation Characteristics of photoelectrode for Dye-Sensitized Solar Cells Using Flaky Titanium Oxide Nanosheets, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
110.	Hisanobu Misu, Takuya Ehiro, Ai Itagaki, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : Effect of doping with Cr-doping of MCM-41 on structure and catalytic activity, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
111.	Naozumi Fukushima, Masatomo Fukui, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yukimi Hayashi and Masamori Akamatsu : Effect of supports on reductive decomposition of nitrite over Pd-supported catalysts, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
112.	Naotaka Sakamoto, Yuya Nagai, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Preparation of 1,3-butadiene from oxidative dehydrogenation of C4 hydrocarbons on solid oxide catalysts, 第17回化学工学会学生発表会(徳島大会), Mar. 2015.
113.	Mao Sugino, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : 赤外分光法による水蒸気吸着量の温度依存性の迅速評価, 化学工学会中国四国支部大学院生発表会, Dec. 2014.
114.	Yoshiki Tezuka, Takuya Ohshima, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Low temperature PM combustion of CuO/CeO2 catalysts by controlling the morphology of CeO2, 化学工学会中国四国支部大学院生発表会, Dec. 2014.
115.	Masatomo Fukui, Naozumi Fukushima, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yukimi Furukawa, Masamori Akamatsu and Yasuhisa Kawamoto : Effects of Support on Reduciable Decomposition of Nitrite Nitrogen on Pd-Supported Catalysts, 化学工学会中国四国支部大学院生発表会, Dec. 2014.
116.	Yuya Nagai, Naotaka Sakamoto, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Oxidative Dehydrogenation of n-Butane on Metallic Complex Oxides, 化学工学会中国四国支部大学院生発表会, Dec. 2014.
117.	Yoshiki Yamane, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : FSM-16によるバイオマス原料から化成品前駆体の接触合成および水素添加効果, 第24回キャラクタリゼーション講習会, Oct. 2014.
118.	Ai Itagaki, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : イオン交換法で調製したCr-FSM-16のキャラクタリゼーションとイソブタン酸化脱水素活性, 第24回キャラクタリゼーション講習会, Oct. 2014.
119.	Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama and Shik Chi Edman Tsang : ボトムアップ法を利用した単分子ニオブ酸シート光触媒の研究紹介, 日本海水学会若手会海水・生活・化学連携シンポジウム, Sep. 2014.
120.	Keizo Nakagawa, Yoshiki Tezuka, Masahiro Katoh and Shigeru Sugiyama : ルースコンタクト調製方法が及ぼすPM燃焼特性への影響, 第35回参照触媒討論会 PM酸化除去触媒評価の標準化プロジェクト, Sep. 2014.
121.	Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama and Shik Chi Edman Tsang : 単分子層ニオブ酸シートの合成と水の光分解による水素製造, 第8回中四国若手CE合宿, Aug. 2014.
122.	Suguru Nishida, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : シクロヘキサン脱水素反応中での劣化挙動とPd触媒のシリカ被覆処理, 第8回中四国若手CE合宿, Aug. 2014.
123.	Atsushi Tenshin, Kyosuke Matsutani, Yuta Takeuchi, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : シリカライト膜を用いた浸透気化法によるエタノール分離, 第8回中四国若手CE合宿, Aug. 2014.
124.	Ayaka Satoh, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : ZSM-5ゼオライトへのアルカリ処理が水蒸気吸着挙動に与える影響, 第8回中四国若手CE合宿, Aug. 2014.
125.	Mao Sugino, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : 省エネルギー型除湿材の開発に資する水蒸気吸着挙動評価法の提案, 第8回中四国若手CE合宿, Aug. 2014.
126.	Haruka Kinoshita, Ryuta Kitora, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : 使用済蛍光管からの希少資源の回収, 第8回中四国若手CE合宿, Aug. 2014.
127.	Yusuke Seno, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : プロピオンアルデヒドの酸化的エステル化反応における触媒担体効果, 第8回中四国若手CE合宿, Aug. 2014.
128.	Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou and Wataru Ninomiya : MCM-41系触媒によるイソブタンの酸化脱水素反応, 第8回中四国若手CE合宿, Aug. 2014.
129.	Ryuta Kitora, Haruka Kinoshita, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama and Kiyohiko Nakasaki : コンポスト化鶏糞からリン酸カルシウムの回収, 第8回中四国若手CE合宿, Aug. 2014.
130.	Yoshiki Tezuka, Takuya Ohshima, Megumi Katayama, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Effects of morphology control of CeO2 for catalytic soot combustion over CuO/CeO2, 触媒学会西日本支部第 5 回触媒科学研究発表会, Jun. 2014.
131.	Takuya Ehiro, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : Oxidative Dehydrogenation of Isobutane on MCM-41 Doped and Undoped with Heavy Metals, 石油学会第19回JPIJS若手研究者のためのポスターセッション, May 2014.
132.	Ayaka Satoh, Mao Sugino, Michisato Kimura, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Water Adsorption Behavior of Alkali Treated ZSM-5 Zeolites, 第16回化学工学会学生発表会(堺大会), Mar. 2014.
133.	Kyosuke Matsutani, Atsushi Tenshin, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : Study of preparation conditions of silicalite membrane for separation of ethanol on pervaporation, 第16回化学工学会学生発表会(堺大会), Mar. 2014.
134.	Haruka Kinoshita, Ryuta Kitora, Ippei Shimoniya, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Recovery and Enrichment of Rare Resources from Powders Obtained from Used Fluorescent Tubes, 第16回化学工学会学生発表会(堺大会), Mar. 2014.
135.	Yoshiki Yamane, Yasuhiro Okada, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : Effect of Hydrogen Addition into the Feed for the Dehydration of Alcohols on FSM-16, 第16回化学工学会学生発表会(堺大会), Mar. 2014.
136.	Yasuhiro Okada, Yoshiki Yamane, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : FSM-16によるC3アルコール類の脱水挙動とキャラクタリゼーション, 化学工学会中国四国支部大会(大学院生発表会), Dec. 2013.
137.	Seiya Nii, Arisa Ishii, Tomoya Hoshinoo, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : パラジウム薄膜の形成を目的とした多孔質SUS支持体へのシリカ系中間層の付与, 第7回中四国若手CE合宿, Sep. 2013.
138.	Naoya Motoki, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : ラメラメソ構造を有する層状チタン酸ナノシートのカーボンピラー化による熱耐久性の向上, 第7回中四国若手CE合宿, Sep. 2013.
139.	Takuya Ehiro, Ai Itagaki, Yoshihisa Nitta, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Oxidative Dehydrogenation os Alkanes on FSM-16 Doped with Chromium, 第7回中四国若手CE合宿, Sep. 2013.
140.	Ai Itagaki, Yoshihisa Nitta, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Oxidative Dehydrogenation os Isobutane on FSM-16 Doped with Chromium, 第7回中四国若手CE合宿, Sep. 2013.
141.	Keizo Nakagawa, Takuya Ohshima, Yoshiki Tezuka, Masahiro Katoh and Shigeru Sugiyama : 参照触媒Ag/CeO2を用いたPM燃焼特性と混合状態のSEM-EDX測定, 第34回参照触媒討論会 PM酸化除去触媒評価の標準化プロジェクト結果報告会, Sep. 2013.
142.	Yoshihisa Nitta, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Effects of the Preparation and Mlding Procedures on the Oxidative Dehydrogenation of Isobutane on Cr-FSM-16 and the Related Catalysts, 第7回触媒道場, Sep. 2013.
143.	Yasuhiro Okada, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara, Toshiya Yasukawa and Wataru Ninomiya : Effects of Molding Procedure of FSM-16 on the Conversion of 1,2-Propandiol to Propanal, 第7回触媒道場, Sep. 2013.
144.	Jun Jitoku, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Effects of Thermal Treatment on Their Mesostructure and Photocatalytic Activity for Layered Titanate Nanosheets with a Lamellar Structure, 触媒学会西日本支部第 4 回触媒科学研究発表会, Jun. 2013.
145.	Yusuke Seno, Takuya Bando, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Oxidative Esterification of Propionaldehyde Useing Palladium Catalysts on the Various Alumina Supports, 触媒学会西日本支部第 4 回触媒科学研究発表会, Jun. 2013.
146.	Ai Itagaki, Yoshihisa Nitta, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Effects of Chromium-doping into FSM-16 on the Oxidative Dehydrogenation of Isobutane, 触媒学会西日本支部第 4 回触媒科学研究発表会, Jun. 2013.
147.	Atsushi Tenshin, Oshie Tsuji, Kyosuke Matsutani, Masahiro Katoh, Keizo Nakagawa and Shigeru Sugiyama : 浸透気化法によるエタノール濃縮に用いるMFI型ゼオライト膜の調製, 第15回化学工学会学生発表会(北九州大会), Mar. 2013.
148.	Ryuta Kitora, Ippei Shinomiya, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Elution and Enrichment of Phosphate from Dephosphorization Slag Using Flow System, 第15回化学工学会学生発表会(北九州大会), Mar. 2013.
149.	Yusuke Seno, Takuya Bando, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Esterification of Propionaldehyde over Palladium Supported on Various Alumina, 第15回化学工学会学生発表会(北九州大会), Mar. 2013.
150.	Ai Itagaki, Yoshihisa Nitta, Keizo Nakagawa, Masahiro Katoh, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Oxidative Dehydrogenation od Isobutane on FSM-16 Doped with Chromium, 第15回化学工学会学生発表会(北九州大会), Mar. 2013.
151.	Masahiro Katoh, Michisato Kimura, Mao Sugino, Keizo Nakagawa and Shigeru Sugiyama : アルカリ処理により拡散性を向上させたY型ゼオライトの水蒸気吸着特性, 第6回中四国若手CE合宿, Dec. 2012.
152.	Yusuke KItahara, Kouji Kinouchi, Arisa Ishii, Takehito Hayashima, Seiya NIi, Masahiro Katoh, Keizo Nakagawa, Shigeru Sugiyama, Takushi Yoshikawa and Mamoru Wada : バイオエタノール改質反応への多孔質SUS管上に製膜したPd-Cu合金膜適用の試み, 第6回中四国若手CE合宿, Dec. 2012.
153.	Satoshi Kubota, Toshihide Horikawa, Ken Yoshida, Masahiro Katoh and Ken-Ichiro Sotowa : NMRを用いたナノ粒子近傍分子の動的挙動観察と粒子相間移動メカニズムの検討, 第6回中四国若手CE合宿, Dec. 2012.
154.	Yuka Arai, Keizo Nakagawa, Ken-Ichiro Sotowa, Shigeru Sugiyama and Masahiro Katoh : Additive Effects of Phosphorous Surfactant on the Formation Process of Hydroxyapatite nanorods, 第6回中四国若手CE合宿, Dec. 2012.
155.	Ippei Shinomiya, Ryuta Kitora, Keizo Nakagawa, Masahiro Katoh and Shigeru Sugiyama : Elution of Phosphorus from Dephosphorization Slag with Flow Operation, 第6回中四国若手CE合宿, Dec. 2012.
156.	Takuya Bando, Yusuke Seno, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Preparation of Methyl Propionate Using Palladium Catalysts in Liquid Phase, 第6回中四国若手CE合宿, Dec. 2012.
157.	Kouji Kinouchi, Tatsuya Kakiuchi, Takahiro Miyake, Masahiro Katoh, Toshihide Horikawa, Keizo Nakagawa and Shigeru Sugiyama : Hydrogen production from ethanol using palladium membrane on porous stainless steel tube, 触媒学会西日本支部第 3 回触媒科学研究発表会, Jun. 2012.
158.	Oshie Tsuji, Erika Nakata, Masahiro Katoh, Toshihide Horikawa, Tatsuya Yamazaki, Keizo Nakagawa, Shigeru Sugiyama, Takushi Yoshikawa and Mamoru Wada : Effects of contaminants on hydrogen production from real bio-ethanol by photocatalytic decomposition, 触媒学会西日本支部第 3 回触媒科学研究発表会, Jun. 2012.
159.	Takuya Ohshima, Megumi Katayama, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Effects of structural control of nanosized CeO2 catalysts for carbon combustion, 触媒学会西日本支部第 3 回触媒科学研究発表会, Jun. 2012.
160.	Tomoya Hoshinoo, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Sintering Resistance and Cyclohexane Dehydrogenation in Batch Reactor of Organosilica-coated Pd Catalysts, 触媒学会西日本支部第 3 回触媒科学研究発表会, Jun. 2012.
161.	Yoshihisa Nitta, Yukimi Furukawa, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Oxidative Dehydrogenation of Alkanes on Oxide Catalysts Using Microreactor, 触媒学会西日本支部第 3 回触媒科学研究発表会, Jun. 2012.
162.	Yasuhiro Okada, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa and Shigeru Sugiyama : Preparation of C4-Species from C2-Species on FSM-16 Doped with Nickel, 触媒学会西日本支部第 3 回触媒科学研究発表会, Jun. 2012.
163.	Takuya Bando, Emiko Watanabe, Keizo Nakagawa, Masahiro Katoh, Ken-Ichiro Sotowa, Shigeru Sugiyama, Yuuki Katou, Shuji Akihara and Wataru Ninomiya : Reaction Pathway on the Oxidative Methylation of Propionaldehyde Using Supported Palladium Catalysts and the Effect of the Supports, 触媒学会西日本支部第 3 回触媒科学研究発表会, Jun. 2012.
164.	坂尾倫幸, Toshihide Horikawa, Masahiro Katoh and Jun'ichi Hayashi : 含窒素メソポーラス材料の調製とその水蒸気吸着特性, Chem-Eng研究会サマーセミナー(2011), Aug. 2011.
165.	Daisuke Nakahara, Toshihide Horikawa and Masahiro Katoh : CVD法によるTiO2薄膜の調製条件の検討, Chem-Eng研究会サマーセミナー(2010), Aug. 2010.
166.	Tomoki Sekida, Toshihide Horikawa, Yoshiyuki Kitakaze, Masahiro Katoh and Jun'ichi Hayashi : 多孔質炭化物への水蒸気吸着に及ぼす表面・細孔特性の影響, Chem-Eng研究会サマーセミナー(2009), Aug. 2009.
167.	Tomoki Sekida, Toshihide Horikawa, Masahiro Katoh and Jun'ichi Hayashi : 炭化物への水蒸気吸着に及ぼす細孔特性の影響, 第3回 Chem-Eng研究会ミニシンポジウム, 14, Mar. 2009.
168.	Takahiro Maegaki, Toshihide Horikawa, Masahiro Katoh and Yoshikazu Miyake : Fe3O4ナノ粒子の水相から油相への相間移動現象に関する研究, 第3回 Chem-Eng研究会ミニシンポジウム, 8, Mar. 2009.
169.	Masahiro Katoh : ナノ多孔体への2成分気体の吸着とその分光学的研究, 第11回吸着シンポジウム講演要旨集, Aug. 1999. (Summary) 本稿は日本吸着学会主催の第11回吸着シンポジウムが秋田大学で開催された際，招待講演として講演した内容をまとめたものである．特に．ナノ多孔体のカチオンサイトに由来する吸着特性を一酸化炭素を含む2成分気体を用いて赤外分光法により検討した研究が，聴衆の注目を集めた．
170.	Masahiro Katoh : ナノ多孔体への混合気体の吸着と特性評価, 平成10年度第2回微細構造研究会資料, Oct. 1998. (Summary) 本稿は化学工学会の微細構造研究会が山形大学工学部で開催された際，講演した内容をまとめたものである．本研究では，赤外分光法を用いた物理化学的取り扱いにより，微細構造体のひとつであるナノ多孔体への混合気体の吸着現象を明らかにしている．

Report:

1.	Masahiro Katoh : 表面近傍にメソ孔をもつ省エネルギー型ゼオライト系除湿材の開発, 2013年度公益財団法人 JFE21世紀財団大学研究助成技術研究報告書, 157-163, Mar. 2013.
2.	Masahiro Katoh, Daisuke Yonekura and Masaya Takahashi : Analysis of Adhesion Behavior of Powder on Polished Steel Plate by New Treatment for Preventing Adhesion, Bulletin of Institute of Technology and Science, The University of Tokushima, No.55, 19-24, Jun. 2010. (Tokushima University Institutional Repository) ● Metadata: 68991 (Tokushima University Institutional Repository: 68991)
3.	Masahiro Katoh, Toshihiro Moriga, Narisuke Mori, Ryota Mashima and Mayu Yamada : Synthesis of Visible Light Driven Photocatalyst and Development of Photocatalytic Environmental Purification Process, Bulletin of Institute of Technology and Science, The University of Tokushima, No.53, 1-7, Jun. 2008. (Tokushima University Institutional Repository) ● Metadata: 59745 (Tokushima University Institutional Repository: 59745)

Patent:

1.	Masahiro Katoh, Daisuke Yonekura and 大西賢治 : 飲用容器, 2017-154238 (Aug. 2017), 2018-29959 (Mar. 2018), 6880361 (May 2021).
2.	Masahiro Katoh, Daisuke Yonekura, 大西賢治, 益田美子, 高井靖拡 and 宮村和憲 : ボウル及びボウルミキサー, 2017-136166 (Jul. 2017), 2019-17265 (Feb. 2019), 6935865 (Aug. 2021).
3.	Masahiro Katoh, Daisuke Yonekura and 大西賢治 : 熱交換器, 2014-266900 (Dec. 2014), 2016-125762 (Jul. 2016), 6390053 (Aug. 2018).
4.	Masahiro Katoh, Masakazu Sanada and Keizo Nakagawa : CATALYST STRUCTURE AND HYDROGEN GENERATOR, 2014-258550 (Dec. 2014), 2016-117028 (Jun. 2016), .
5.	Masahiro Katoh and 堀田雅敏 : 低温脱着材料・その製造方法及び低温脱着方法, 2010-169835 (Jul. 2010), 2012-30152 (Feb. 2012), 5751464 (Aug. 2016).
6.	Masahiro Katoh, Daisuke Yonekura and 大西賢治 : 粉体取扱装置用鋼製部材及び粉体取扱装置, 2007-073841 (Mar. 2007), 2008-230665 (Oct. 2008), 4064438 (Jan. 2008).

Grants-in-Aid for Scientific Research (KAKEN Grants Database @ NII.ac.jp)

Durability enhancement of high hydrogen permeability Pd thin membrane formed by full use of vacuum aspiration on porous SUS support (Project/Area Number: 23K04475 )
Elucidation of remarkable catalytic activity increasing effect of coking in the direct dehydrogenation of isobutane (Project/Area Number: 20K05221 )
Enhancement of durability of palladium membrane having high hydrogen permeability by easy moving ceramic intermediate powders (Project/Area Number: 19K05124 )
Oxidative Dehydrogenation of Alkanes in the Presence of Oxygen Species Activated Using Ultravaiolet Rediation (Project/Area Number: 17K19014 )
Establishment of palladium thin membrane preparation method onto porous SUS introduced pore control layer for high hydrogen diffusion (Project/Area Number: 16K06828 )
Development of layered nanosheet photocatalysts using lamellar phase as a template and their catalytic properties (Project/Area Number: 25420827 )
New approach of preparation of thin and durable Pd membrane by introduction of double silica layers into porous SUS support (Project/Area Number: 25420804 )
Development of surface modification tecchnique for anti-wear and anti-powder adhesion using electron beam (Project/Area Number: 25420020 )
Technology to Control Heterogeneous Catalytic Reactions by Forced Temperature Cycling (Project/Area Number: 19360360 )
Feasibility estimate for UV-light cleaning against the output signal degradation of earth observing sensors on orbit (Project/Area Number: 18560781 )
Development of Methods for Leaching and Recovering Heavy Metal Ions from Fly Ash (Project/Area Number: 15310057 )
Search by Researcher Number (80274257)

Professor : Katoh, Masahiro

Research

Personal Web Page

Field of Study

Subject of Study

Book / Paper

Book:

Academic Paper (Judged Full Paper):

Academic Paper (Unrefereed Paper):

Review, Commentary:

Proceeding of International Conference:

Proceeding of Domestic Conference:

Et cetera, Workshop:

Report:

Patent:

Grants-in-Aid for Scientific Research (KAKEN Grants Database @ NII.ac.jp)